手机USB数据线测试仪的研制

针对企业生产手机USB数据线时需要进行性能测试方面的要求,设计出一款以FPGA为处理核心,USB接口芯片为控制对象,辅之电源、存储器、键盘、显示、静电保护和反馈输出接口等模块组成的手机USB数据线测试仪。该测试仪按照USB通信协议把USB数据包通过被测数据线进行传输,然后通过计算其传输USB数据包的错误率来判断数据线性能的质量好坏。通过与误码率分析仪、电脑海量传输实测的结果对比和实际应用表明,该仪器较其它测试方法具有测试速度快,测试结果准确等优点,可广泛地应用于USB数据线生产企业。     

基于超声相控阵的环焊缝缺陷检测方法研究

针对传统超声探头焦距固定,检测位置的改变就要更换相应焦距的探头而影响检测效率的问题,提出一种基于超声相控阵换能器的环焊缝缺陷检测方法。而超声相控阵具有电子偏转和电子聚焦特性,能在不移动的情况下发射偏转聚焦超声束,有效地解决了上述问题。首先基于超声相控线阵换能器的声场特点,采用数值分析方法,研究了影响声束偏转聚焦性能的几个主要参数。然后给出了与超声相控阵换能器相连接的多通道数据采集系统结构。介绍了单通道声信号的硬件结构及相应的信号处理方法,实现了对换能器中单个阵元的精确延时的控制。实验结果表明,优化设计的超声相控线阵换能器具有较高的检测精度和检测效率。     

On the computational utility of posynomial geometric programming solution methods

Ten codes or code variants were used to solve the five equivalent posynomial GP problem formulations. Four of these codes were general NLP codes; six were specialized GP codes. A total of forty-two test problems was solved with up to twenty randomly generated starting points per problem. The convex primal formulation is shown to be intrinsically easiest to solve. The general purpose GRG code called OPT appears to be the most efficient code for GP problem solution. The reputed superiority of the specialized GP codes GGP and GPKTC appears to be largely due to the fact that these codes solve the convex primal formulation. The dual approaches are only likely to be competitive for small degree of difficulty, tightly constrained problems.     

实验室熟练水平测试方案简介

介绍了实验室熟练水平测试方案(LPTS)的目的,类型,以及实验室熟练水平测试的组织、基本运行程序和实施的具体步骤。     

The effect of testing equipment shift on optimal decisions in a repetitive testing process

Repetitive testing process is commonly used in the final testing stage of semiconductor manufacturing to ensure high outgoing product quality and to reduce testing errors. The decision on testing lot size and the number of testing repetitions ultimately determines the effectiveness of the testing process. Setting the retest rule is often difficult in practice due to uncertainties in the incoming product quality and testing equipment condition. In this paper, we study a repetitive testing process where the testing equipment may shift randomly to an inferior state. We develop a cost model that helps us to make optimal decisions on retesting rule. Through numerical analysis, we provide practical insights about the effects of testing equipment shift rate, testing errors, and different costs such as cost of testing and cost of rejecting conforming products on the optimal decision and the system performance. We find that significant penalty may result if the potential testing equipment shift is ignored.     

Systematic design and development of a flexible wheel for low mass lunar rover

Low mass compact rovers provide cost effective means to explore extra-terrestrial terrains. Use of flexible wheels in such applications where the wheel size is restricted, improves traction at reduced slip and sinkage. Design of a flexible wheel for a given mission is a challenging task requiring consideration of stiffness of rim and spokes, stress induced in the wheel, chassis movement during wheel rotation and the operating mode of the wheel. Also, accurate mathematical models are required to save design and development time and reduce the number of prototypes for selection. It is observed that most of the research papers deal with performance testing of flexible wheels and information on analytical formulation is scarce. Therefore, in the present work, a methodology has been formulated to systematically design a flexible wheel for a low mass lunar rover. The prototype performance is tested and compared with analytical estimates and reasons for difference are investigated. Paper contains details of design criteria, mathematical modelling, realisation of wheel prototype, test fixture and analysis test comparison. Authors believe that this work provides a useful aid to the designer to systematically design flexible wheels for low mass lunar rovers.     

Delamination detection by Multi-Level Wavelet Processing of Continuous Scanning Laser Doppler Vibrometry data

A novel non-destructive testing procedure for delamination detection based on the exploitation of the simultaneous time and spatial sampling provided by Continuous Scanning Laser Doppler Vibrometry (CSLDV) and the feature extraction capability of Multi-Level wavelet-based processing is presented in this paper. The processing procedure consists in a multi-step approach. Once the optimal mother-wavelet is selected as the one maximizing the Energy to Shannon Entropy Ratio criterion among the mother-wavelet space, a pruning operation aiming at identifying the best combination of nodes inside the full-binary tree given by Wavelet Packet Decomposition (WPD) is performed. The pruning algorithm exploits, in double step way, a measure of the randomness of the point pattern distribution on the damage map space with an analysis of the energy concentration of the wavelet coefficients on those nodes provided by the first pruning operation. A combination of the point pattern distributions provided by each node of the ensemble node set from the pruning algorithm allows for setting a Damage Reliability Index associated to the final damage map. The effectiveness of the whole approach is proven on both simulated and real test cases. A sensitivity analysis related to the influence of noise on the CSLDV signal provided to the algorithm is also discussed, showing that the processing developed is robust enough to measurement noise. The method is promising: damages are well identified on different materials and for different damage-structure varieties.     

One-, two-, and three-dimensional solutions for counter-current steady-state two-phase subsurface flow

This paper derives analytical solutions for steady-state one-dimensional (1-D), two-dimensional (2-D), and three-dimensional (3-D) two-phase immiscible subsurface flow for a counter-current problem. Since the governing equations are highly nonlinear, 2-D and 3-D derivations are generally difficult to obtain. The primary purpose for the solutions is to test finite difference/volume/element computer programs for accuracy and scalability using architectures ranging from PCs to parallel high performance computers. This derivation is accomplished by first solving for the saturation of water in terms of a function that is a solution to Laplace’s equation to achieve a set of partial differential equations that allows some degree of latitude in the choice of boundary conditions. Separation of variables and Fourier series are used to obtain the final solution. The test problem consists of a rectangular block of soil where specified pressure is applied at the top and bottom of the sample, and no-flow boundary conditions are imposed on the sides. The pressure at the top of the sample is a step function that allows the testing of adaptive meshing or concentration of grid points in action zones.     

Représentativité thermique d'essais tribologiques à échelle réduiteThermal representativity of tribological reduced-scale testing

Friction behaviour is a critical factor in brake system design and performance. To describe the frictional behaviour as a function of the local conditions such as contact pressure, braking time, and sliding speed, it is more convenient to perform tribological investigations on a reduced-scale braking tribometer, if the surface thermal-loading encountered at full scale is effectively respected. Based on a discussion of scale factors, and on an analysis of heat flux and energies, various experimental conditions can be defined, respecting the same theoretical response in surface temperature. A series of simulating stop brakings from 140 km/h was conducted. It shows a very good correlation between predicted and experimental values. To cite this article: O. Roussette et al., C. R. Mecanique 331 (2003).     

线性模型中自相关的经验似然比检验

研究线性回归模型中的自相关检验问题,用经验似然的方法构造检验统计量,得到了零假设下检验统计量的渐近分布,我们的检验方法不但可以检验一阶自相关,也可以检验高阶自相关,数值模拟表明检验方法具有良好的检验功效.