电化学法测定几种稀土贮氢合金的热力学函数

贮氢材料由于能可逆地吸放氢,得到了广泛地应用.特别是以贮氢材料为负极制成的氢镍二次电池,容量为同类型镉镍电池的1.5～2倍,且电压又相近,是镉镍电池的理想换代产品,受到人们普遍的关注。LaNi_(4.5)Mn_(0.5),LaNi_(4.9)Sn_(0.1)和La_(0.8)Nd_(0.2)Ni_(2.5)Co_(2.4)Al_(0.1)是电化学性能较优越的贮氢合金。LaNi_(4.5)Mn_(0.5)的电化学容量高,理论容量可达400mAh.g~(-1).LaNi_(4.9)Sn_(0.1)和La_(0.8) Nd_(0.2)     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

Capacity factors and peak widths in the gradient elution reversed phase separation of high molar mass polystyrenes

Summary A simplex method for determining the constantsS andk _o from the equation lnk’=lnk _o−S ϕ (was developed and applied to the reversed phase separation of high molar mass polystyrenes using gradients of any curvature. Experimental retention times described using the equation had a standard deviation of 1.1%. The inclusion of a quadratic term in the equation was found to be unwarranted. BothS and lnk _o varied linearly with ln molar mass. The logarithm of peak width of an eluting polystyrene peak was found to be a linear function of the mobile phase composition at elution. The slope was equal toS.     

Chromatographic performance of deuterated solvents in reversed phase micro high performance liquid chromatography

The chromatographic performance of the deuterated solvents, CD₃OD and D₂O, has been investigated in reversed-phase micro high performance liquid chromatography. The chromatographic performance of CD₃OD is only slightly superior to that of CH₃OH. However, the performance of D₂ is significantly superior to that of H₂O, separation of aromatics being improved by about 30%. D₂ is a particularly powerful solvent for the separation iof deuterated and non-deuterated compounds.     

盐类和温度对非离子型表面活性剂溶液粘度的影响

研究在各种盐类存在下,温度对非离子表面活性剂(OP类)溶液粘度的影响,发现相对粘度的对数值与1/T呈线性关系,从直线的斜率可得活化自由能ΔG′。由热力学关系式可计算粘性流体的活化焓ΔII′和活化熵ΔS′。用所得热力学函数对胶束型态的转化进行了讨论。     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.     

Thermodynamics of complexation of lanthanides and some of transition metal ions by 5,5-dimethyl-cyclohexane-2-(2-hydroxyphenyl)-hydrazono-1,3-dione (DCPHD) and its derivatives

Summary Equilibrium betweenDCPHD,DC-4-Cl-PHD, andDC-4-Me-PHD and protons, transition, and lanthanide ions have been investigated at 30 °C by means of potentiometric titration in 75% (v/v) methanol-water mixture containing 0.10M KNO₃ as a constant ionic medium. Thermodynamic parameters (G, H and S) referring to the formation of species HL ^–,L ^––,ML ^+n–2 andML ₂ ^+n–4 (L ^–– denotes the ligand anion) have been determined in solutions. The solvent effects on the thermodynamic parameters of the complex formation are discussed in terms of differences in the donor ability of methanol and water solvents. The plots of thermodynamic parameters versus ionic potential (Z ²/r) of the lanthanide elements is not linear as expected from ionic theory. The obtained curve can be resolved in an initial group (the lighter lanthanides), an intermediate group (Sm-Dy), and a final group (the heavier ones, Tb-Lu). This behavior was explained in terms of differences in the dehydration of lighter lanthanide(III) from that of heavier ones.

---

Thermodynamik der Komplexierung von Lanthaniden und einigen Übergangsmetall-Ionen mit 5,5-Dimethylcyclohexyl-2-(2-hydroxyphenyl)-hydrazono-1,3-dion (DCPHD) und seinen Derivaten

Zusammenfassung Die Gleichgewichte zwischenDCPHD,DC-4-Cl-PHD undDC-4-Me-PHD mit Protonen, Übergangsmetall- und Lanthaniden-Ionen wurden bei 30 °C mittels potentiometrischer Titration in 75% (v/v) Methanol-Wasser mit einem Gehalt an 0.10M KNO₃ als konstantem ionischem Medium untersucht. Die thermodynamischen Parameter G, H und S zur Bildung der Spezies HL ^–,L ^––,ML ^+n–2 undML ₂ ^+n–4 (L ^–– steht für das Ligandenanion) wurden in Lösung bestimmt. Die Lösungsmitteleffekte auf diese Komplexbildungsparameter werden auf Basis der Differenz im Donorvermögen von Methanol und Wasser als Solventien diskutiert. Die Diagramme der thermodynamischen Parameter gegen die ionischen Potentiale (Z ²/r) der Lanthaniden sind, wie nach der Ionentheorie zu erwarten, nicht linear. Die erhaltene Kurve läßt eine Anfangsgruppe (die leichteren Lanthaniden), eine mittlere Gruppe (Sm-Dy) und eine Endgruppe (die schwereren Lanthaniden. Tb-Lu) erkennen. Dieses Verhalten kann aus dem Unterschied im Dehydratationsverhalten erklärt werden.

     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Errors involved in the activation energy calculated by integral methods when the frequency factor depends on the temperature ( A = A 0 T m)

The dependence of the frequency factor on the temperature (A=A ₀ T ^m) has been examined and the errors involved in the activation energy calculated from some integral methods without considering such dependence have been estimated. Investigated integral methods are the Coats-Redfern method, the Gorbachev-Lee-Beck method, the Wanjun-Yuwen method and the Junmeng-Fusheng method. The results have shown that the error in the determination of the activation energy calculated ignoring the dependence of the frequency factor on the temperature can be rather large and it is dependent on x=E/RT and the exponent m.     

计算金属间化合物热力学性质的新方法

用一简单的相关函数式对金属间化合物的热力学性质进行拟合，提出了一种计算金属间化合物热力学性质的新方法，并用此方法计算了二元金属间化合物的常温热容和熵。计算结果表明，该方法简单，且能满足一定的计算精度，有一定的实用价值。