低温低内应力化学镀镍工艺的研究

化学镀广泛应用于非金属的电镀、电铸前的施加导电层。化学镀沉积层质量与其在零件上的附着力有着密切的关系 ,重视对化学镀沉积层内应力的研究 ,开发一个低温、低内应力的化学镀镍工艺 ,对于化学镀沉积层的推广应用有着十分重要的意义。本文采用正交实验方法对低温、低内应力化学镀镍工艺进行了系统研究 ,开发出了一个低温、低内应力的化学镀镍工艺。在实验过程中发现沉积层内应力同其在零件上的结合力具有密切关系并对其进行了初步探讨。1　实验方法1 1　正交实验根据探索性实验结果分析 ,影响化学镀镍层内应力σ和沉积层速率ｒ的主要因…     

LiCl—HOAc和LiCl—HOAc—H2O体系（25℃）相图

测定了LiCl-HOAc和LiCl-HOAc-H_2O体系25℃时的溶度,绘制了溶度图.在LiCl-HOAc体系的相图中有LiCl及LiCl·1/2HOAc2种固相,后者是固液异成分化合物,体系中未发现LiCl·5HOAc或LiCL·HOAc的生成.LiCl-HOAc-H_2O体系25℃时的相图中有3种固相,即LiCl·H_2O、LiCl和LiCl·(1/2)HOAc.相变LiCl·H_2O→LiCl→LiCl·(1/2)HOAc表明HOAc在该三元体系中具有盐溶、脱水和溶剂合3种作用.此结果提供了一种制备无水LiCl的新方法.     

Relaxometric study of copper [15]metallacrown-5 gadolinium complexes derived from alpha-aminohydroxamic acids

Proton nuclear magnetic relaxation dispersion (NMRD) profiles were recorded between 0.24 mT and 1.4 T for lanthanum(III)- and gadolinium(III)-containing [15]metallacrown-5 complexes derived from alpha-aminohydroxamic acids and with copper(II) as the ring metal. The influence of the different R-groups on the proton relaxivity was investigated, and a linear relationship between the relaxivity and the molecular mass of the metallacrown complex was found. The selectivity of the metallacrown complexes was tested by transmetalation experiments with zinc(II) ions. The crystal structure of the copper [15]metallacrown-5 gadolinium complex with glycine hydroximate ligands is reported.     

几种螯合剂解镍致小鼠胰脏毒作用比较

小鼠腹腔注射氯化镍溶液(5 mg Ni/kg)染毒，观察了N-苯甲基-D-葡糖氨基二硫代甲酸钠(BGD)、二乙氨基二硫代甲酸钠(DDTC)、二羟乙氨基二硫代甲酸钠(DHED)及meso-2，3-二巯基丁二酸钠(DMSA)等螯合剂对镍致小鼠胰脏毒性的解毒作用。镍染毒后引起小鼠胰脏胰蛋白酶活性升高和羧肽酶A活性降低以及组织中镍、钙、锌浓度增加；镍染毒30 min和24 h后进行各螯合剂治疗(剂量均为400 μmol/kg)，BGD、DDTC和DMSA可明显抑制上述变化，其中BGD解镍毒效果最好、自身毒性最小、对镍致小鼠胰脏毒性有更好的解毒作用。     

Computerized optimization of gradient elution conditions with ternary solvent mobile phases in RPLC

Summary In this work, an optimization procedure for gradient RPLC separation, using ternary mobile phases, is described. This procedure requires eight preliminary experiments in gradient elution mode to predict the retention surface for each solute over the whole triangular space. This is followed by computerized calculations to determine the best ternary gradient elution profile with respect to both selectivity and analysis time. The efficiency of this procedure from the point of view of rapidity and of accuracy, is illustrated for the specific separation of twelve phenyl urea herbicides.     

New mixed tellurides of nickel and Group 13–14 metals Ni<Subscript>3−δ</Subscript>MTe<Subscript>2</Subscript> (M = Sn,In, Ga)

Three new mixed tellurides of nickel and group 13–14 metals Ni_3−δMTe₂ (M = Sn, In, Ga) were prepared by high-temperature ampoule synthesis and studied by powder X-ray diffraction analysis. The compound Ni_3−δSnTe₂ was also studied by single crystal X-ray diffraction analysis. The structural model of this phase and two analogs was described as consisting of layers with nickel-main group metal bonds confined from the above by tellurium atoms. The van der Waals gap formed through contacts between the tellurium atoms of neighboring layers is partially occupied by nickel atoms. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1879–1881, October, 2007.     

电化学合成镍配合物的研究

采用金属镍为“牺牲”阳极，首次在无隔膜电解槽中，电化学溶解金属镍一步 制备了纳米NiO前驱体Ni(Oet)2,Ni(Obu)2,Ni(Oet)2(acac)2，Ni(Obu)2(acac)2 [acac为乙酰丙酮基].产物通过红外光谱（FT-IR）、拉曼光谱（Raman spectrum） 进行表征。同时讨论了影响电合成镍醇盐及其配合物的关键因素。实验表明，防止 阳极钝化，温度控制在30-40℃，采用有机胺溴化物为导电盐，可以提高电合成效 率。     

Die Kristallstruktur von Na2NiAlF7—ein Beitrag zum Problem der wahren Raumgruppe orthorhombischer Weberite

The Crystal Structure of Na₂NiAlF₇ — a Contribution to the Problem of the True Space Group of Orthorhombic Weberites The X-ray single crystal structure determination of the orthorhombic weberite Na₂NiAlF₇ (a = 707.4(2), b = 1003.8(2), c = 731.5(1) pm; Z = 4) was performed in space group Imma, after all reflections hk0 with h(k) = 2n + 1 could be eliminated, as they proved simulated by Renninger effect and/or λ/2 reflections. The alternative space groups Imm2 resp. I2₁2₁2₁ of former weberite structure determinations thus became obsolete. The refinement using 880 independent reflections ended at wR = 0.0232. The resulting average distances within the framework of octahedra are Ni? F = 197.3, Al? F = 180.4 pm.     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

Electrochemical reduction of cobalt and nickel complexes with ligands stabilizing metal in low oxidation state

Electrochemical reduction of cobalt(ii) complexes containing -acceptor ligands (L = bpy, Ph₂Ppy) proceeds through three consecutive reversible steps: one-electron transfer to form a more stable Co^IL complex, transfer of two electrons at more negative potentials to form an anionic [NiL]^– complex, and reduction of the ligand to the radical anion. The stability of the cobalt complexes with different ligands decreases in the series Ph₂Ppy > Ph₃P > bpy.