A molecular beam mass spectrometry system for in situ measurement of the concentration of gas phase species including radicals impinging on a substrate during thermal plasma chemical vapor deposition (TPCVD) has been designed and constructed. Dynamically controlled substrate temperature was achieved using a variable thermal contact resistance method via a backside flow of an argon/helium mixture. A high quality molecular beam with beamtobackground signal greater than 20 was obtained under film growth conditions by sampling through a small nozzle (75 m) in the center of the substrate. Mass discrimination effects were accounted for in order to quantify the species measurements. We demonstrate that this system has a minimum detection limit of under 100 ppb. Quantitative measurements of hydrocarbon species (H, H2, C, CH3, CH4, C2H2, C2H4) using Ar/H2/CH4 mixtures and silicon species (Si, SiH, SiH2, SiCl, SiCl2, Cl, HCl) using Ar/H2/SiCl4 mixtures were obtained under thermal plasma chemical vapor deposition conditions. 相似文献
In the present study was combined the use of high resolution TGA with the isoconversion method, giving us a suitable methodology for determining the stages that occur during a reaction, and providing further insights about the kinetics of the processes involved. As a model reaction was used the thermal dehydration of KNbWO6·H2O. The results shown that the dehydration process is controlled by internal water diffusion (intra-crystallite); with activation energy values between 43 and 36 kJ/mol. This value is consistent with a diffusion mechanism dominated by van der Waals attractions. The estimated kinetic parameters are supported with a structural analysis, that suggest lower dimensionality character for water diffusion due to the specific orientations of 〈1 1 0〉 open channels in the pyrochlore framework. This would explain why the two-dimensional (D2) mechanism appears to be the most probable. 相似文献
In this paper, perovskite oxide SmCoO3 was prepared by the solid-state reaction method using Co2O3 and Sm2O3 as raw materials. The structure and properties of the samples were investigated by XRD, Raman spectral techniques, and DC
measurements and so on. The results of XRD and Raman spectra showed that the mixtures of Co2O3 and Sm2O3 can react to produce a single phase perovskite oxide SmCoO3 around 1353 K. The single-phase SmCoO3 changes from an insulator to a semi-conductor and transition occurs around 470 K. The thermal expansion coefficient (2.17
× 10−5 K−1) of the single-phase SmCoO3 is approximately equal to that of doped LaGaO3, but much bigger than that of SDC(Ce0.85Sm0.15O2) above 873 K. 相似文献
In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)Ll and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.
The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), 1H-NMR, 13C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)Ll polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L1 homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements. 相似文献
The change in semiconductive properties of β-apo-8′-carotenal, astacene and methyl bixin on adsorption of various vapours
on the crystallite surfaces has been studied at a constant sample temperature. The adsorption of vapours enhances the semiconductivity
of the polyenes appreciably. This enhancement depends on the chemical nature and also on the pressure of the adsorbed vapour.
The adsorption and desorption kinetics follow the modified Roginsky-Zeldovich relation. A two stage desorption process, the
first stage of which gives a Lennard-Jones potential energy curve and is followed by a rate-determining transition over a
potential energy barrier to the second stage of adsorption forming weakly bound complexes between the vapour molecules and
the polyene crystallites, can explain satisfactorily the experimentally observed kinetic data. 相似文献
A model is developed for thermal degradation of polymer nanocomposites. A composite is thought of as an equivalent network of linear chains with attached side-groups. Thermal degradation is treated as combination of (i) binary scission (fragmentation) of backbone chains, and (ii) detachment of side-groups and their subsequent annihilation (diffusion to the surface of a sample and desorption). An explicit solution is derived for the kinetic equation. This solution involves three adjustable parameters that are found by fitting observations on isotactic polypropylene reinforced with carbon nanofibres. Good agreement is demonstrated between the experimental data and the results of numerical simulation. 相似文献
The storage stability of the occupationally frequently occurring compounds, methylethylketone, methylisobutylketone, benzene, toluene, tetrachloroethylene, n-butylacetate, -pinene, β-pinene, limonene and n-decane, has been investigated on the adsorbents Tenax TA, Chromosorb 106 and Carbotrap using thermally desorbable tube type samplers, commonly utilized in ambient and workroom atmospheric measurements. Fifty and 500 ng of each compound were loaded on the various adsorbents tubes, stored at both ambient (20 °C) and refrigerated (4 °C) temperatures and analysed by means of thermal gas chromatography with mass spectrometric detection on days 0, 7, 14 and 28 after exposure. A 90% storage recovery was chosen as acceptance criteria for storage stability, and statistical testing by Student's t-test, analysis of variance and Bonferroni post hoc tests were employed to investigate the effect of the categorical variables storage time, storage temperature and analyte loading on the different adsorbents. Chromosorb 106 showed the overall best behaviour with recoveries of 90% or better for all analytes during the 28-day test period. Tenax TA and Carbotrap yielded lower recoveries and were more influenced by variations in storage time, storage temperature and analyte loading. Refrigerated temperatures were best avoided for storage on Tenax TA, but may increase the recovery of some compounds on Carbotrap (e.g. n-butylacetate). The blank build-up on the adsorbents was also investigated, and Carbotrap and Tenax TA showed no signs of artefact development over time. Chromosorb 106, however, contained inherently more artefacts that build up over time, which in spite of the excellent storage capability, may limit its use in field studies where long storage times are normal. 相似文献
The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li1.125Ta0.875Zr0.125SiO5 solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44×10-5 S/cm at 30℃ can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V(vs. Li+/Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO4 cathode can deliver the initial discharge capacity of ca. 154 mA·h/g at 0.1 C and the reversible capacity of ca. 132 mA·h/g after 70 cycles with high Coulombic efficiency of 99.5% at 55℃. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties. 相似文献