Hydrothermal Synthesis, Crystal Structure, and Characterization of a Novel Terbium（Ⅲ） Coordination Polymer Bridged by 5-Sulfoisophthalate Trivalent Anions

Introduction Recently, several efforts have been made for thestudy of coordination polymers assembled from lantha-nide ions and aromatic polycarboxylate ligands becauseof their intriguing structural diversity and potentialapplications in several fields, s…     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

Pb2＋在液/液界面迁移的电化学研究及其应用

用循环伏安法研究了双硫腙络合推动Pb^2＋在水/乙酰丙酮界面迁移的伏安过程. 实验证明, 该过程是受扩散控制的不可逆过程, Pb^2＋由水相转移到有机相中, 与双硫腙形成络合物Pb(DzH)₂. Pb^2＋的峰电位在－0.3 V处, 并且在5× 10^－6～0.1 mol•L^－1范围内与峰电流成正比. 这一方法为工业废水中铅的在线、现场测定提供了可靠、灵敏的检测方法.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

MTT法测定稀土离子对BEL-7402及K562细胞的毒性及增殖毒性

用MTT法测定稀土离子在不同浓度、不同培养液中,与BEL 7402和K562细胞作用不同时间,对细胞的毒性和增殖毒性。结果表明,在含10%小牛血清培养液中,仅个别稀土离子在较高浓度时对BEL 7402细胞增殖有较弱的抑制作用;对于K562细胞,稀土离子在低浓度时对细胞增殖即表现出较强的抑制作用(P<0.05)。当培养液不含小牛血清时,较低浓度的稀土离子即可抑制BEL 7402细胞的增殖(P<0 05)。     

First‐principles study of metal/nitride polar interfaces: Ti/TiN

We have examined the optimal interface structure, ideal work of adhesion and bonding character of polar Ti(110)/TiN(111) interfaces by first‐principles density‐functional plane‐wave pseudopotential calculations. Both Ti‐ and N‐terminated interfaces, including six different interface structures, were calculated. The interface structure for each termination, continuing the TiN crystal structure across the interface, has the largest work of adhesion. Although both terminations yield substantial adhesion energies in the range 3–7 J m^?2, the N‐terminated interface is ～4 J m^?2 stronger than the Ti‐terminated interface. Analysis of the interfacial electronic structure shows that the Ti‐terminated interface is a mixed strong, metallic and weak covalent character, whereas the N‐terminated interface is a polar covalent bond similar to the Ti/TiC interface. Further study of the separation of the optimal interface shows that the cleavages will never fracture at the interface due to the strong bonding, which is consistent with the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.     

交替三线性分解算法与反相高效液相-二极管阵列检测方法相结合同时测定苯二酚的位置异构体

 利用交替三线性分解算法与反相高效液相 二极管阵列检测 (RP HPLC DAD)相结合 ,在洗脱时间为1 0 86min～ 1 399min(间隔 1 / 1 50min)、紫外吸收波长为 2 68nm～ 2 98nm(间隔 1nm)时对苯二酚位置异构体的重叠及光谱体系进行了分辨研究。分辨结果与实际结果一致。同时测定了水溶液中共存的邻苯二酚、间苯二酚和对苯二酚的含量 ,回收率分别为 (1 0 0 1± 1 0 ) % ,(99 4± 1 4) % ,(1 0 0 5± 1 7) %。研究结果表明 :该方法定量快速准确 ,实验操作步骤简单 ,解决了在干扰物存在条件下三者很难同时分辨的问题。     

On the Synthesis of 2-Acetyl-4-aryl-6H-1,3,4-thiadiazin-5-ones by Reaction of Nitrilimines with α-Mercapto Alkanoic Acids

Summary.  N′-Arylacetonitrilimines were generated from acetohydrazonyl chlorides and reacted with mercaptoalkanoic acids forming 4-aryl-5-oxo-3-thiahexanoic acids. These were cyclized by reaction with dicyclohexyl carbodiimide yielding 2-acetyl-4-aryl-6H-1,3,4-thiadiazin-5-ones. Received November 13, 2001. Accepted January 9, 2002     

硫酸介质中Ti／SnO2／PbO2析氧阳极的研究

由于硫酸溶液具有高的电导、一般条件下性质稳定、价格相对低廉等优点，所以电化学合成大多在硫酸溶液中进行．阳极析氧是电化学合成不可避免的阳极过程．但因硫酸的强腐蚀性，以及从阳极析出的氧的强氧化性，使得能满足工业生产的阳极材料很缺乏．自１９５０年荷兰Ｈｅｎ...     

Steam Reforming Reactions of Methanol Over Nickel and Copper Catalysts

Steam-reforming reactions of methanol over NiO/Al₂O₃ and CuO/ZnO have been investigated. Over the nickel catalyst, the reaction rate is of zero kinetic order with respect to either methanol or steam, and the activation energy is 12.4 kJmol^?1, whereas with copper catalyst, the rate is expressed according to the literature as kP_a/(1 + K_aP_a + K_b+P_b) in which “a” and “b” are methanol and steam, respectively. The rate-controlling step of the reaction is assigned to the dissociation of O-H bond with dehydrogenation of C-H bond proceed rapidly to form carbon oxides. With copper catalyst the intrinsic participation of a water molecule during the dehydrogenation of C-H bond leads to the formation of carbon dioxide. With nickel catalyst, the dehydrogenation proceed more rapidly than the migration of a water molecule from an alumina site to a nickel site and causes almost exclusively the formation of carbon monoxide and hydrogen at a lower reaction temperature.