Atmospheric degradation mechanisms of a simulant organophosphorus pesticide isopropyl methyl methylphosphonate: A theoretical consideration

Calculations using density functional theory were performed to explore the mechanisms for atmospheric degradation of isopropyl methyl methylphosphonate (IMMP). The potential energy surface profiles for OH‐initiated reaction of IMMP were constructed, and all possible degradation channels were considered. Rate constants were further calculated using transition state theory. It was established from these calculations that H‐abstractions from alkyl groups have much lower energy barriers than substitutions of alkoxyl groups, and four possible H‐abstraction channels are competitive. Investigations into the secondary reactions under the presence of O₂/NO were also performed. It is shown that O₂ addition, reaction of peroxide radicals with NO to form RO radicals, and removal of ·RO are the major degradation pathways for alkyl radicals. Four selected products, CH₃OP(O)(CH₃)OC(O)CH₃, CH₃OP(O)(O)CH₃, (CH₃)₂CHOP(O)(CH₃)OH, and (CH₃)₂CHOP(O)(CH₃)OCH?O, are predicted to be the major products in this study. © 2013 Wiley Periodicals, Inc.     

Study of the degradation of a new PLA braided biomaterial in buffer phosphate saline,basic and acid media,intended for the regeneration of tendons and ligaments

The purpose of this study was to evaluate the effects of hydrolytic degradation on the properties of a PLA hollow braid designed as a new concept of biodegradable prosthesis for the regeneration of tendons and ligaments. The main function of the braided material is to bear mechanical loads while it is being replaced by the newly-generated tissue. The kinetics of braided material degradation is thus an important factor in determining the success of the product. In order to study this mechanism, PLA braid was subjected to a 12-month degradation process at 37 °C in PBS at pH 7.4 (to simulate the human physiological medium) and to accelerated degradation for one month in pH 12 and pH 3 solutions. Degradation of the braid subjected to hydrolysis was evaluated by weight loss, molecular weight distribution, mechanical properties, and calorimetric and morphologic analyses. The weight loss in a basic medium reached 21%, versus no significant change in the other media. Average molecular weight was reduced by approximately 50% in the three media, with loss of mechanical properties in all cases. The morphological changes were more evident in the PLA degraded in the basic medium. The crystallinity of the material increased at the first stages of degradation, regardless of the medium used.     

Thermal and thermo-oxidative degradation of high density polyethylene/fullerene composites

Fullerene (C₆₀)/high density polyethylene (HDPE) composites were studied in order to understand for their behaviors on thermal and thermo-oxidative degradation. Under different atmosphere, the influences of C₆₀ on the thermal stability of HDPE are different. Thermogravimetric analysis coupled to Fourier transform infrared spectroscopy (TG-FTIR) and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) demonstrate that in N₂ the addition of C₆₀ increases the onset decomposition temperature by about 10 °C with more heavy compounds (more than 34 carbon). Also the thermal stability of HDPE in air is remarkably improved with the addition of C₆₀. When the content of C₆₀ is 2.5 wt% the onset decomposition temperature increases by about 91 °C. The results of viscoelastic behavior and gel content reveal that C₆₀ can trap the alkyl radicals and alkyl peroxide radicals to inhibit hydrogen abstraction to suppress the chain scission and preserve the long chain structure. However, in the absence of C₆₀ or with low C₆₀ concentration, hydrogen abstraction occurs, resulting in the formation of a series of alkyl radicals and alkyl peroxide radicals, which accelerates the chain scission and plays a leading role in the thermal oxidative degradation.     

Synthesis of a novel sulfur-bearing secondary antioxidant with a high molecular weight and its comparative study on antioxidant behavior in polypropylene with two commercial sulfur-bearing secondary antioxidants having relatively low molecular weight

A novel sulfur-bearing secondary antioxidant with a high molecular weight of 2252 (OS-POSS), successfully synthesized via photoinitiated thiol-ene click reaction, was compared with two commercial sulfur-bearing secondary antioxidants on the stabilization of polypropylene (PP). The results of their oxidation induction time (OIT) via differential scanning calorimeter measurement (DSC) showed that the higher the molecular weight of secondary antioxidant is, the longer the OIT value, whether such sulfur-bearing antioxidant is used singly or in combination with primary antioxidant. The study of their long-term accelerated thermal aging in the air oven at 150 °C displayed that the molecular structure of sulfur-bearing secondary antioxidant, besides molecular weight, is another highly important factor determining the antioxidant efficiency, i.e., physical loss of antioxidants with the relatively low molecular weight may determine antioxidant efficiency, whereas thioether groups having neighboring ester carbonyl moieties may decompose more hydroperoxides with quicker rate.     

Conductive liquid crystalline compounds having a piperazine structure

New conductive thermotropic liquid crystalline materials having a piperazine ring in the central core: 1-[4-(9-decenyloxy)phenyl]-4-alkylpiperazines (6) were synthesized. The mesomorphic behaviours of these compounds and their conductivity in the liquid crystal phase were measured. The principal features of these compounds are to exhibit a smectic B phase around room temperature (for example 6: Cr 50 SmB 81 I, °C) and to exhibit a large dark current (6d: 430 μA cm^?2, applied voltage 20 V, at 70°C) in the smectic B phase.     

溶剂热合成可调控氧空位的Bi2MoO6纳米晶及其光催化氧化制喹啉和抗生素降解

近年来,半导体光催化在环境净化和有机合成领域的研究引起了广泛的重视.其中,在有机合成领域中,光催化技术已经应用在醇类、环己烷以及芳香族化合物的选择性氧化研究.而另一类具有特殊结构的有机物——N-杂环芳烃,在药物化学和材料科学中具有重要意义.而传统用于合成N-杂化芳烃的脱氢催化氧化反应通常需要高温高压的苛刻环境,传统方法通常还需要使用贵金属催化剂,这也增加了N-杂化芳烃的合成成本;另外,如果合成是均相催化过程,则催化剂难以实现回收利用.因此,开发室温常压条件下的非贵金属多相光催化技术具有巨大的应用前景.本文以能够被可见光驱动的钼酸铋半导体为催化剂,利用氧缺陷策略来提升钼酸铋的光催化氧化性能.不同于传统氧缺陷制备方法(氢气还原热处理、离子掺杂等),本文采用一种低成本的乙二醛辅助溶剂热的方法合成具有可调控的含氧空位Bi₂MoO₆催化剂(OVBMO).通过X射线粉末衍射(XRD)、扫描电镜、透射电镜、紫外可见漫反射吸收光谱、氮气物理吸附脱附、X射线光电子能谱(XPS)、电子自旋共振光谱、光致发光光谱及电化学测试等技术对制备的OVBMO材料进行了物理化学性质及能带研究.XPS,XRD,Raman和FT-IR结果表明,氧空位存在于[Bi₂O₂]²⁺和MoO₆八面体的层间.紫外可见漫反射结果表明,随着氧空位的引入,Bi₂MoO₆的光吸收范围扩大,带隙变窄.结合莫特肖特基和VBXPS分析获得OVBMO的能带位置,发现氧空位的存在不仅会导致禁带中出现缺陷带能级,还会导致价带顶位置上移,促进光生空穴的迁移.PL和电化学结果表明,氧空位的存在使得载流子浓度、载流子的分离能力与界面电荷迁移能力都有较大提升,这是因为氧空位引入的缺陷能级可以浅势捕获电子,抑制光催化剂中的电子与空穴的复合,改变化学反应的速率.同时,氧空位有助于捕获分子氧,分子氧与捕获的光生电子发生反应,产生更多的超氧自由基(·O₂)和空穴(h⁺),从而极大地提升光催化剂的氧化性能.因此,OVBMO在1,2,3,4-四氢喹啉脱氢氧化产生喹啉及系列抗生素(环丙沙星、四环素、盐酸土霉素)的降解反应中,表现出较好的光催化氧化性能.结合多种表征分析,本文还进一步阐明了OVBMO催化剂将1,2,3,4-四氢喹啉脱氢氧化为喹啉的自由基参与的多相催化反应机理.     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.     

Degradation of 4-chloro 2-aminophenol using combined strategies based on ultrasound,photolysis and ozone

The present work investigates the degradation of 4-chloro 2-aminophenol (4C2AP), a highly toxic organic compound, using ultrasonic reactors and combination of ultrasound with photolysis and ozonation for the first time. Two types of ultrasonic reactors viz. ultrasonic horn and ultrasonic bath operating at frequency of 20 kHz and 36 kHz respectively have been used in the work. The effect of initial pH, temperature and power dissipation of the ultrasonic horn on the degradation rate has been investigated. The established optimum parameters of initial pH as 6 (natural pH of the aqueous solution) and temperature as 30 ± 2 °C were then used in the degradation studies using the combined approaches. Kinetic study revealed that degradation of 4C2AP followed first order kinetics for all the treatment approaches investigated in the present work. It has been established that US + UV + O₃ combined process was the most promising method giving maximum degradation of 4C2AP in both ultrasonic horn (complete removal) and bath (89.9%) with synergistic index as 1.98 and 1.29 respectively. The cavitational yield of ultrasonic bath was found to be eighteen times higher as compared to ultrasonic horn implying that configurations with higher overall areas of transducers would be better selection for large scale treatment. Overall, the work has clearly demonstrated that combined approaches could synergistically remove the toxic pollutant (4C2AP).     

Ni-N-C单原子催化剂活化过硫酸盐降解苯酚

采用煅烧法制备了以木质素生物炭为载体的单原子催化剂(Ni-N-C-10), 用于高效活化过硫酸盐(PMS)降解苯酚. 利用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 经球差校正的高角度环形暗场扫描透射电子显微镜(AC-HAADF-STEM)、 X射线粉末衍射仪(XRD)以及X射线光电子能谱仪(XPS)等对材料进行了表征分析, 证明合成了原子分散的催化剂Ni-N-C-10. 探究了制备过程中双氰胺的投加量和降解实验中催化剂投加量、 PMS投加量、 pH值以及温度对苯酚降解的影响. 结果表明, 在催化剂制备过程中, 加入10倍质量比的双氰胺更有利于实现原子分散. Ni-N-C-10/PMS体系在较低的催化剂和PMS投加量、 以及较宽的pH值范围(3~9)内都能有效活化PMS降解苯酚. 此外, 该体系的稳定性好且应用范围广, 除了能高效降解苯酚外还能快速降解双酚A、 四环素和亚甲基蓝. 电子顺磁共振检测和自由基淬灭实验结果表明, Ni-N-C-10/PMS体系降解苯酚为SO₄^?-、 ·OH和¹O₂ 3种主要活性物种共同作用的结果, 其中¹O₂起主导作用. 反应前后Ni-N-C-10催化剂的XPS分析结果表明, 催化降解苯酚的效率与Ni位点呈正相关.