三氯化钛存在下碘酸钾滴定法测定锡

提出了采用铝加铁混合还原剂还原,三氯化钛存在下碘酸钾滴定法测定锡的绝对测量方法,研究了三氯化钛抑制氧的作用效果及作用机理。应用于巴氏合金中锡含量的测定,方法简便、快速,结果准确可靠。     

Review of Directly Producing Light olefins via CO Hydrogenation

Directly making light olefins via CO hydrogenation is a promising process to obtain a nonpetroleum based supply of alkenes.Limited by the ASF distribution function of Fischer-Tropsch synthesis,the yield of light olefins (C2-C4) can not reach the desired levels,which is a great challenge to overcome.Beginning thermodynamic analysis,the ASF distribution function,the reaction performance of CO hydrogenation and slurry reactor studies.The problems currently faced by this research area are presented at the end of the article.     

A calorimetric study of phase evolution in a WE43 Mg alloy

A DSC investigation has been performed on a Mg–RE–Y–Zr (RE=rare earth) technical alloy WE43. Hardness trend during isothermal treatments has been correlated to the calorimetric traces evolution and to the forming β phases with its precursors. Oversaturation of solute elements occurs at temperatures higher than 150±C, on cooling at room temperature after the anneals. Activation energies, found under non-isothermal conditions on artificially aged samples, suggest a slow transformation velocity, while the hardness response is relatively fast.     

Influence of surface treatments in the initial stages of anodizing Al–Ag alloys in neutral electrolytes

Using voltage-time responses and cyclic voltammetry, the initial stages of anodizing of Al–2.1 at.% Ag and Al–4 at.% Ag alloys are shown to depend upon the heat treatment of the alloys and the pre-treatment of the alloy surfaces. Chemical polishing of solution-treated alloys leads to relatively uniform anodic oxidation on a relatively smooth alloy surface, in the absence of significant effects of coarse, silver-rich intermetallics. In contrast, losses of current to oxygen generation arise for the roughened alloy surface from mechanical polishing. With ageing, secondary reactions at the relatively silver-rich intermetallics are more prevalent, although the effects on the voltage-time response depend upon the balance between processes occurring on the matrix and intermetallic regions, including film growth, oxygen generation within the anodic film, film damage due to release of oxygen, dissolution of silver species and re-growth of damaged film.     

铜基催化剂的结构、物性及其对混合碳四选择加氢反应的催化性能

 用XRD，XPS，SEM和H2－TPR等手段研究了铜基负载型催化剂的结\r\n构和物性及其对混合碳四加氢脱炔的催化性能．结果表明，在负载铜催\r\n化剂中加入一定量的Co可提高催化剂的加氢脱炔活性，而Co含量较少时\r\n加入少量的Ce也能提高催化剂的活性和选择性．Cu和Co之间存在着相互\r\n协同作用，使得活性组分在催化剂表面偏析，CuO在催化剂表面呈非晶\r\n相分散状态，催化剂颗粒粒径变小，催化剂更容易被还原，从而改善了\r\n催化剂的催化性能．     

A New Family of Binary Layered Compounds of Platinum with Alkali Metals (A = K,Rb, Cs)

By reacting platinum with alkali metals (A = K, Rb, Cs) a new family of binary alkali metal platinides has been synthesized and characterized by chemical analysis, X‐ray powder diffraction, thermal analysis (DTA and DSC), and magnetic measurements. All three compounds exhibit similar XRD‐patterns with strong reflections that can be indexed on the basis of a rhombohedral crystal system (K_xPt: a = 2.6462(1), c = 17.123(1); Rb_xPt: a = 2.6415(1) Å, c = 17.871(1) Å; Cs_xPt: a = 2.6505(1) Å, c = 18.536(1) Å; x < ½. The a lattice constant is independent on the alkali metal used and of value close to the Pt–Pt distance in NaPt₂ (2.645Å). The c parameter increases monotonically with the growing atomic radius of the alkali metal. The average structure of the alloys consists of cubic close packed layers of platinum atoms with layers of disordered alkali metals in between. For all compounds besides the strong reflections small satellites are observed which cannot be indexed together with the rhombohedral peaks in any rational 3‐dimensional lattice. However, these satellites can be indexed as incommensurate modulations within the ab plane (found propagation vectors k = (0.1011, 0.2506, 0) for Cs_xPt, and k = (0.0168, 0.2785, 0) for Rb_xPt).     

块状LaNi5基纳米合金的正电子湮灭研究

利用高温高压技术，在不同的压力和温度(-4．5GPa，-800℃)下将LaNi5基快淬合金粉直接压制成了块状纳米晶合金。X射线衍射分析表明，高压使其晶粒内部发生了明显的压致晶粒碎化，其平均晶粒尺寸在4．5GPa下从75．5nm降至24．6nm。利用正电子湮灭技术研究了这种晶粒碎化效应对纳米合金内部缺陷结构的影响。测试结果表明，在高温高压的作用下，由于界面上原子的迁移和弛豫加剧，导致晶界上尺寸较大的微孔隙缺陷逐渐转化为尺寸较小的自由体积缺陷，使得纳米合金的致密度逐渐增强，显微硬度逐渐升高，从而在高温高压下得到致密的块状纳米合金材料。     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

Ti-47Al-1.2Ce合金显微组织及稀土相

ＴｉＡ1金属间化合物以其低密度 ,高比强度和比弹性模量 ,良好的抗蠕变及抗氧化能力等特点 ,已成为航天、航空、能源及汽车工业极具竞争力的高温结构材料。虽然ＴｉＡｌ基合金有众多优点 ,但仍存在室温塑性较低、成形性差、性能不平衡等问题 ,还需要深入研究ＴｉＡｌ基合金的合金化及制备工艺等方面技术 ,以此来控制并改善合金的显微组织 ,提高ＴｉＡｌ基合金的综合性能[1～ 4 ] 。合金化是改善ＴｉＡｌ基合金显微组织和性能的重要途径之一 ,通常添加的合金元素有Ｖ ,Ｃｒ ,Ｎｂ ,Ｗ ,Ｍｏ ,Ｓｉ ,Ｂ等[5～ 7] 。稀土元素一般被用来细化材料…     

钇对金属陶瓷力学性能和组织的影响

研究了添加钇对Ｔｉ（Ｃ，Ｎ）基金属瓷力学性能和组织的影响。结果表明，加入适量的钇能提高Ｔｉ（Ｃ，Ｎ）基金属陶瓷的抗变强度和硬度，其原因是由于钇与杂质硫起反应在化合物，净化了陶瓷相－金属相，陶瓷相－陶瓷相界面提高子界面结合强度