High mechanical and thermal performance of Sasobit-modified epoxy resin,prepared via vacuum shock technique

In this study, thermal and mechanical properties of novel nanocomposite, epoxy resin reinforced with octadecylamine functionalized graphene oxide (GO-ODA) and Sasobit, prepared via creative vacuum shock technique, were investigated. By introducing 1, 3 and 5 wt% Sasobit to the neat epoxy resin, the tensile strength increased remarkably by 104%, 315% and 266%, respectively due to the unique stiff and crystalline structure of Sasobit. In addition, considerable enhancement of 125% in Young's modulus, 351% in toughness, 562% in impact resistance, ~19 °C in thermal stability and ~7 °C in glass transition temperature of epoxy resin with 3 wt% Sasobit loading was demonstrated. The composite containing 3 wt% Sasobit alone, were found to have even superior properties than GO-ODA/epoxy nanocomposite, as surprisingly 3, 2.9, 2.2 and 2 times more improvement, respectively in tensile strength, toughness, impact strength and thermal stability of epoxy resin compared to reinforcement with GO-ODA were obtained.     

Replication and surface properties of micro injection molded PLA/MWCNT nanocomposites

Multi-walled carbon nanotube (MWCNT) reinforced polylactide (PLA) nanocomposites were injected molded into a mold with micro needle patterns. In order to alleviate the hesitation effect caused by an increased melt viscositgy of PLA/CNT nanocomposites, the effects of the injection speed and holding pressure on the replication property were investigated. The effects of MWCNTs on the crystallization, thermal behavior, replication properties, replication and surface properties of micro injection molded PLA/CNT nanocomposites were investigated. An analysis of crystallinity and thermal behavior indicated that the MWCNTs promoted the unique α’ to α crystal transition of PLA, leading to an enhancement of surface modulus and hardness, as measured using a nanoindentation technique. The specific interaction between PLA and MWCNTs was characterized using an equilibrium melting point depression technique. Furthermore, the MWCNTs increased the activation energy for thermal degradation of PLA due to the physical barrier effect. The improved replication quality of the microfeatures in the PLA/MWCNT nanocomposites has been achieved by elevating injection speed and holding pressure, which enhances the polymer filling ability within the micro cavity. A replication ratio greater than 96% for the micro injection molded PLA/CNT nanocomposites were achieved at holding pressure of 100 MPa and injection speed of 120 mm/s. This study shows that processing conditions significantly influence the replication and surface properties of micro injection molded PLA/CNT nanocomposites.     

Development of an O-ring from NR/EPDM filled silica/CB hybrid filler for use in a solid oxide fuel cell testing system

This research presents the effects of oxygen pressure and ambient temperatures on the crack behavior of O-rings from a semi-EV of NR/EPDM rubber with silica/CB filler, exposed to the inlet flow and outflow oxygen pressure in a Solid Oxide Fuel Cell (SOFC) environment. Blends of NR/EPDM were prepared with various ratios of silica/CB filler at 00/60, 10/50, 20/40, 30/30, 40/20, 50/10, and 60/00 phr. The fabricated O-ring complied with the standard for O-rings (TIS 2728-2559), with a minimum hardness of 65–75 Shore A, minimum tensile strength of 9 MPa, minimum elongation at break of 200%, and a minimum 100% modulus of 2.7 MPa. The mechanical properties of the compounds were tested, and the appropriate compound was chosen to make the O-rings to test in SOFC. The crack morphology of the fabricated O-rings was investigated and compared with a commercial O-ring after testing in the SOFC. As a result, the compound with silica/CB of 40:20 ratio provided the optimum mechanical properties, and passed the criteria standard of TIS 2728-2559. The mechanical properties of the prepared and commercial O-rings were similar (P-value of commercial with 60/00 = 0.273, 50/10 = 0.273, 40/20 = 0.144, 30/30 = 0.465, 20/40 = 0.465, 10/50 = 1.000 and 00/60 = 0.273; all > 0.05) and and both could still be continued to be used in SOFC despite some inner cracks after 24 h. The price of the prepared O-ring is cheaper than the commercial O-rings due to the low price of NR used in its formulation. Therefore, a prepared O-ring can be used in a SOFC, or other applications due to their mechanical properties and their reasonable price.     

Nanocomposites induced by two-dimensional titanium carbide nanosheets for highly efficient energy storage

Surface group-rich titanium carbide nanosheets (TCNSs) were successfully fabricated by simply etching Ti₃AlC₂ powders and used as dielectric fillers to promote the dielectric and energy storage performances of poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-based composites. The PVDF-HFP/TCNS composites realize a high dielectric constant and low dielectric loss of 16.3 and 0.034 at 10² Hz, respectively. Importantly, a high energy storage density (U_e) of 0.367 J cm⁻³ at 900 kV cm⁻¹ and a high energy storage efficiency (η ≥ 78.9%) at a TCNS content of only 0.5 wt% are obtained, which indicates that incorporating TCNS is an efficient route in enhancing U_e while maintaining a high level η of the PVDF-HFP-based composites. According to detailed characterization results, a mechanism related to the reduction of lamellar crystals in the PVDF-HFP matrix is suggested. The above mechanism restricts the movement of polymer chains near the filler-matrix interface and is proposed to be responsible for the outstanding dielectric and energy storage performances. Consequently, this work provides a simple and effective method for fabricating highly efficient energy storage nanocomposites.     

Mechanistic details of metal-free cyclization reaction of organophosphorus oxide with alkynes mediated by 2,6-lutidine and Tf2O

Theoretical investigations have elucidated the mechanism of metal-free electrophilic phosphinative cyclization of alkynes reaction reported by Miura and coworkers. Two competitive mechanisms I and II were explored without or with 2,6-lutidine. Both of I and II involve transformation of P(V) to P(III), electrophilic addition, ring opening and cyclization/cyclization, hydrogen-transfer, and oxidation. The rate-determining step of mechanism I and competitive less-step II is electrophilic [2 + 1] cycloaddition and electrophilic addition via single C P bond formation with activation barrier of 13.5 and 10.6 kcal/mol, respectively. Our calculation results suggested that the cumulative effect of the isomer of 2,6-lutidine and Tf₂O as well as TfO⁻ affects the title reaction to some extent, and simultaneously activates key reaction sites and reverses the polarities of them via the formation of abundant noncovalent interactions to decrease activation barriers of TSs. In addition, the effects of two series substituents on reactivity of phosphine oxide were investigated. Therefore, our study will serve as useful guidance for more efficient metal-free synthesis of organophosphorus compounds mediated by pyridine reagents.     

氧化石墨烯调控钼酸铋在可见光下选择性光催化降解环境水中的抗生素

以氧化石墨烯(GO)作为增强光催化剂活性的调节剂, 采用一步水热法制备钼酸铋/氧化石墨烯(Bi₂MoO₆/GO)异质结光催化剂, 其可见光响应拓展至570 nm, 带隙能降至2.56 eV. 当m_Bi2MoO6/m_GO=100∶1时, Bi₂MoO₆/GO(100∶1)光催化剂在可见光的辐射下, 对水溶液中四环素和喹诺酮类抗生素选择性的高效催化降解去除能力为Bi₂MoO₆的2.1倍. Bi₂MoO₆/GO(100∶1)光催化剂活性的提高依赖于范德华力作用下的二维Bi₂MoO₆纳米片-二维GO纳米片界面的紧密接触. 有效的界面接触改善了光生电子的转移和光生载流子的分离. 自由基清除实验结果表明, ?OH起主要作用. 结合高效液相色谱-质谱(HPLC-MS)法对降解产物的分析, 提出了不同光催化剂催化降解恩诺沙星具有相似的降解途径和降解产物.     

ZnCl2、KOH和HNO3改性MWCNT对苯酚的吸附行为研究

通过扫描电子显微镜、X射线衍射仪、N₂吸附分析仪及Boehm滴定法获得ZnCl₂、KOH和HNO₃化学处理对高纯多壁碳纳米管的结构和表面含氧官能团的影响,通过批处理实验考察吸附条件（吸附时间、初始浓度、温度）对处理前后的碳纳米管吸附苯酚行为的影响,并采用准一级、准二级、Evolich动力学模型和热力学方程拟合其吸附数据,分析其动力学行为、热力学行为和吸附机理。结果表明,虽然ZnCl₂、KOH和HNO₃化学处理法均未对碳纳米管BET比表面积产生显著影响,但会影响其表面化学性质（即,对于ZnCl₂和KOH化学处理降低表面羧基、内酯基含量和增大碱性官能团量,而对于HNO₃化学处理可以增大表面羧基、内酯基含量,而碱性官能团略有增加）;改性处理影响碳纳米管去除苯酚效率：由于ZnCl₂和KOH改性处理降低碳纳米管表面羧基量,故其提高了苯酚去除率,而HNO₃处理则略减小碳纳米管的苯酚去除率,可能是由于碳纳米管结构和表面化学性质共同影响所致;碳纳米管的苯酚去除率均随苯酚溶液初始浓度的增大而减小;高温不利于吸附;热力学研究发现碳纳米管吸附苯酚过程是自发的和放热的,属于物理吸附;动力学研究表明,吸附过程符合准二级动力学方程。通过ZnCl₂和KOH化学处理,可以显著提高碳纳米管对苯酚的吸附性能。     

碳化终温对β-Mo2C催化喹啉加氢脱氮性能影响

以MoO_3为前驱物,CH_4/H_2为碳源,采用程序升温直接还原碳化法制备不同碳化终温(640、660、680、700和720℃)的碳化钼催化剂,通过XRD、N_2吸附-脱附、SEM、TEM、XPS和Raman表征研究碳化钼的物理性质和结构性质,并研究不同碳化终温碳化钼对喹啉加氢脱氮的催化性能。结果表明,不同碳化终温的碳化钼催化剂均为β-Mo_2C,碳化终温可显著改变碳化钼表面物种含量、平均孔径和介孔分布。碳化终温为680℃时,催化剂碳化程度较高,表面氧物种含量最低,表面C/Mo物质的量比最高,对应的催化活性也最佳,在340℃、4 MPa条件下,喹啉的转化率和脱氮率均高达99%以上,芳香族类化合物的选择性可达37.8%,显示出较低的芳环破坏性。表面组成尤其是表面氧对于β-Mo_2C上喹啉加氢脱氮反应途径的调控至关重要。     

Electrochemical codeposited polypyrrole–tungsten oxide composite materials with wide potential windows

The three-dimensional morphology has sufficient interface contact and can be in favor of the electronic transport process. In this work, the demand for high-performance electrodes such as energy storage devices has been designed. Polypyrrole and tungsten oxide composite materials (PPy-WO₃) have been synthesized by cyclic voltammetry (CV) technology at −0.6 to 0.9 V versus saturated calomel electrode (SCE) for 20 cycles. The PPy-WO₃^{20 mV/s}, PPy-WO₃^{60 mV/s}, and PPy-WO₃^{120 mV/s} electrodes have been prepared by CV technology at sweep rates of 20, 60, and 120 mV/s. The influences of scan rate on morphologies and charge storage properties of the composites are discussed. Among them, a three-dimensional flake structure for PPy-WO₃^{20 mV/s} with a size of up to several micrometers was synthesized. PPy-WO₃^{20 mV/s} composites as electrode materials exhibit a wide charge storage potential window of 1.4 V (between −0.9 and 0.5 V vs. SCE) and a specific capacitance of 145.13 F/g at 1 mA/cm². Moreover, the long-term stability of PPy-WO₃^{20 mV/s} and PPy has been investigated in 5 M LiCl aqueous electrolyte. The stability of the materials can be improved by inorganic and organic composites.