Comparison Study of Phenylquinoline-based Iridium(III) Complexes for Solution Processable Phosphorescent Organic Light-Emitting Diodes by PEDOT:PSS and Graphene Oxide as a Hole Transport Layer

Electroluminescent (EL) properties of Ir(III) complex, [(2,4-diphenylquinoli-ne)]₂Iridium picolinic acid N-oxide [(DPQ)₂Ir(pic-N-O)] were investigated using PEDOT:PSS and reduced graphene oxide (rGO) as a hole transport layer for solution processable phosphorescent organic light-emitting diodes (PhOLEDs). High performance solution-processable PhOLED with PEDOT:PSS and (DPQ)₂Ir(pic-N-O) (8 wt%) doped CBP:TPD:PBD (8:56:12) host emission layer were fabricated to give a high luminance efficiency (LE) of 26.9 cd/A, equivelent to an external quantum efficiency (EQE) of 14.2%. The corresponding PhOLED with rGO as a hole transport layer exhibited the maximum brightness and LE of 13540 cd/m² and 16.8 cd/A, respectively. The utilization of the solution processable rGO thin films as the hole transport layer offered the great potential to the fabrication of solution processable PhOLEDs.     

A Molecular Placeholder Strategy To Access a Family of Transition‐Metal‐Functionalized Vanadium Oxide Clusters

Systematic access to metal‐functionalized polyoxometalates has thus far been limited to lacunary tungsten oxide and molybdenum oxide clusters. The first controlled, stepwise bottom‐up assembly route to metal‐functionalized molecular vanadium oxides is now presented. A di‐vacant vanadate cluster with two metal binding sites, (DMA)₂[V₁₂O₃₂Cl]^3? (DMA=dimethylammonium) is formed spontaneously in solution and characterized by single‐crystal X‐ray diffraction, ESI mass spectrometry, ⁵¹V NMR spectroscopy, and elemental analyses. In the cluster, the metal binding sites are selectively blocked by hydrogen‐bonded DMA placeholder cations. Reaction of the cluster with transition metals TM (Fe³⁺, Co²⁺, Cu²⁺, Zn²⁺) gives access to mono‐functionalized vanadate clusters (DMA)[{TM(L)}V₁₂O₃₂Cl]^n? (L=ligand). Metal binding is accomplished by significant distortions of the vanadium oxide framework reminiscent of a pincer movement. Cluster stability under technologically relevant conditions in the solid‐state and solution is demonstrated.     

Modulating Aβ33–42 Peptide Assembly by Graphene Oxide

Graphene oxide (GO) is utilized as the modulator to tune the formation and development of amyloid fibrils (Aβ_33–42). Atomic force microscopy temporal evolution measurements reveal that the initial binding between the peptide monomer and the large available surface of the GO sheets can redirect the assembly pathway of amyloid beta. The results support the possibility to develop graphene‐based materials to inhibit amyloidosis.     

A Study on the Growth of Cr2O3 in Ordered Mesoporous Silica and Its Replication

A systematic study on the growth of Cr₂O₃ in three‐dimensional cubic ordered mesoporous silica (KIT‐6) and its replication through nanocasting is reported. By changing the loading time and amount of precursor, the size and shape of the obtained replica could be controlled to some extent. More interestingly, in contrast to previously published studies, when KIT‐6 with an aging temperature of 100 °C, which has a high degree of interconnectivity, was used as a hard template, a cubic ordered mesoporous Cr₂O₃ replica with an open uncoupled subframework structure and reduced symmetry was obtained. Formation of a replica with different symmetry and uncoupled subframework structure is not only related to the degree of interconnectivity of the parent, but also strongly depends on the type of metal oxide and its growth mechanism in the silica template. Nanocasting of Cr₂O₃ with a low loading results in a replica with monomodal pore size distribution that has same symmetry as the hard template, whereas increasing the loading amount alters the symmetry of the replica and yields a replica with bimodal distribution.     

Rationally Investigating the Influence of T1 Location on Electroluminescence Performance of Aryl Amine Modified Phosphine Oxide Materials

The correspondence between triplet location effect and host‐localized triplet–triplet annihilation and triplet–polaron quenching effects was performed on the basis of a series of naphthyldiphenylamine (DPNA)‐modified phosphine oxide hosts. The number and ratio of DPNA and diphenylphosphine oxide was adjusted to afford symmetrical and unsymmetrical molecular structures and different electronic environments. As designed, the first triplet (T₁) states were successfully localized on the specific DPNA chromophores. Owing to the meso‐ and multi‐insulating linkages, identical optical properties and comparable electrical performance was observed, including the same first singlet (S₁) and T₁ energy levels to support the similar singlet and triplet energy transfer and the close frontier molecular orbital energy levels. This established the basis of rational investigation on T₁ location effect without interference from other optoelectronic factors.     

An Unusual Triphenylphosphine Oxide Catalyzed Stereoselective 1,3‐Dichlorination of Unsaturated Ketoesters

An unusual Ph₃PO‐catalyzed stereoselective 1,3‐dicholorination of an unsaturated ketoester has been developed. The novel activation mode involved in this cascade reaction can promote consecutively elusive transformations. The products were obtained with good yields and excellent stereoselectivities. This reaction makes important complementation to the limitations associated with the field of dichlorination.     

Highly Enantioselective Catalytic System for Asymmetric Copolymerization of Carbon Dioxide and Cyclohexene Oxide

A new ligand can be easily prepared, and its intramolecular dinuclear zinc complexes act as a high performance catalyst for the asymmetric alternating copolymerization of cyclohexene oxide and CO₂ under very mild conditions (1 atm CO₂, room temperature), affording completely alternating polycarbonates with up to 93.8 % enantiomeric excess (ee) and 98 % yield. A high M_n value of 28 600 and a relatively narrow polydispersity (M_w/M_n ratio) of 1.43 were also achieved.     

单壁碳纳米管上毒性苯气体净化的分子模拟(英文)

采用巨正则系综蒙特卡罗(GCMC)方法研究了空气中微量苯组分在单臂碳纳米管(SWNTs)上的吸附净化.模拟表明,具有较大孔径的(20,20)纳米管比较适合吸附纯苯蒸汽,而对于移除空气中的毒性苯物质,苯的吸附选择性分别在(12,12)纳米管及4.0 MPa时和(18,18)纳米管及0.1 MPa时出现最小值和最大值.为了解释这一异常行为,我们进一步分析了N2-O2-C6H6混合物的局部密度分布、吸附分子构型和概率密度分布,发现(18,18)纳米管内外完全被苯分子占据,而对于(12,12)纳米管,由于存在更强的吸附质-吸附剂相互作用,空气分子更倾向于吸附在管与管之间的间隙.此外,吸附分子的空间有序参数表明大多数苯分子采取"平躺"在纳米管表面的定位,而线性的N2和O2分子则多数平行于孔轴方向.最后研究了温度和苯分子主体相浓度对分离效果的影响.我们发现较大孔中的选择性随着温度的增加比小孔下降更加明显.与此对比,主体相苯浓度对小孔中的选择性起到更加重要的作用.     

氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯(PANI-GO),得到了氮掺杂的还原氧化石墨烯碳材料(N-RGO),以其负载Pt制备了Pt/N-RGO纳米结构电催化剂.采用透射电镜(TEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能.结果表明:高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

新型复合共沉淀法制备高能量/高功率型锂离子二次电池用5V正极材料LiNi_(0.5)Mn_(1.5)O_4及其电化学性能

在传统的固相法的基础上开发了新型复合共沉淀法制备LiNi0.5Mn1.5O4材料.新型复合共沉淀法采用(NH4)2CO3和(NH4)2C2O4共同作为沉淀剂,通过控制共沉淀反应条件,得到了具有均匀球形形貌的沉淀物颗粒.再通过与饱和氢氧化锂溶液的水热反应及高温反应,最终制备出具有球形次级形貌和纯相尖晶石结构的LiNi0.5Mn1.5O4材料.电化学测试表明,制备的LiNi0.5Mn1.5O4具有优异的电化学性能,其初始容量达到了141.4mAh·g-1.在0.3C、1C和3C倍率下经过200次循环后的容量分别为136.0 mAh·g-1(96.3%)、128.6 mAh·g-1(94.4%)和113.9 mAh·g-1(91.1%).通过高温反应及特殊的冷却处理,LiNi0.5Mn1.5O4在4.0 V低压区平台的容量损失得到了有效抑制.更重要的是,通过控制合成过程中的关键步骤,可实现半定量化控制材料结构中的原子有序排布程度,进而得到具有高能量密度和高功率密度的两种LiNi0.5Mn1.5O4材料,其能量密度和功率密度分别达到了648.6 mWh·g-1和7000 mW·g-1以上.