Morphology studies and ac electrical property of low density polyethylene/octavinyl polyhedral oligomeric silsesquioxane composite dielectrics

This paper presents the results of morphological and ac electrical investigations on low density polyethylene (LDPE) composites with octavinyl polyhedral oligomeric silsesquioxane (POSS). It has been shown that at low loadings, the frequency dependence of dielectric constant and dielectric loss for the LDPE/POSS composites showed unusual behaviors when compared with conventional (micro-sized particulates) composites. The ac breakdown strength was measured and statistical analysis was applied to the results to determine the effects of POSS loadings on the dielectric strength of LDPE. The morphological characterization showed that the presence of POSS additives apparently altered the supermolecular structure of LDPE and resulted in more homogeneous morphology when compared with the neat LDPE. The structure-property relationship was discussed and it was concluded that the final dielectric properties of the composites were determined not only by the incorporation of POSS additives but also by the supermolecular structure of LDPE. Rheological analyses of LDPE/POSS composite were also performed and the results showed that the octavinyl-POSS had good compatibility with LDPE.     

单功能基叔胺型弱碱树脂的合成及其滴定曲线研究

合成了以苯乙烯－二乙烯苯为骨架的若干叔胺型弱碱性树脂，研究了胺化反应条件，胺化试剂及交联度等对叔胺产碱树脂功能单一性的影响，测定了强碱交换量低的叔胺树脂的滴定曲线特征，找到了适合作为热再生树脂弱碱组分的单功能基叔胺树脂的合成条件。     

Local modes of molecular mobility in comb-shaped liquid crystalline ionomers containing alkaline metal ions

Molecular mobility of the comb-shaped copolymer poly(4-[6-(acryloyloxy)hexyloxy]benzoic acid-co-butyl acrylate) and Li- and Rb-containing LC ionomers based on this polymer was studied at low temperatures by the methods of dielectric spectroscopy and thermally stimulated depolarization current. The above copolymers are shown to experience the γ₂, γ₁, and β-processes, which are related by the reorientation of the end СООН groups, by the mobility of a spacer, and by the reorientation of mesogenic fragments (dimers of oxybenzoic acids) with respect to a long axis, respectively. The formation of multiplet structures in ionomers leads to a suppression of the intensity of the β-process that relates with a partial breakdown of hydrogen-bonded dimmers and with a decrease of their molecular mobility.     

Thermally degradable maleimides for reworkable adhesives

New thermosetting materials were developed for reworkable adhesive applications by introducing acetal ester groups as thermally degradable linkages into maleimide compounds. The synthesis of compounds containing maleimide functionality and acetal ester linkages was conducted by a one‐step neat reaction from commercially available materials. The polymerization process and thermal degradation of the synthesized materials were studied. It was found that the acetal ester linkage degraded rapidly above 225 °C, and introduction of this linkage into the adhesive formulation led to improved reworkability of adhesively bonded substrates. A mechanism for reworkability was proposed based on the insight provided by experimental and modeling work. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1073–1084, 2009     

Emitting layer analysis of blue thermally activated delayed fluorescence devices using capacitance–voltage method

In this paper, blue thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) have been elucidated, with a focus on the degradation characteristics of the emission layer (EML). The operational stability against electrical stress was investigated for two host materials and four doping concentrations, which were used as the EML. The operating stability of the devices was confirmed by comparing the peak capacitance before and after degradation. Devices using bis [2-(diphenyl-phosphino) phenyl] ether oxide (DPEPO) as a host exhibited poor degradation characteristics. However, high stability was confirmed when 3,3-di (9H-carba-zol-9-yl)-biphenyl (mCBP) was used. DPEPO host devices are most resistant against performance degradation when they are doped with 10 wt% 10,10'-(4,4′-sulfonylbis(4,1-phenylene))bis(9,9-dimethyl-9,10-dihydroacridine (DMAC-DPS). We successfully determined the electroluminescence characteristics of the device depending on the host material, as well as the doping concentration, using the capacitance–voltage method.     

Enzyme-mediated biodegradation of heat treated commercial polyethylene by Staphylococcal species

Extruded low-density polyethylene (LDPE) films commonly available in the market as 20-micron thick carrier bags were autoclaved, overlaid on nutrient agar plates and inoculated with BP/SU1 strain of Staphylococcus epidermis. The nutrient agar plate showed growth of the organism within two to three days. The polymer film supporting the growth of the organism showed pore formation as recorded by SEM analysis. The growth of BP/SU1 is supported by the presence of shredded LDPE as its only carbon source in inorganic salt minimal nutrient medium. The organism survives even after three months of inoculation and this is accompanied by gradual breakdown of the size of the shredded plastic as seen by light scattering. The cell-free supernatant of the organism, grown with the help of shredded plastic shows the presence of the over expressed proteins with approximate molecular weight of about 55 kDa and 35 kDa, through SDS-PAGE analysis.     

Synthesis and characterization of optically active polyamides based on 2-(1,3-isoindolinedione-2-yl)glutaric acid by direct polycondensation

<正>Five new optically active polyamides(PAs) 6a-6e were prepared by direct polycondensation reaction of 2-(1,3- isoindolinedione-2-yl)-glutaric acid 4 as a new chiral diacid with various aromatic diamines 5a-5e in a medium consisting of triphenyl phosphite(TPP),calcium chloride,pyridine(Py) and N-methyl-2-pyrrolidone(NMP).The polycondensation reaction produced a series of polyamids 6a-6e in quantitative yields with inherent viscosities of 0.26-0.39 dL/g.The resulting polymers were fully characterized by means of ~1H-NMR,FT-IR spectroscopy,elemental analysis,inherent viscosity and specific rotation.Thermal properties of these polymers were investigated using thermal gravimetric analysis (TGA) and differential thermal gravimetry(DTG).Phthalimide rings as a bulky pendent group in the polymer chains disturb the interchain and intrachain interactions and make these PAs readily soluble in polar,aprotic solvents such as N,N-dimethyl acetamide(DMAc),N,N-dimethyl formamide(DMF),dimethyl sulfoxide(DMSO),N-methyl-2-pyrrolidone(NMP) and sulfuric acid.     

Structure and performance of polyamide-6 membranes prepared by thermally induced phase separation

<正>The asymmetric polyamide-6(PA6) membranes were prepared by thermally induced phase separation.From the scanning electron microscopy(SEM) images,it is observed that with the increase of silicon dioxide(SiO_2) content the structure of obtained membranes gradually varied from cellular structure to large ball-shaped cluster aggregates. Subsequently,with the addition of SiO_2,pure water flux increased first and then decreased,while rejection showed the opposite trend.Besides,raising the coagulation bath temperature was favorable to increase pure water flux.Consequently, different membrane morphologies and performance were obtained by changing SiO_2 content and coagulation bath temperature.     

Preparation of high density polyethylene/polyethylene-block-poly(ethylene glycol) copolymer blend porous membranes via thermally induced phase separation process and their properties

<正>High density polyethylene(HDPE)/polyethylene-block-poly(ethylene glycol)(PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation(TIPS) process using diphenyl ether(DPE) as diluent.The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry(DSC).By varying the content of PE-b-PEG,the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy(SEM) and wide angle X-ray diffraction(WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis,Fourier transform infrared spectroscopy-attenuated total reflection(FTIR-ATR) and X-ray photoelectron spectroscopy(XPS).Water contact angle,static protein adsorption and water flux experiments were used to evaluate the hydrophilicity,antifouling and water permeation properties of the membranes.It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes.In the investigated range of PE-b-PEG content,the PEG blocks could not aggregate into obviously separated domains in membrane matrix.More importantly,PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation,but also enrich at the membrane surface layer.Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity,protein absorption resistance and water permeation properties,which would be substantially beneficial to HDPE membranes for water treatment application.