Defect detection and evaluation of ultrasonic infrared thermography for aerospace CFRP composites

The ultrasonic infrared thermography Non-destructive Testing is introduced for detecting the impact damage of a CFRP specimen for Unmanned Aerial Vehicles. The characteristics of thermal images with damage are particularly analyzed. A Local Binary Fitting (LBF) model based on a non-Gaussian kernel function is used to segment the defect edge. In view of the discontinuity of defect in thermal images due to multilayered structure of composite materials, defect merging algorithms are proposed including time domain and space domain methods by using a few thermal images, and the defect geometric distortion during camera imaging is also compensated. The defect in the composite material can be quantitatively analyzed after the defect reconstruction. The experimental result has shown that the proposed algorithm can effectively detect and evaluate the impact damage of thermal images and the accuracy of quantitative assessment is correspondingly increased.     

一种飞行器电气系统综合测试平台设计

为解决传统飞行器电气系统综合测试中存在的测试设备种类繁多、测试项目覆盖性差等诸多问题,在某飞行器测试覆盖能力改进项目中,提出一种基于PXI总线架构的综合测试平台设计思路,通过模块化的硬件与软件架构设计,完成飞行器电气系统的综合测试平台设计,并结合实际测试需求进行具体开发,实践表明该系统能够保证飞行器现场测试有序、规范、安全。     

基于PID控制的空调器性能测试装置研制

介绍了PID控制技术在空调器性能测试室内温湿度控制中的应用,设计了一个空调器性能测试系统,并基于VB编程技术,在Win2000/WinXP操作系统上,开发了系统数据采集,显示数据处理功能的测控系统。试验证明,该系统稳定、可靠,能满足国家标准的规定。     

手机USB数据线测试仪的研制

针对企业生产手机USB数据线时需要进行性能测试方面的要求,设计出一款以FPGA为处理核心,USB接口芯片为控制对象,辅之电源、存储器、键盘、显示、静电保护和反馈输出接口等模块组成的手机USB数据线测试仪。该测试仪按照USB通信协议把USB数据包通过被测数据线进行传输,然后通过计算其传输USB数据包的错误率来判断数据线性能的质量好坏。通过与误码率分析仪、电脑海量传输实测的结果对比和实际应用表明,该仪器较其它测试方法具有测试速度快,测试结果准确等优点,可广泛地应用于USB数据线生产企业。     

光电经纬仪的跟踪误差及其检测

本文开头指出了跟踪性能是光电经纬仪第一重要技术指标，接着叙述了跟踪原理和跟踪误差的检测方法，并对跟踪误差进行了较深入的分析讨论文章最后，将跟踪误差分门别类，介绍了降低跟踪误差，提高跟踪性能的途径。     

激光干扰扩束系统光机结构设计

针对常规红外干扰技术存在的能量无法集中、隐蔽性差且无法进行变倍切换等实际问题,提出一种离轴双反射式激光干扰扩束系统的设计方案,并对离轴双反射镜组,转向平面反射镜及支撑固定机构等主要组成部分进行了光机结构设计.为实现扩束比的变倍切换功能,采用新型离轴副镜组件设计;为减小镜面变形,离轴主副镜组均采用微应力设计.分析结果表明,在-20~+60℃温度范围内,主副镜组轴向最大位移小于等于0.01mm,主副镜组的反射镜面形误差小于等于71.9nm;系统一阶固有频率108.3Hz,其支撑结构应力响应远小于材料的屈服极限.实际测试发现,系统可实现1:10.02(19.92,25.02)扩束比,满足设计技术指标要求.分析及试验结果表明,系统光机结构设计合理,完全满足实际应用要求.     

基于超声相控阵的环焊缝缺陷检测方法研究

针对传统超声探头焦距固定,检测位置的改变就要更换相应焦距的探头而影响检测效率的问题,提出一种基于超声相控阵换能器的环焊缝缺陷检测方法。而超声相控阵具有电子偏转和电子聚焦特性,能在不移动的情况下发射偏转聚焦超声束,有效地解决了上述问题。首先基于超声相控线阵换能器的声场特点,采用数值分析方法,研究了影响声束偏转聚焦性能的几个主要参数。然后给出了与超声相控阵换能器相连接的多通道数据采集系统结构。介绍了单通道声信号的硬件结构及相应的信号处理方法,实现了对换能器中单个阵元的精确延时的控制。实验结果表明,优化设计的超声相控线阵换能器具有较高的检测精度和检测效率。     

Prediction of trafficability for tracked vehicle on broken soil: real size tests

Full-scale tests were carried out within the broader framework of a study of an operational mechanical mine clearance system. This system is made up of a tracked machine pushing a mine clearance plow that scarifies the soil to approximately 30 cm depth. This study examines the capacity of the tractor to move on a disturbed soil. This paper presents motion resistance tests and drawbar pull tests on four types of soil. The soils have been chosen to be scientifically representative of the broad distribution on our planet: a sand (frictional soil), a silt (cohesive soil), a silty gravel (coarse-grained soil), and a silty sand (cohesive soil). The tests are performed in two configurations: on compacted soils and on soils scarified with an experimental plow. The results of each test condition are described. The effects of the soil type, its state, and the speed of the tested vehicle are presented. Using these results and, in addition, full-scale tests of scarification, we present an operational analysis determining the mobility of a tracked vehicle on broken soil. This method makes it possible to calculate the maximum speed of a mechanical mine clearance system for the whole range of soils tested.     

线性模型中自相关的经验似然比检验

研究线性回归模型中的自相关检验问题,用经验似然的方法构造检验统计量,得到了零假设下检验统计量的渐近分布,我们的检验方法不但可以检验一阶自相关,也可以检验高阶自相关,数值模拟表明检验方法具有良好的检验功效.     

Testing for forbidden order patterns in an array

A sequence contains a pattern , that is, a permutations of [k], iff there are indices i₁ < … < i_k, such that f(i_x) > f(i_y) whenever π(x) > π(y). Otherwise, f is π‐free. We study the property testing problem of distinguishing, for a fixed π, between π‐free sequences and the sequences which differ from any π‐free sequence in more than ? n places. Our main findings are as follows: (1) For monotone patterns, that is, π = (k,k ? 1,…,1) and π = (1,2,…,k), there exists a nonadaptive one‐sided error ?‐test of query complexity. For any other π, any nonadaptive one‐sided error test requires queries. The latter lower‐bound is tight for π = (1,3,2). For specific it can be strengthened to Ω(n^{1 ? 2/(k + 1)}). The general case upper‐bound is O(?^?1/kn^{1 ? 1/k}). (2) For adaptive testing the situation is quite different. In particular, for any there exists an adaptive ?‐tester of query complexity.