SO_4~(2-)/M_xO_y型固体超强酸在有机合成中的应用

SO2 -4 /MxOy(M =Ti,Zr,Fe)是一新型的固体超强酸催化剂 .综述了近年来SO2 -4 /MxOy 型催化剂在有机合成中的应用 ,并对其今后的发展趋势作了预测 .     

多乙苯脱氢制多乙烯苯氧化铁催化剂的研究助剂钾,铈对催化性能的影响

研制了适合多乙苯脱氢制多乙烯苯的Ｆｅ－Ｋ－Ｃｅ复合型脱氢催化剂．助剂钾以钾霞石（ＫＡｌＳｉＯ４）方式引入，既克服了钾的大量流失，又保留了钾碱的抗积炭性能，使催化剂活性稳定．另一助剂ＣｅＯ２的加入对催化剂中的各组分起到了一定的分散作用，使催化剂晶粒度变小，并且提高了活性组分Ｆｅ２Ｏ３的还原温度，因而可增强催化剂的抗还原能力．     

二组分混合物的最小流化特性 Ⅰ.混合/分离状态与最小流化空隙率

分析了二组分混合物的３种混合／分离状态及在完全混合时发生连续相转变的极限组成。提出一个判别非等密度体系混合／分离状态的法则与确定混合物空隙率简易可行的随意松散堆积方法。     

Synthesis and Crystal Structure of a Novel Three-dimensional Cu(II) Compound {[Cu(2,2''-bipy)(C7H4O5S)(H2O)2]·(H2O}n

The title compound, {[Cu(2,2'-bipy)(C7H4O5S)(H2O)2](H2O}n (2,2'-bipy = 2,2'- bipyridine), was synthesized by the hydrothermal reaction of Cu(NO3)2(3H2O, 2,2'-bipyridine and 2-sulphobenzoic acid, and structurally characterized by single-crystal X-ray diffraction analysis. The crystal is of triclinic, space group P with a = 9.21(3), b = 10.17(3), c = 10.77(3) (A), α = 77.017(16), β = 89.80(8), γ = 68.46(7)°, V = 911(5) (A)3, Z = 2, (D/s)max = 0.001, Mr = 473.94, Dc = 1.728 g/cm3, μ(MoKα) = 1.365 mm-1, F(000) = 486, the final R = 0.0246 and wR = 0.0628 for 3809 observed reflections with I > 2σ(I). The mononuclear crystal structure extends into a two-dimensional net- work via hydrogen-bonding interactions and a three-dimensional framework is further formed by means of π-π stacking interactions.     

Pd_2(dba)_3/BINAP催化合成1,4-双-(4′-苯胺基苯酰基)苯

以Pd2(dba)3/BINAP催化1,4-双-(4′-溴苯酰基)苯和苯胺反应,合成了1,4-双-(4′-苯胺基苯酰基)苯,其结构经UV,1HNMR,13CNMR和元素分析表征。     

LiCoO_2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO2 electrode in 1 mol/L LiPF6-EC:DMC:DEC elec- trolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO2 electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO2 electrode in Li/LiCoO2 cells is attributed to the formation of a Li1-xCoO2/LiCoO2 concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO2 hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

MCM-41-supported bidentate phosphine palladium(0) complex: a highly active and recyclable catalyst for the Sonogashira reaction of aryl iodides

The first MCM-41-supported bidentate phosphine palladium(0) complex has been prepared. This complex is a highly efficient catalyst for Sonogashira reaction and can be reused at least 10 times without any decrease in activity.     

Preparation of Layer Structure-Controlled Ru-Sn-Al2O3 Catalysts and Their Reactivity

In order to achieve functional group selective hydrogenation, the layer structure of Ru-Sn-Al2O3 catalysts was controlled by using sol-gel, powder impregnation and combined sol-gel impregnation methods. The properties of the catalysts and effectiveness in hydrogenation of dimethyl terephthalate were examined. The surface Sn contents of the catalysts characterized by X-ray photoelectron spectroscopy depended on the preparation method, in spite of almost the same bulk Ru and Sn compositions measured by X-ray fluorescence analyses. TPR and CO adsorption of the catalysts also depended on the preparation method. With regard to the conversion rate of dimethyl terephthalate and the rate of product conversion from methyl 4-hydroxy methylbenzoate to p-xylene via methyl p-toluate, Ru impregnation catalysts had higher rates than the other catalysts.     

Investigations of precipitates in heat treated AgPd30/CuSn6 layers

The subject of the investigations are precipitation zones, which grew as a result of chemical diffusion in AgPd30/CuSn6 bimetals. These precipitation zones have been characterized by metallography, electron probe microanalysis and x-ray diffraction. The growth of precipitation zones in the plating layer and in the substrate layer in dependence on time have been determined. The use of x-ray diffraction alone for the identification of the precipitates could not supply satisfying results in every case. This problem was solved by the application of electron probe microanalysis using a correction method, which allows the estimation of the chemical composition of small particles.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday