Characteristic of a broadband Ti:LiNbO3 optical modulator with buried electrodes and etched grooves in the buffer layer

Traveling wave Ti:LiNbO₃ Mach-Zehnder optical modulators with buried electrodes and etched grooves in the SiO₂ buffer layer are analyzed by the finite element method. The tradeoff between the bandwidth BW and the half-wave voltage Vπ is discussed. The value of BW/Vπ is used to weight the total performance of the modulator. Taking a thick buffer layer and etching deep grooves in the buffer layer are demonstrated as two effective methods to improve the performance of the modulator. A 3-dB optical bandwidth of 18 GHz with half-wave voltage 5V at a wavelength of 1.55 pm could be obtained even though the electrode is not very thick. When the requirement of half-wave voltage is not very critical, a bandwidth of more than 100 GHz can be obtained.     

Hybrid organosilazane/organosilylamine telechelic oligomers—I. Two-dimensional NMR spectroscopy characterization of dimethylsilylethylenediamine oligomers

The detailed characterization of multifunctional hybrid organosilazane/organosilylamine telechelic oligomers by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy in one and two dimenions has been undertaken. The specific multifunctional oligomers, comprising NH/NH₂ or SiCl functionalities depending on the monomer feed-ratio, were prepared from mono- and di-functionally reacted dichlorodimethylsilane (DDS) and mono-, di-, tri- and tetra-functionally reacted ethylenediamine (EDA). Varying the feed-ratio afforded control of the microstructures of the oligomers and the preparation of oligomers with, in some cases, conterminously located silicon–chlorine (SiCl) groups. The combination of the NMR methods with the IR technique has enabled the detailed microstructural characterization of the oligomers and the identification of the functionalities therein. This approach and the knowledge gained from the DDS/EDA system has been applied to the microstructural characterization of other hybrid organosilazane/silylamine preceramic telechelic oligomers.     

五羟色胺分子选择性电极研究

本应用自己合成的联萘２０－冠－６作为活性载体，进行了五羟色胺分子选择性电极研究。电极在１０＾－＾５－１０＾－＾２ｍｏｌ／Ｌ浓度范围内对五羟色胺具有稳定的线性响应，平均斜率为６３ｍＶ／ＰＣ，检测下限为２．７×１０＾－＾６ｍｏｌ／Ｌ。     

Neue Spiroverbindungen aus Cyclophosphazenen und Cyclodi[phosphadiazan]en

New Spiro Compounds from Cyclophosphazenes and Cyclodi[phosphadiazanes] Chlorocyclophosphazenes (Cl₂P = N)₃ and (Cl₂p = N)₄ react with dihydrazidophosphoric acid derivatives in THF in the presence of triethylamine to give the spirocyclic compounds Cl₄N₃P₃(NHN(CH₃))₂P(S)OC₆H₅, Cl₆N₄P₄(NHNH)₂P(S)OC₆H₅. Constitutions have been confirmed by MS, NMR, IR and elemental analysis.     

On the phase space approach to complexity

We elaborate in some detail on a new phase space approach to complexity, due to Y.-C. Zhang. We show in particular that the connection between maximal complexity and power law noise or correlations can be derived from a simple variational principle. For a 1D signal we find 1/f noise, in accordance with Zhang.     

A facile synthesis of per (poly )fluoroalkyl substituted α-amino acid derivatives

Initiated by CrCl3/Fe redox couple, per(poly)fluoroalkyl iodides added to methyl a-acetylamino acrylate, giving B-per(poly)fluoroalkyl a-amino acid derivatives in good yields.     

串联系统可靠性虚拟系统法置信下限的小样本性质

本文讨论了具有r个成败型元件串联系统可靠性的置信下限问题。研究了虚拟系统法置信下限的小样本性质,证明了,在通常情况下虚拟系统法置信下限要大于常见的L-M法置信下限.更一般地,本文证明了在成败型试验中,当成功数与试验数之比保持不变时,试验次数的增加将直接缩小成功率置信区间的长度。     

停流—荧光动力学分析法测定痕量钛的研究

利用自行组装的停流-荧光动力学分析仪,采用停流法汇合流体动力注入技术,研究了钛与3.5-二溴水杨基荧光酮的荧光增强动力学反应性质,讨论了流速、进样时间对方法灵敏度和精密度的影响,提出了一个快速、简便、精确测定钛的分析方法,并用于稀土样品及合成样品中痕量钛的测定.方法检测限为8×10~(-3)ppm,大多数元素的干扰均可用动力学方法消除.     

A convection/reaction/switching system

We consider a spatially distributed hybrid system consisting of a convection/reaction system in which the reaction switches discontinuously in time between modes, independently at each spatial point on reaching “switching thresholds”. The model involves a novel formulation for evolution of the free boundary between the modal regions.