芴酮引发光接枝改性LDPE膜的研究

采用紫外光引发接枝表面改性的方法,以芴酮(FL)为引发剂,在低密度聚乙烯(LDPE)薄膜表面上接枝丙烯酸(AA)、甲基丙烯酸(MAA)、丙烯酸甲酯(MA)、甲基丙烯酸甲酯(MMA)、丙烯酰胺(AM)等单体,以赋予薄膜表面新的化学性质.考察了引发剂浓度、紫外光的辐照时间、辐照强度、单体种类对LDPE薄膜接枝程度的影响.结果表明,在一定范围内,增加芴酮浓度,可以提高单体的接枝率,但当芴酮浓度达到5%时,接枝率反而下降.延长辐照时间至4 min和提高紫外光的辐照强度达100 W/m2,均有利于接枝反应的进行.不同单体在LDPE膜上的接枝能力与单体的活性、单体与基材的相容性等因素有关.接枝后,LDPE与水的接触角下降程度不仅与单体在膜上的接枝量有关,还与接枝单体的亲水性能密切相关.     

Phase proportioning in CuAlBe shape memory alloys during thermomechanical loadings using electric resistance variation

The microstructure of shape memory alloys changes with the thermomechanical history of the material. During thermomechanical loading, austenite, thermally-induced martensite or stress-induced martensite can be simultaneously present in the material. In applications integrating SMA parts, utilization conditions seriously affect the microstructure and can generate macroscopic strain or stress. Consequently, during thermomechanical loadings, it is important to be able to proportion the different phases and consequently to understand the kinetic transformation. This is very useful in the development of constitutive equations. This study shows, by a series of tests, that the proposed experimental method, based on the measurement of the variation of electric resistance of CuAlBe wires, permits to determine the volume fraction of the different phases present in the material (i.e., austenite, stress-induced martensite and thermally-induced martensite). The proposed method is applied to the most common thermomechanical behavior met in engineering applications of shape memory alloys: pseudoelasticity, pseudoplasticity, recovery-stress and stress-assisted two-way shape memory effect. The proportioning method based on a mixture law integrating the resistivity of pure phases present in the SMA is first performed on different two-phase mixture cases and then applied to a three phase mixture case.     

氯化聚乙烯的热可逆共价交联

采用新型热可逆共价交联剂 ,以溶液反应法使氯化聚乙烯 (CPE)交联制得了凝胶量在 80 %左右的共价交联CPE ,研究了不同牌号CPE、催化剂及其用量、反应温度、反应时间及交联剂用量对CPE交联程度的影响 ,并测定了共价交联CPE的热可逆转化特性     

茂金属聚乙烯和低密度聚乙烯共混物的流变行为

研究了茂金属催化乙烯丁烯1共聚物mPE和LDPE共混物的流变行为.测定了一系列共混物的稳态剪切粘度和动态粘弹性,用改进Cross模型拟合实验数据.mPE的零切粘度η₀较小,从牛顿型转变为非牛顿型所需的剪切速率较大,转变应力较高,在挤出加工剪切速率范围内熔体粘度高,对剪切敏感性差,这是由于它有较低的重均分子量、窄的分子量分布(M_w/M_n=21)所致.对于对数加和规律,共混物η₀在mPE/LDPE为50/50和25/75时有强烈的正偏差,这是由于共混物自由体积减小所致.共混物的转变应力τ^*和非牛顿指数n随LDPE加入量增大而降低,表明共混物对剪切的敏感性提高,加工性得到改善.G'和G”的一致性说明mPE和LDPE共混是相容的.     

低密度聚乙烯的接枝改性

低密度聚乙烯的接枝改性;低密度聚乙烯;甲基丙烯酸缩水甘油酯;非等温结晶Avrami方程     

用简化Acierno模型预测LDPE熔体的触变环实验

考察了简化Acierno型本构方程的预测能力．用简化Acierno方程预测了LDPE(Q200)熔体的触变环实验,比较了该方程和变型Huang方程在拟合和预测触变环实验方面的差异．虽然简化Acierno方程只能拟合LDPE熔体的部分触变环实验,但该方程预测的触变环与实验值的偏差较小,而同样的计算条件下,变型Huang方程的预测结果与实验值相差较大．简化Acierno方程的构造比变型Huang方程的构造更为合理．     

Dually Responsive Poly(N-vinylcaprolactam)-b-poly(dimethylsiloxane)-b-poly(N-vinylcaprolactam) Polymersomes for Controlled Delivery

Limited tissue selectivity and targeting of anticancer therapeutics in systemic administration can produce harmful side effects in the body. Various polymer nano-vehicles have been developed to encapsulate therapeutics and prevent premature drug release. Dually responsive polymeric vesicles (polymersomes) assembled from temperature-/pH-sensitive block copolymers are particularly interesting for the delivery of encapsulated therapeutics to targeted tumors and inflamed tissues. We have previously demonstrated that temperature-responsive poly(N-vinylcaprolactam) (PVCL)-b-poly(dimethylsiloxane) (PDMS)-b-PVCL polymersomes exhibit high loading efficiency of anticancer therapeutics in physiological conditions. However, the in-vivo toxicity of these polymersomes as biocompatible materials has not yet been explored. Nevertheless, developing an advanced therapeutic nanocarrier must provide the knowledge of possible risks from the material’s toxicity to support its future clinical research in humans. Herein, we studied pH-induced degradation of PVCL₁₀-b-PDMS₆₅-b-PVCL₁₀ vesicles in-situ and their dually (pH- and temperature-) responsive release of the anticancer drug, doxorubicin, using NMR, DLS, TEM, and absorbance spectroscopy. The toxic potential of the polymersomes was evaluated in-vivo by intravenous injection (40 mg kg⁻¹ single dose) of PVCL₁₀-PDMS₆₅-PVCL₁₀ vesicles to mice. The sub-acute toxicity study (14 days) included gravimetric, histological, and hematological analyses and provided evidence for good biocompatibility and non-toxicity of the biomaterial. These results show the potential of these vesicles to be used in clinical research.     

熔融纺丝制备中空纤维膜研究进展

中空纤维膜作为一种重要的分离膜材料,其制备方法一直以来是膜技术研究领域的热点。相对于溶液法纺丝制膜方法而言,熔融纺丝法具有使用溶剂量少、环境友好、所得中空纤维膜力学性能较优等特点,已成为目前中空纤维膜制备的重要技术之一。本文根据工艺将熔融纺丝制膜方法区分为熔融纺丝-拉伸法和热致相分离法,分别就这两种方法中空纤维膜的制备技术及致孔机理进行介绍,并对二者的研究历史及现状进行了论述,最后,还指出了熔融纺丝制备中空纤维膜研究领域有待解决的问题。     

Spatial donor/acceptor architecture for intramolecular charge-transfer emitter

Charge transfer via electron hopping from an electron donor (D) to an acceptor (A) in nanoscale, plays a crucial role in optoelectronic materials, such as organic light-emitting diodes (OLEDs) and organic photovoltaic cells (OPVs). Here, we propose a strategy for binding D/A units in space, where intramolecular charge-transfer can take place. The resulted material DM-Me-B is able to give bright emission in this molecular architecture because of the good control of D/A interaction and conformational rigidity. Moreover, DM-Me-B presents small singlet-triplet splitting energy, enabling thermally activated delayed fluorescence. Therefore, the DM-Me-B exhibits ～20% maximum external quantum efficiency and low efficiency roll-off at 1000 cd/m², certifying an effective strategy in controlling D/A blocks through space.     

玻璃芯片上温控微阀的制备和微流体控制性能研究

聚N-异丙基丙烯酰胺(PNIPAAm)在临界温度(32 ℃)附近会发生敏锐的相变, 导致其体积和表面亲疏水性的突变. 利用这种由温度刺激引起的体积变化, 可以控制微通道内微流体的运动状态. 本文以2-羟基-2-甲基-1-苯基丙酮为引发剂, 水-乙醇混合体系为溶剂, 在玻璃芯片通道内局部区域以紫外光诱导聚合PNIPAAm整体柱塞, 制备温控微阀. 系统地考察了聚合条件对该阀的形态和性能的影响. 在此基础上, 建立了一个芯片上的集成化单温控阀流动注射分析模型, 利用镁离子与荧光探针O,O'-二羟基偶氮苯的螯合荧光反应, 表征温控微阀的控流效果. 结果表明, 所制作的微阀温控效果良好, 在微流控领域有应用前景.