A simultaneous TG–DTA study of the thermal decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester (salsalate)

Simultaneous thermogravimetry–differential thermal analysis (TG–DTA) and gas and liquid chromatography with mass spectrometry detection have been used to study the kinetics and decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester, commercially known as salsalate. Samples of salsalate were heated in the TG–DTA apparatus in an inert atmosphere (100 ml min⁻¹ nitrogen) in the temperature range 30–500 °C. The data indicated that the decomposition of salsalate is a two-stage process. The first decomposition stage (150–250 °C) had a best fit with second-order kinetics with E_a=191–198 kJ/mol. The second decomposition stage (300–400 °C) is described as a zero-order process with E_a=72–80 kJ/mol. The products of the decomposition were investigated in two ways:

(a)Salsalate was heated in a gas chromatograph at various isothermal temperatures in the range 150–280 °C, and the exit gas stream analyzed by mass spectrometry (GC–MS). This approach suggested that salsalate decomposes with the formation of salicylic acid, phenol, phenyl salicylate, and cyclic oligomers of salicylic acid di- and tri-salicylides.

(b)One gram samples of salsalate were heated in a vessel under nitrogen to 150 °C, and the residues were analyzed by liquid chromatography–mass spectrometry (LC–MS). The major compound detected was a linear tetrameric salicylate ester.

     

Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

On laplace continued fraction for the normal integral

The Laplace continued fraction is derived through a power series. It provides both upper bounds and lower bounds of the normal tail probability % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqefm0B1jxALjhiov2D% aebbfv3ySLgzGueE0jxyaibaiGc9yrFr0xXdbba91rFfpec8Eeeu0x% Xdbba9frFj0-OqFfea0dXdd9vqaq-JfrVkFHe9pgea0dXdar-Jb9hs% 0dXdbPYxe9vr0-vr0-vqpWqaaeaabiGaciaacaqabeaadaqaaqGaaO% qaaiqbfA6agzaaraaaaa!3DC0!\[\bar \Phi\](x), it is simple, it converges for x>0, and it is by far the best approximation for x3. The Laplace continued fraction is rederived as an extreme case of admissible bounds of the Mills' ratio, % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqefm0B1jxALjhiov2D% aebbfv3ySLgzGueE0jxyaibaiGc9yrFr0xXdbba91rFfpec8Eeeu0x% Xdbba9frFj0-OqFfea0dXdd9vqaq-JfrVkFHe9pgea0dXdar-Jb9hs% 0dXdbPYxe9vr0-vr0-vqpWqaaeaabiGaciaacaqabeaadaqaaqGaaO% qaaiqbfA6agzaaraaaaa!3DC0!\[\bar \Phi\](x)/(x), in the family of ratios of two polynomials subject to a monotone decreasing absolute error. However, it is not optimal at any finite x. Convergence at the origin and local optimality of a subclass of admissible bounds are investigated. A modified continued fraction is proposed. It is the sharpest tail bound of the Mills' ratio, it has a satisfactory convergence rate for x1 and it is recommended for the entire range of x if a maximum absolute error of 10^-4 is required.The efforts of the author were supported by the NSERC of Canada.     

Synthesis, Structure and Conductivity of the New Charge-transfer Salt (ET)_2(CH_2=CH-CH_2-SO_3)·H_2O

ET is one of the most famous electron-donor molecules, which forms charge-transfer complexes (abbr. CT-complexes) with various types of counterions. These complexes have received intense attention because a wide range of physical properties such as conductivity and superconductivity1, ferromagnetism2-4 and nonlinear optical properties5 was found in these materials. Although the majority of the ET-based CT-complexes were prepared by combining with inorganic counterions, CT-complexes with o…     

Use of a Dual-Marker Form of Analysis to Estimate Binding Constants Between Receptors and Ligands by Affinity Capillary Electrophoresis

This work describes the use of a dual-standard analysis approach termed the time-average ratio (TAR) in affinity capillary electrophoresis (ACE) to estimate binding constants of receptors to ligands. In this form of analysis the TAR is the migration time of the receptor divided by the average of the sum of the migration times of two non-interacting standards. This change in TAR as a function of the concentration of ligand yields a value for the binding constant. This concept is demonstrated using three model systems: carbonic anhydrase B (CAB, EC 4.2.1.1) and arylsulfonamides, vancomycin (Van) and ristocetin (Rist) from Streptomyces orientalis and Nocardia lurida, respectively, and d-Ala- d-Ala terminus peptides. Three ACE techniques are used to examine the three systems: standard ACE, flow-through partial-filling ACE (FTPFACE), and on-column derivatization coupled to ACE. The findings described here demonstrate that ACE data analyzed using the TAR form of analysis yield binding constants between receptors and ligands comparable to those estimated using other ACE forms of analysis. A comparison to three other forms of analysis is described.     

用电子散斑干涉法测量材料热膨胀系数

 利用双光束电子散斑干涉法（ESPI）对试件受热变形进行了实时观测，针对一次实验过程中得到的图片较多（300～500幅）的特点，在图像处理时摒弃了以往的手动识别等位移线的办法，用MATLAB语言编写了批处理程序，能够在采集的大量散斑图片中自动快速准确地标定等位移线，得到相应的位移和应变，并结合实时测量的温度值，获得了45钢和LY12铝合金在不同温升率下的热膨胀系数及其随温度的变化。实验结果表明，在涉及的温升率范围内，温升率的改变对材料热膨胀系数的影响不明显，材料的热膨胀系数随温度的升高略有上升。     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

微波大气吸收衰减特性分析及分层数值算法

 给出了微波在大气中传输受气体分子吸收导致衰减的较精确计算模型，该模型扩展了传统计算模式忽略温度、湿度、压力变化及传播距离受限制的近似算法。结合我国某地区的实测气象数据模拟计算了该地区的大气吸收衰减，最后根据数值计算结果分析了微波随频率、发射角度以及月份（季度）变化的传播特性，并简要说明了此研究在微波遥感中的实际意义。     

高温高压下β相硼的电导率测量

 硼在高压下具有复杂的结构和多样的物理性质,对其结构和性质的深入研究具有很重要的意义,一直引起理论和实验研究领域的关注。高压下进行电学性质测量是获得物质物理性质的有效手段,利用集成在金刚石对顶砧上的微电路,在高压下和两个不同温度范围内对β相硼进行了电导率测量,分析了导电机制随压力的变化规律。在0～28.1 GPa范围内,β相硼的电导率随着压力的增大是逐渐增大的,卸压后样品的电导率不能回到最初的状态,是一个不可逆的变化过程;由室温到423 K的范围内,β硼的电导率随着温度的不断增加有明显的上升趋势,并且随着压力的升高,电导率变化逐渐加快。此外,对样品在14.5 GPa和18.6 GPa压力下,用溅射到金刚石对顶砧上的氧化铝薄膜做绝热层,对样品进行了激光加热实验,最高温度达到2 224 K,电导率随着温度的上升而增大,结果显示,β相硼的电学特征仍然属于半导体的特征范围内。     

空间摄像机的热设计

根据空间摄像机的所处空间环境和结构特点,对其进行了热设计.采用被动热控措施进行热隔离和热疏导,充分利用了摄像机所搭载的卫星平台的热容;采用主动热控措施进行温差补偿,将温度拉平至热控指标范围之内.根据所采用的热控措施,针对空间摄像机进行了仿真分析,得到了满意的结果.