Phasenverhältnisse der Selenate im Dreistoffsystem Tl2O3-SeO3-H2O bei 100°C

Summary The solubility of the system Tl₂O₃-SeO₃-H₂O was studied at 100°C. The compounds obtained were subjected to X-ray and thermal analysis. The symmetry and the crystallographic constants of some of the compounds were determined.

     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

配合物聚合反应研究──Ⅱ．以二氨基磺磷酸盐配合物合成聚脲

以二氨基磺酸盐配合物合成了一系列主链上合金属元素（Ｃａ，Ｎｉ，Ｃｏ，Ｃｕ）的聚脲聚合物．用ＩＲ和１ＨＮＭＲ对其结构进行了表征，以ＴＧ－ＤＴＡ研究了其热性能，并讨论了金属元素种类及其含量对聚脲聚合物溶液粘度的影响．     

Characterization of OV-1/FFAP-mixture coated glass capillary columns used for the separation of free fatty acids

As an alternative to acid pretreated UCON and FFAP capillaries for the analysis of wide-boiling free fatty acid mixtures, OV-1 : FFAP phase mixtures were used on high-temperature silylated inert glass capillary columns. The HETP-carrier gas velocity curves, peak asymmetry factors, coating efficiency, gas phase and stationary phase contributions to the mass transfer resistance were determined for various OV-1 : FFAP ratios. Mixed-phase capillaries showed optimum performance at a 2 : 1 OV-1 : FFAP ratio. The thermal and long-term stability of OV-1-stabilized FFAP columns surpassed those of the UCON and pure FFAP reference column used.     

Coupling of thermal desorption in modified closeable sampling columns with wide-bore capillary gas chromatography and mass spectrometric detection

In contrast to usability of Curie-point pyrolysis at 700°C directly attached to gas chromatography-mass spectrometry (GC-MS) for determination of organic wood preservatives in waste wood samples the investigation method reported here consists of thermal desorption at temperatures about 260°C in connection with GC-MS for peak identification or GC with flame ionization detection for quantitative analyses. So-called “modified closeable sampling columns” are used as batch-reactor in thermal desorption experiments. Desorbed vapours can be introduced on capillary columns without sample discrimination and without a disturbing lost of resolution. In this manner a lot of individual polycyclic aromatic hydrocarbons were determinated in waste wood samples, especially in railway sleepers.     

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

Chemical and thermal analysis of the biopolymers in thyme (Thymus vulgaris)

Thyme (Thymus vulgaris) has been known, long time ago, for its aromatic properties. It contains essential oils and polymers such as cellulose (mixture of hemicellulose and cellulose) and lignin. The thyme, studied in this work, was gathered from the same place, in the period from November 1999 to October 2000. The chemical analysis (water, total ash, essential oils, extractive substances, cellulose, holocellulose and lignin) can be used roughly in the characterisation of the four periods that correspond to the four seasons of the year. The cellulose level was found to be more than lignin level in the wet periods (growth of the plant). The opposite was found in the dry periods. The total ash and essential oil levels were found to be high during the period of high pluviometry. The thermal decomposition of cellulose and holocellulose was found to fit well with the first-order kinetics. The activation energy, under air flow, was 185 and 196 kJ mol⁻¹ for cellulose and holocellulose, respectively. The maximum decomposition rate and thermal analysis heating rate of lignin were found to have a direct linear relationship.     

Heat transfer in polymer composites filled with inorganic hollow micro-spheres: A theoretical model

The heat transfer mechanisms in inorganic hollow micro-spheres filled polymer composites are analyzed in the present paper. This heat transfer includes mainly three mechanisms: (1) thermal conduction between solid and gas; (2) thermal radiation between the hollow micro-sphere surfaces; and (3) natural thermal convection of the gas in the micro-hollow spheres. A theoretical model of heat transfer in polymer/inorganic hollow micro-sphere composites is established based on the law of minimal thermal resistance and the equal law of the specific equivalent thermal conductivity, and a corresponding equation of effective thermal conductivity is derived. The effective thermal conductivity (k_eff) of hollow glass bead-filled polypropylene composites is estimated by using this equation, and is compared with the numerical simulations by means of a finite element method. The results show that the variation of the theoretical estimations of k_eff are similar to the numerical simulations at lower filler volume fraction (φ_f20%). Moreover, k_eff decreases linearly with increasing φ_f, and reduces somewhat with increase of filler size.     

用色谱-质谱和质量色谱研究苯甲酸钐热分解反应

为合成某些芳香族有机化合物提供一种新途径，用色谱－质谱联用技术和质量色谱法研究了苯甲酸钐的热分解反应产物。其热分解产物溶入丙酮后有大量９，１０－蒽醌析出，其丙酮溶液中还含有１，２－二苯甲酰基苯（２５６％）、苯甲酸（１８７％）、二苯酮（１４４％）、９－芴酮（８２％）、９－苯基芴（４９％）、联苯（３６％）、二苯甲烷（２３％）、３－甲酰苯基联苯（２１％）、二苯基乙二酮（１９％）、４－甲酰苯基联苯（１８％）、芴（１７％）、ｍ－二苯甲酰基苯（１１％）和ｐ－二苯甲酰基苯（０２％）等５５种化合物。讨论了苯甲酸盐的热分解反应机理。     

拉伸热历史对取向聚对苯二甲酸乙二酯膜在热处理过程中收缩和伸长的影响

弄清取向非晶态聚合物在热处理过程中的收缩和伸长的变化规律,以及所对应的结构变化,有较大的实用意义和科学意义。 对于取向聚对苯二甲酸乙二酯的热收缩和热伸长已有很多研究,但对于拉伸热历史对取向PET在热处理过程中的尺寸变化的影响尚缺乏系统的研究。在热拉伸的过程中发生分子链的取向、热弛豫和结晶三个相互竞争的过程。因此,改变拉伸条件可以得到具有各种不同取向和结晶的PET试样。当非晶态PET膜片在80-105℃以较低