Preliminary Study of Cationic Copolymerization of α-Methylstyrene and Isobutyl Vinyl Ether. II

α-Methylstyrene (α-MS) and isobutyl vinyl ether (IBVE) were copolymerized by using the H₂O/EtAlCl₂ initiator system and CH₂Cl₂ and CH₃Cl solvent in the temperature range from -30 to -90°C. As compared to homopolymerization of α-MS, both yields and molecular weights are reduced upon addition of small amounts of IBVE to the feed. The reactivity ratios were calculated by the method of Kelen and Tödös as well as the Fineman and Ross method, and the combined effect of change of solvent and temperature on reactivity ratios was determined. Effects of feed composition and temperature on the copolymer yield, composition, and number-average molecular weight M _n were studied in detail. M _n showed a novel exponential dependence on the IBVE concentration in the feed. The overall activation energies of molecular weight were determined from the Arrhenius plots for both homo-and copolymerization systems. Based on these and the yield data, a speculation is made regarding reaction mechanism for molecular weight control. NMR and DTA data are reported, which establish the random nature of the copolymers.     

Determination of Anionic Surfactants in Water

The use of ternary complexes in the determination of anionic surfactants has been investigated and an analytical method using linear alkyl sulfonates as a test substance has been developed. The method involves the formation of the chloroform-extractable bisphenanthroline Cu(II)-linear alkyl sulfonate (LAS) complex and the subsequent equilibration of the extract with erythrosine to form the extractable bisphenanthroline Cu(II)-erythrosine complex. In the equilibration step erythrosine displaces LAS quantitatively, allowing the determination of the LAS originally present by measuring the absorbance of the extracted bisphenanthroline-Cu(II)-erythrosine complex. Results are reported of studies made to determine the optimum analytical conditions, the sensitivity, and the precision for the method described.     

新一代运载火箭时序仿真系统信号完整性分析

新一代运载火箭时序仿真系统具有数字电路速度快、集成度高的特点,系统要求发出多路高精度时序、时串信号以满足新一代运载火箭地面测试设备的检查与校准需求,因此信号完整性问题在系统设计中不容忽视。针对仿真系统的典型模块(USB 3.0 Super-speed差分线、FPGA外设数据走线、时钟走线)进行建模分析仿真得出PCB硬件电路设计参数,给出时序仿真系统设计信号完整性问题的抑制和解决方法,优化了板级信号质量,改善系统可靠性、工作连续性和输出精度,可有效提高新一代运载火箭测试效率和测试可靠性。     

光静态散射测试系统的研究与实现

随着科学技术的发展,对粒子的大小、浓度及其他特性的探测已经发展成为一个专门的研究领域和现代测量学中的一个重要分支,而光散射法已经成为一种常用的粒子测量方法。为了满足应用需求,文中提出了一种基于C8051F500单片机的光静态散射测试系统方案,详细介绍了该测试系统的设计理论原理、硬件电路的设计依据、固件程序的设计思想和测试系统的具体实现。选取一定浓度的样品溶液,运用该系统进行光散射的角度依赖性测试,实际测量值与理论依据基本相符;在不同激光功率下,对同一角度的散射光强进行测试,将测量得到的数据分析,线性度良好,满足设计要求。     

Are accurate computations of the 13C′ shielding feasible at the DFT level of theory?

The goal of this study is twofold. First, to investigate the relative influence of the main structural factors affecting the computation of the ¹³C′ shielding, namely, the conformation of the residue itself and the next nearest‐neighbor effects. Second, to determine whether calculation of the ¹³C′ shielding at the density functional level of theory (DFT), with an accuracy similar to that of the ¹³C^α shielding, is feasible with the existing computational resources. The DFT calculations, carried out for a large number of possible conformations of the tripeptide Ac‐G XY ‐NMe, with different combinations of X and Y residues, enable us to conclude that the accurate computation of the ¹³C′ shielding for a given residue X depends on the: (i) (?,ψ) backbone torsional angles of X ; (ii) side‐chain conformation of X ; (iii) (?,ψ) torsional angles of Y ; and (iv) identity of residue Y . Consequently, DFT‐based quantum mechanical calculations of the ¹³C′ shielding, with all these factors taken into account, are two orders of magnitude more CPU demanding than the computation, with similar accuracy, of the ¹³C^α shielding. Despite not considering the effect of the possible hydrogen bond interaction of the carbonyl oxygen, this work contributes to our general understanding of the main structural factors affecting the accurate computation of the ¹³C′ shielding in proteins and may spur significant progress in effort to develop new validation methods for protein structures. © 2013 Wiley Periodicals, Inc.     

Development and validation of an LC–MS/MS method for the quantification of artificial sweeteners in human matrices

Artificial sweeteners are widely used as substitutes for sugar. The sweeteners are generally considered safe, however their whereabouts during pregnancy and lactation and the effect on child development are poorly explored. There is a need for new tools to measure these substances during pregnancy and lactation. Here, we describe the development and validation of a sensitive liquid chromatography–tandem mass spectrometry method for the simultaneous quantification of acesulfame, cyclamate, saccharin and sucralose in human plasma, umbilical cord blood, amniotic fluid and breast milk. The samples were prepared by protein precipitation and separated on a Luna Omega Polar C₁₈ column (2.1 × 50 mm, 1.6 μm). Electrospray ionization in negative mode and multiple reaction monitoring were used to monitor the ion transitions. The validated concentration ranges were from 1 to 500 ng/ml (10–500 ng/ml for sucralose). Interassay precisions were all ≤15% and the accuracies were within ±15%. Stability, linearity, dilution integrity, carryover and recovery were also examined and satisfied the validation criteria. Finally, this analytical method was successfully applied on spiked samples of plasma, umbilical cord blood, amniotic fluid and breast milk, proving its suitability for use in clinical studies on artificial sweeteners, including during pregnancy and lactation.     

Development of a Diamond Nanoparticles-based Nanosensor for Detection and Determination of Antiviral Drug Favipiravir

This study developed a nanosensor for the detection and determination of favipiravir, a presumed drug that has potential therapeutic efficacy in treating COVID-19 patients, from tablets and serum samples. This nanosensor was obtained by adding the optimum amount of diamond nanoparticles into carbon paste. For the determination of favipiravir adsorptive stripping differential pulse (AdSDPV) and adsorptive stripping square wave voltammetry (AdSSWV) were used. Limit of detection values were found as 4.83×10⁻⁹ M and 2.44×10⁻⁷ M for bulk and 5.18×10⁻⁸ M and 4.38×10⁻⁸ M for serum samples using AdSDPV and AdSSWV, respectively. Recovery studies made of the tablet and serum produced satisfactory results.     

Development of GC–MS/MS method for environmental monitoring of 49 pesticide residues in food commodities in Al-Rass,Al-Qassim region,Saudi Arabia

The harmful effects of pesticide residues are a threat to our health. Therefore, the current study aimed to validate a simple method for the determination of pesticide residues in commonly consumed fruits and vegetables from Al-Rass, Al-Qassim region, Saudi Arabia. A total of 1430 samples were collected from a local market and then analyzed for monitoring of 49 pesticide residues. A quick, easy, cheap, effective, rugged, and safe (QuEChERS) multi-residue extraction method followed by gas chromatography equipped with triple-quadrupole mass spectrometry (GC–MS/MS) was successfully implemented. This 17-min-run analytical method detects and quantifies pesticide residues with acceptable validation performance parameters in terms of sensitivity, selectivity, linearity, the limit of quantification, accuracy, and precision. The linear range of the calibration curves ranged from 10 to 300 µg/L, all the pesticide LODs ranged from 0.0005 to 0.0024 mg/kg, and the pesticide LOQs ranged from 0.0011 to 0.0047 mg/kg. The recovery values at the three fortification levels ranged from 78 % to 107 %, and the precision values (expressed as RSD%) were less than 20 % for all of the investigated analytes. The results showed that 138 (9.65 %) of the analyzed samples were contaminated with pesticide residues, 40 (2.80 %) of the analyzed samples exceeded the maximum residue limit (MRL) of the European Commission regulations (EC) for pesticides residues, 98 (6.85 %) of the analyzed samples were contaminated with residues below the MRL, and 1292 (90.35 %) of the analyzed samples were pesticide residue-free. Coriander contained the highest percentage (46.88 %) of pesticide residues, particularly tetradifon that representing 18.75 % noncompliance with the MRL, followed by parsley, with 20.59 % pesticide residues (10.29 % non-compliance). Multiple pesticide residues were observed most frequently in tomatoes and dates which were contaminated with buprofezin and ethion respectively.     

Advances in nucleic acid architectures for electrochemical sensing

Nucleic acid–based electrochemical sensors are ideally suited to the detection of molecular targets for which enzymatic detection or direct electrochemical oxidation – reduction reactions are not possible. Moreover, the versatility of nucleic acids in their ability to bind a great variety of target types, from small molecules to single-entity mesoscopic targets, makes them attractive receptors for the development of electrochemical biosensors. In this brief opinion piece, we discuss field advances from the past two years. We hope the works highlighted here will inspire the community to pursue creative designs enabling the detection of larger and more complex targets with a specific focus on analytical validation and translation into preclinical or clinical applications.     

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.