Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.     

Study of non-isothermal crystallization of amorphous Cu<Subscript>50</Subscript>Ti<Subscript>50</Subscript> alloy

The crystallization kinetics of amorphous Cu₅₀Ti₅₀ has been studied using differential scanning calorimetry (DSC) under non-isothermal conditions. The curves at different linear heating rates (2, 4, 8 and 16 K min^–1) show sharp crystallization peaks. The crystallization peak shifts to higher temperatures with increasing heating rate. The Kissingers method of analysis of the shift in the transformation peak is applied to evaluate the activation energy (E _c). The KJMA formalism, which is basically developed for isothermal experiments, is also used to obtain E _c and the Avrami parameter (n).The DSC data have been analysed in terms of kinetic parameters, viz. activation energy (E _c), Avrami exponent (n) and frequency factor K ₀ using three different theoretical models. It is observed that the activation energy values derived from KJMA approach and modified Kissinger equation agree fairly well with each other. The activation energy values obtained from normal Kissinger method, and Gao and Wang expression underestimate the activation energy.The financial support provided by All India Council for Technical Education (AICTE), New Delhi (Govt. of India) is gratefully acknowledged.     

Spectrophotometry Determination of Cobalt after Extraction of its Ternary Complex with 3-(4-Phenyl-2-Pyridyl)-5,6-Diphenyl-1,2,4-Triazine and Tetraphenylborate into Molten Naphthalene

The reaction of 3-(4-phenyl-2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PPDT) and tetraphenylborate (TPB) with cobalt (II) has been studied to determine the optimum conditions for the extraction and quantitative spectrophotometry determination of this metal. The ternary complex is extracted into molten naphthalene at pH 3.6–7.4. The solid naphthalene containing the cobalt associated complex is separated by filtration and dissolved in acetonitrile. Beer's law is obeyed in the concentration range 8–140 μg cobalt in 10 ml of acetonitrile solution. The molar absorptivity and sensitivity are 4.2×10³ l·mol^?1·cm^?1 and 0.01408 μg/cm², respectively. The other factors such as pH, amounts of reagents and naphthalene, shaking and standing times, and the effect of diverse ions are studied. The method has been applied to the determination of cobalt in iron steel alloys.     

Static atomic displacements of Sn in disordered NiAs/Ni2In type HT-Ni1+δSn

The crystal structures of the intermediate solid solution HT (high temperature) Ni_1+δSn with δ=0.28, 0.52 and 0.61 (refined Ni contents) have been analyzed in detail by X-ray diffraction on single crystals. The previously reported basic atomic arrangement, i.e., a NiAs/Ni₂In structure type (P6₃/mmc, Ni(1) on 2a, 0 0 0, Ni(2) with an occupancy δ on 2d, and Sn on 2c, ), is confirmed. However, strong anisotropic atomic displacements occur for Sn within the a-b plane of the hexagonal unit cell, which require a Gram-Charlier expansion of the probability density function of Sn in order to obtain a good fit to the diffraction data. Direction, magnitude and the concentration dependence of the displacements can be interpreted in terms of the geometrical requirements of the different local atomic configurations in the planes z=±1/4, so that the displacements can be identified as static ones.     

Electroreduction of α-glucose on CNT/graphite electrode modified by Zn and Zn–Fe alloy

Electroreduction of -glucose to form sorbitol on Zn/CNTs and Zn alloy/CNTs electrodes has been investigated in this paper. Carbon nanotubes (CNTs) used in this paper are grown directly on graphite disks by chemical vapor deposition. Zn and Zn alloy are electrodeposited on the activated CNTs/graphite electrode by pulse galvanostatic method. The micrographs of Zn/CNTs and Zn alloy/CNTs electrodes are characterized by scanning electron microscopy. The results show that the current efficiency of -glucose reduction on CNTs electrodes is much better than that on flat Zn electrodes. The order of the current efficiency on different electrodes is as follows: Zn/CNT (0.58) Zn–Fe/CNT (0.57)>Zn–Ni/CNT (0.43) Zn/graphite (0.42)>Zn (0.40). It indicates that CNTs have good potential application in electrosynthesis. Additionally, effects of some operating parameters, such as pH, temperature and -glucose concentration, on the current efficiency of -glucose reduction are also discussed.     

CH bond activation in the presence or absence of oxygen or nitrous oxide

The reaction of C₂H₆with lattice oxygen, O^2- (in the absence of gaseous oxygen), or “adsorbedℍ oxygen (in the presence of gaseous oxygen) over NiMoO₄ catalysts has been performed and compared to C₃H₈ activation. The results obtained indicate that adsorbed oxygen exhibits a higher reactivity to C₂H₆, while lattice oxygen is more reactive relative to C₃H₈. Kinetic studies of these two reactions in presence of molecular oxygen have indeed shown that the ethane oxidative dehydrogenation (ODH) is dependent on the oxygen partial pressure, whilst on the contrary propane ODH is not. In order to confirm the presence of “adsorbed” oxygen for ethane activation, ODH tests have been performed with N₂O. On increasing temperature, the O^- adsorbed species enhances the mild oxidation of ethane. The activation energy of ethane consumption E_C2H6, relative to propane (E_C3H8 = 133 kJ/mol) is 145 kJ/mol. A possible mechanism is proposed for the oxidative dehydrogenation of ethane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.     

纤维素基磁性聚偕胺肟树脂的研究——循环吸溴中吸附与还原能力的变化

研究了酸式纤维素基磁性聚偕胺肟树脂（ＡＭＡＯ）在循环吸溴过程中吸附容量和还原能力的变化，发现原树脂的吸溴初速和溴的还原率比再生树脂高一倍以上，但第一次和第二次再生树脂的吸附速度和还原效率几乎相同，暗示着树脂吸溴后基本结构已发生了彻底的变化．树脂在循环使用时吸溴容量变化不大而溴的还原量却显著降低，表明ＡＭＡＯ作为吸溴剂有较高的实用价值．     

铑（Ⅲ）与2—（3,5—二氯—2—吡啶偶氮）—5—二甲氨基苯胺络合物的催化氢波

本文提出一种新的测定铑的催化氢波体系.先使Rh(Ⅲ)与3,5-diCl-PADMA在HAc-NaAc缓冲溶液中生成稳定的络合物,再以适量HclO_4将溶液酸化后进行极谱测定。利用正交试验法确定体系的最佳分析条件为:0.05 mol/L pH5.0的HAc-NaAc,1.6×10~(-5)mol/L3,5-diCl-PADMA,沸水浴加热15min.,4.4 mol/L HCIO4酸化。在此条件下的线性范围为1.9×10~(-11)～3.9×10~(-9)mol/L,检出限达5.8×10~(-12)mol/L。大量Cu(Ⅱ)、Ni(Ⅱ)、Fe(Ⅲ)及Co(Ⅱ)对体系的干扰可用EDTA消除。研究了催化波的性质,表明该波为Rh(Ⅲ)与3,5-diClPADMA络合物的催化氢波。