聚[碳酸(亚丁酯-co-ε-己内酯)酯]的制备及其载药微球性能的研究

采用阴离子配位聚合方法, 合成了二氧化碳、1,2-环氧丁烷与ε-己内酯的三元共聚物: 聚[碳酸(亚丁酯-co-ε-己内酯)酯](PBCL). 并采用复相乳液(W/O/W)溶剂挥发法制备了包裹抗菌药物甲磺酸帕珠沙星的可降解微球. 对聚合物进行了FTIR, ¹H NMR, ¹³C NMR, DSC, TGA和WAXD等表征, 以及降解性能和载药微球特性的研究. 结果表明, PBCL热稳定性及降解性能优于聚碳酸亚丁酯(PBC). 所得PBCL微球球形规整、表面光滑. 大部分微球粒径在0.5～1 μm的范围内, 载药量和包封率分别达到38.21%和87.9%. 微球的体外释药性能研究在pH 7.4的磷酸缓冲溶液中进行, 释放21 d后, PBCL微球的累积释药量为84.74%, PBC微球的释药量仅为17.29%. 药物的体外释放行为符合Higuchi方程. PBCL载药微球具有长效缓释作用.     

Analysis of organic pollutants in water at trace levels using fully automated solid-phase extraction coupled to high-performance liquid chromatography

Summary A method has been developed for the determination of trace levels of 32 pesticides, 19 explosives and 16 polycyclic aromatic hydrocarbons (PAH) in water in three individual steps. Solid-phase enrichment (SPE) is coupled to high-performance liquid chromatography (HPLC) with a fully automated system. The organic pollutants are enriched on reusable cartridges packed with adsorbent materials: pesticides and explosives on a mixed bed of divinylbenzene-ethylvinylbenzene copolymers (LiChrolut EN^?) and perfluorinated polyethylene (PolyF^?), and polycyclic aromatic hydrocarbons on C₁₈-modified silica (Zorbax^? ODS1). Thermally assisted desorption (TAD) has been shown to increase the recovery of analytes significantly. As all enriched analytes are transferred to the detector, only fifty millilitres of sample is needed for each single on-line analysis, compared with at least a litre for conventional methods. The separation of the enriched organic analytes is performed on specialized HPLC columns based on reversed-phase materials. The limits of detection of the system employed were found to be below 100 ng L⁻¹. Use of fluorescence detection for the polycyclic aromatic hydrocarbons resulted in limits of detection in the upper pg L⁻¹ range. Thek values, number of theoretical plates, the recovery rates and the limits of detection of this method for fast screening of organic pollutants from three fifty-millilitre aqueous samples are described. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Biodegradable and pH-sensitive hydrogels: Synthesis by crosslinking of N,N-dimethylacrylamide copolymer precursors

Novel pH-sensitive hydrogels containing azoaromatic crosslinks were synthesized by the crosslinking of polymeric precursors. First, a reactive polymeric precursor was synthesized by copolymerization of N,N-dimethylacrylamide, N-tert-butylacrylamide, acrylic acid, and N-methacryloylglycylglycine p-nitrophenyl ester. The hydrogel was prepared in the second step by the reaction of the polymeric precursor with N,N′-(ω-aminocaproyl)-4,4′-diaminoazobenzene. The hydrogels were characterized by the network structure, (that is, content of crosslinks, unreacted pendent groups, and cycles), the equilibrium swelling ratio as a function of pH, modulus of elasticity in compression, and the degradability in vitro. The results obtained indicated that the hydrogel network structure strongly depends on the reaction conditions such as polymer concentration, and the ratio of the reactive groups during the crosslinking reaction. The swelling and mechanical properties of hydrogels can be controlled by the modification of polymer backbone structure and/or the crosslinking density. The rates of hydrogel degradation depended on their degree of swelling. The higher the degree of swelling, the higher the degradability. The properties of the hydrogels suggest that they have a potential as carriers for colon-specific drug delivery. © 1994 John Wiley & Sons, Inc.     

Block balance in hydrogenated polybutadiene‐b‐polymethylmethacrylate diblock copolymer for efficient interfacial activity in low‐density polyethylene/polymethylmethacrylate blend: Phase morphology development

The objective of the present study was to determine the best molecular balance between the two hydrogenated polybutadiene (HPB) and polymethylmethacrylate (PMMA) blocks that promotes an HPB‐b‐PMMA diblock copolymer with efficient compatibilization activity in a low‐density polyethylene (LDPE)/PMMA immiscible blend. The model blend selected, LDPE/PMMA, is “more immiscible” than the LDPE/polystyrene pair largely reported in open literature. The blends having a composition of 80LDPE/20PMMA exhibit a droplet‐in‐matrix phase morphology whereas in 20LDPE/80PMMA a co‐continuous phase morphology was developed. In the droplet‐in‐matrix phase morphology, the emulsifying efficiency of the copolymer was evaluated based on the maximum reduction of the PMMA droplet size it is able to promote. Whereas, in the co‐continuous phase morphology, the copolymer was evaluated based on its ability to stabilize the maximum phase co‐continuity. The sequences of the best emulsifying copolymer revealed are not symmetrical. An HPB‐b‐PMMA where the ratio of molar mass of the blocks, _HPB/ _PMMA, is within 1.8–1.95 exhibits a much better interfacial activity in LDPE/PMMA blends than a copolymer of much lower ratio (longer PMMA block). This is ascribed to the much higher interactions (cohesive energy density) encountered in PMMA (PMMA of the copolymer and PMMA phase of the blend) compared with the LDPE side (HPB of the copolymer and LDPE phase of the blend). © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 837–848, 2005     

Synthesis and properties of novel poly(amide-imide)s containing pendent diphenylamino groups

A new dicarboxylic acid, 2,4-bis(N-trimellitoyl)triphenylamine, bearing two preformed imide rings was synthesized from the condensation of 2,4-diaminotriphenylamine and trimellitic anhydride at 1:2 molar ratio. A series of poly(amide-imide)s (PAIs) with inherent viscosities of 0.38-0.66 dl/g were prepared by triphenyl phosphite-activated polycondensation from the diimide-dicarboxylic acid with various aromatic diamines. All the resulting PAIs were readily soluble in a variety of organic solvents and formed strong and tough films via solution casting. These PAIs have useful levels of thermal stability associated with moderately high glass-transition temperatures (259-314 °C) and 10% weight loss temperatures in excess of 530 °C in nitrogen or in air.     

Thermally Stable and Organo-soluble Polyamides Containing Triazine Rings and Ether Linkages in the Main Chain: Synthesis and Characterization

In order to synthesize new polyamide(PA) 5 and copolyamides(Co PA) 7a-7d, a new-type of dicarboxylic acid containing triazine ring was successfully synthesized from 2,4-dichloro-6-methoxy-s-triazine 1 and 4-aminobenzoic acid. New polyamide 5 containing triazine moiety was prepared from 4,4'-(6-methoxy-1,3,5-triazine-2,4-diyl)bis(azanediyl)dibenzoic acid 3 and 4,4′-diaminodiphenylether by direct polycondensation reaction. Then new series thermally stable copolyamides 7a-7d with high solubility in common organic solvents were synthesized from the direct polycondensation reaction of diacid 3 as a first monomer, aliphatic-aromatic diacids 6a-6d as second diacids and 4,4′-diaminodiphenylether. All of the above polymers were fully characterized by 1H-NMR and FTIR spectroscopy, elemental analysis(CHN), inherent viscosity, solubility tests, gel permeation chromatography(GPC), differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA). The resulted Co PAs 7a-7d have shown good inherent viscosities, solubility and thermal properties.     

Sustainable poly(ether amide)s from lignin-derived precursors

In recent years, there have been concerted efforts to replace petrochemical products with those from renewable sources due to the unsustainability of petroleum feedstock, and the continued volatility in the price. This work describes the synthesis and thermal properties of two new lignin-derived poly(ether-amide)s as alternative thermoplastics to petroleum-based commodities. Poly-4-(2-aminoethoxy)benzoate (PEAB) and poly-4-(2-aminoethoxy)-3-methoxybenzoate (PEAV) are synthesized by a melt polycondensation and characterized by ¹H NMR spectroscopy and thermal analysis. The number average molecular weight (M_n) of the polymers are estimated from the ¹H NMR spectroscopy analysis, and were shown to be 4100 and 12,000 g/mol for PEAB and PEAV respectively. The PEAB had a higher decomposition temperature (T_d) as well as glass transition temperature (T_g) compared to PEAV; albeit, with a lower molecular weight. The polymers’ T_d were in the range of 330 °C–380 °C and the T_g were between 100 °C and 120 °C. The thermal properties of the polymers are in the desirable range for thermoplastic materials used in the packaging, storage, and coating industries. Furthermore, the polymers are susceptible to degradation under acidic conditions in a short period; a property that is highly desirable for degradable polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2154–2160     

A degradable atom transfer radical polymerization inimer: Synthesis,polymerization, and cleavage of the resulting polymer products

A novel degradable inimer for atom transfer radical polymerization (ATRP), 2‐(6‐(2‐((2‐bromo‐2‐methylpropanoyl)oxy)ethyl)pyridin‐2‐yl)ethyl methacrylate (PyDEBrMΑ), was synthesized by the two‐step esterification of 2,6‐pyridinediethanol, first with α‐bromoisobutyryl bromide in order to introduce the initiator moiety, and then with methacryloyl chloride in order to introduce the monomer moiety. PyDEBrMA was subsequently used to initiate the self‐condensing ATRP of methyl methacrylate (MMA) to obtain a hyperbranched MMA homopolymer which could be cleaved at the PyDEBrMA residue either by treatment under mildly alkaline hydrolysis conditions (sodium deuteroxide in d₆‐DMSO at room temperature) or thermolysis at 150 °C. The lability of the PyDEBrMA residue arises from the presence in its structure of two 2‐(pyridin‐2‐yl)ethyl ester moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2831–2839     

Copolymerization of 2-Hydroxyethyl Methacrylate with Alkyl Methacrylates. Part IV. Mechanical Properties and Biocompatibility

Mechanical properties of copolymers of 2-hydroxyethyl methacrylate with methyl methacrylate, ethyl methacrylate, and n-butyl methacrylate have been investigated using an Instron tensile tester. It was observed that the overall mechanical properties decrease as the ester alkyl group of alkyl methacrylate becomes bulkier. Biocompatibility of the copolymers was also investigated by implanting them subcutaneously in rats.     

Synthesis and Characterization of Silicone Modified Polyurethane Surfactant Useable at High Temperature

A series of novel silicone modified polyurethane (Si-PU) surfactants were successfully synthesized by using hydroxypropyl-terminated polydimethylsiloxane (HPMS), polyethylene glycol (PEG), dimethylolpropionic acid (DMPA) and isophoronediisocyanate (IPDI). The chemical structure of the surfactant was confirmed by FTIR and ¹H-NMR. TEM photographs showed that the micelles of the Si-PU surfactants dispersed in aqueous solution were spherical with the particle size in the range of 100–400 nm. Surface tension measurements indicated that these surfactants had low surface tension to 29.9 mN·m^?1and a definite critical micelle concentration to, approximately 5.0×10^?4–7.5×10^?4mol·L^?1. When the content of HPMS was 20 wt%, the surfactant's, emulsifying performance was superior to the traditionally available Span80/Tween80 mixed emulsifiers. In addition to that, no phase transition temperature was detected from 20°C to 90°C by fluorescence probe and DSC measurements, confirming the high thermal stability of the micelles.