How I Do It: Miniplate Reconstruction of the Lateral Thyroid Lamina: One-Stage Restoration of Voice After Teflon Granuloma Resection

This case report describes a one-stage technique for long-term voice restoration and laryngeal reconstruction in the treatment of Teflon (Dupont, Wilmington, Delaware) granuloma. A patient who presented with severe dysphonia underwent resection of a Teflon granuloma via a lateral laryngotomy. A pedicled strap muscle flap was used to reconstruct the paraglottic space. The muscle flap was positioned through the lateral laryngotomy with direct endoscopic visualization of the endolarynx to ensure correct vertical positioning and medialization of the vocal fold. The muscle flap was secured in this position with suture fixation. The trapdoor piece of cartilage that was elevated to create the window in the lateral thyroid lamina was repositioned over the pedicled muscle flap and reinforced with a titanium miniplate, which was secured to the remaining thyroid cartilage. The patient had excellent voice results and has not required revision or augmentation. Reinforcement of the lateral thyroid lamina using titanium miniplate fixation helps to stabilize the muscle pedicle flap and the position of the vocal fold, in this case resulting in good long-term voice results after a single-stage reconstruction.     

Hydroxylation-induced modifications of the Al2O3/NiAl(0 0 1) surface at low water vapour pressure

STM, STS, LEED and XPS data for crystalline θ-Al₂O₃ and non-crystalline Al₂O₃ ultra-thin films grown on NiAl(0 0 1) at 1025 K and exposed to water vapour at low pressure (1 × 10⁻⁷-1 × 10⁻⁵ mbar) and room temperature are reported. Water dissociation is observed at low pressure. This reactivity is assigned to the presence of a high density of coordinatively unsaturated cationic sites at the surface of the oxide film. The hydroxyl/hydroxide groups cannot be directly identify by their XPS binding energy, which is interpreted as resulting from the high BE positions of the oxide anions (O_1s signal at 532.5-532.8 eV). However the XPS intensities give evidence of an uptake of oxygen accompanied by an increase of the surface coverage by Al³⁺ cations, and a decrease of the concentration in metallic Al at the alloy interface. A value of ∼2 for the oxygen to aluminium ions surface concentration ratio indicates the formation of an oxy-hydroxide (AlO_xOH_y with x + y ∼ 2) hydroxylation product. STM and LEED show the amorphisation and roughening of the oxide film. At P(H₂O) = 1 × 10⁻⁷ mbar, only the surface of the oxide film is modified, with formation of nodules of ∼2 nm lateral size covering homogeneously the surface. STS shows that essentially the valence band is modified with an increase of the density of states at the band edge. With increasing pressure, hydroxylation is amplified, leading to an increased coverage of the alloy by oxy-hydroxide products and to the formation of larger nodules (∼7 nm) of amorphous oxy-hydroxide. Roughening and loss of the nanostructure indicate a propagation of the reaction that modifies the bulk structure of the oxide film. Amorphisation can be reverted to crystallization by annealing under UHV at 1025 K when the surface of the oxide film has been modified, but not when the bulk structure has been modified.     

CuPc molecules adsorbed on Au(1 1 0)-(1 × 2): growth morphology and evolution of valence band states

We present the growth morphology, the long-range ordering, and the evolution of the valence band electronic states of ultrathin films of copper phthalocyanine (CuPc) deposited on the Au(1 1 0)-(1 × 2) reconstructed surface, as a function of the organic molecule coverage. The low energy electron diffraction patterns present a (5 × 3) reconstruction from the early adsorption stages. High-resolution UV photoelectron spectroscopy data show the disappearance of the Au surface states related to the (1 × 2) reconstruction, and the presence of new electronic features related to the molecule-substrate interaction and to the CuPc molecular states. The CuPc highest occupied molecular orbital gradually emerges in the valence band, while the interface electronic states are quenched, upon increasing the coverage.     

3D MRI of non-Gaussian (3)He gas diffusion in the rat lung

In (3)He magnetic resonance images of pulmonary air spaces, the confining architecture of the parenchymal tissue results in a non-Gaussian distribution of signal phase that non-exponentially attenuates image intensity as diffusion weighting is increased. Here, two approaches previously used for the analysis of non-Gaussian effects in the lung are compared and related using diffusion-weighted (3)He MR images of mechanically ventilated rats. One approach is model-based and was presented by Yablonskiy et al., while the other approach utilizes the second order decay contribution that is predicted from the cumulant expansion theorem. Total lung coverage is achieved using a hybrid 3D pulse sequence that combines conventional phase encoding with sparse radial sampling for efficient gas usage. This enables the acquisition of nine 3D images using a total of only approximately 1 L of hyperpolarized (3)He gas. Diffusion weighting ranges from 0 s/cm(2) to 40 s/cm(2). Results show that the non-Gaussian effects of (3)He gas diffusion in healthy rat lungs are directly attributed to the anisotropic geometry of lung microstructure as predicted by the Yablonskiy model, and that quantitative analysis over the entire lung can be reliably repeated in time-course studies of the same animal.     

Initial stages of oxidation of Cu(1 1 1)

Several surface analysis techniques were combined to study the initial stages of oxidation of Cu(1 1 1) surfaces exposed to O₂ at low pressure (<5 × 10⁻⁶ mbar) and room temperature. Scanning tunneling microscopy (STM) results show that the reactivity is governed by the restructuring of the Cu(1 1 1) surface. On the terraces, oxygen dissociative adsorption leads to the formation of isolated O adatoms and clusters weakly bound to the surface. The O adatoms are located in the fcc threefold hollow sites of the unrestructured terraces. Friedel oscillations with an amplitude lower than 5 pm have been measured around the adatoms. At step edges, surface restructuring is initiated and leads to the nucleation and growth of a two-dimensional disordered layer of oxide precursor. The electronic structure of this oxide layer is characterised by a band gap measured by scanning tunneling spectroscopy to be ∼1.5 eV wide. The growth of the oxide islands progresses by consumption of the upper metal terraces to form triangular indents. The extraction of the Cu atoms at this interface generates a preferential orientation of the interface along the close-packed directions of the metal. A second growth front corresponds to the step edges of the oxide islands and progresses above the lower metal terraces. This is where the excess Cu atoms extracted at the first growth front are incorporated. STM shows that the growing disordered oxide layer consists of units of hexagonal structure with a first nearest neighbour distance characteristic of a relaxed Cu-Cu distance (∼0.3 nm), consistent with local Cu₂O(1 1 1)-like elements. Exposure at 300 °C is necessary to form an ordered two-dimensional layer of oxide precursor. It forms the so-called “29” superstructure assigned to a periodic distorted Cu₂O(1 1 1)-like structure.     

改进的同步迭代算法在光声血管成像中的应用

光声成像结合了光学成像和声学成像的优点，是一种高分辨率，高对比度的无损伤医学成像技术.一种改进的同步迭代算法应用于光声图像重建.仿真和模拟结果表明，与传统的代数迭代算法相比，在90°，135°，180°的有限场光声成像中，此算法对测量误差的校正和迭代次数的收敛上具有较大的优势，图像重建的速度和成像质量都有了明显的提高.实验中，一种圆形扫描结构的光声成像装置，用于180°的有限场扫描，利用改进的同步迭代算法，重建出了高对比度和高分辨率（60μm）的鸡胚胎光声血管图像.实验证明，这种算法的应用，大幅度减少了数据采集时间，为光声成像技术运用于实时监测血流灌注和肿瘤光动力治疗的血管损伤效应提供了潜在的应用价值. 关键词： 光声成像 有限角度 代数迭代算法 光声血管成像     

基于彩色扫描仪的图像光谱重构

针对彩色扫描仪的特点,采用主元分析法(PCA)和反向传播(BP)人工神经网络(ANN)相结合的方法对图像光谱重构进行研究。选择IT8.7/2标准色卡作为训练样本,将该色卡中的另一组色靶作为检验样本以讨论不同网络结构以及不同主元数和训练样本数对光谱重构的影响,再以自然色系统(NCS)色卡为检验样本来分析不同种类的训练和检验样本与光谱重构性能的关系。实验结果表明,采用3-14-6网络结构和6个主元数是最佳选择,训练样本和扫描目标之间的一致性是基于彩色扫描仪图像光谱重构的关键所在。     

基于空间光调制器的波面重建优化方法研究

针对不同非球面面形的实时检测需求,研究了基于空间光调制器的标准波面重建技术.基于空间光调制器波面重建的原理设计了干涉测量系统,依据空间光调制器的自身特点选取修正离轴计算全息编码方式实现对标准球波面的编码.针对实验中空间光调制器作为全息再现介质引起重建波面质量下降问题,提出了错位叠加优化方案,并将这一过程进行了模拟实验....     

基于小波域马尔可夫随机场模型的压缩传感图像重构

目前在压缩传感重构算法中利用图像的可稀疏性表示先验知识,从比奈奎斯特采样少得多的观测值中恢复原始图像。除了稀疏性之外,邻域系数的相关性也可以作为先验知识加速重构算法收敛。为了克服目前算法中没有利用邻域系数相关性的缺点,提出了基于小波域马尔可夫随机场模型的压缩传感图像重构算法,根据显著性度量对变换系数进行分类得到具有马尔可夫性的初始掩模,利用ICM算法完成掩模优化,实现系数更新,并将算法与未考虑邻域相关性的算法进行了比较。实验结果证明了算法的有效性。     

Molecular dynamics simulation of the (0 0 0 1) α-Al2O3 and α-Cr2O3 surfaces

A simple, rigid pair-potential model is applied to investigate the dynamics of the (0 0 0 1) α-Al₂O₃ and α-Cr₂O₃ surfaces using the molecular dynamics technique. The simulations employ a two-stage equilibration process: in the first stage the simulation-cell size is determined via the constant-stress ensemble, and in the second stage the equilibration of the size-corrected simulation cell is continued in the canonical ensemble. The thermal expansion coefficients of bulk alumina and chromia are evaluated as a function of temperature. Furthermore, the surface relaxation and mean-square displacement of the atoms versus depth into the slab are calculated, and their behaviour in the surface region analysed in detail. The calculations show that even moderate temperatures (∼400 °C) give rise to displacements of the atoms at the surface which are similar to the lattice mismatch between α-alumina and chromia. This will help in the initial nucleation stage during thin film growth, and thus facilitate the deposition of α-Al₂O₃ on (0 0 0 1) α-Cr₂O₃ templates.