Syntheses and X-Ray Crystal Structures of 2-Aminoindenes and Aminocymantrenes

Substituted 2-aminoindenes have been synthesized in almost quantitative yields by reactions of amines such as methylpiperazine, trimethylethylenediamine, 1,4-diaza-cycloheptane and N,N′-dimethylethylenediamine with 2-indanone. The 2-aminoindenes can be deprotonated and reacted with BrMn(CO)₃(Py)₂ to produce the respective aminoindenyl-cymantrenes in yields between 55–70%. The X-ray crystal structures of 2-(methylpiperazine)indenyl-cymantrene 5 (P1 , a = 12.667(3) Å, b = 16.630(3) Å, c = 17.382(3) Å, α = 72.70(3)°, β = 74.59(3)°, γ = 88.66(3)°, V = 3364.1(12) Å ³, Z = 8, R1(2σ(I)) = 4.02%, wR2(2σ(I)) = 10.30%) and the HClO₄ adduct of 2-(trimethylethylenediamine)-indenyl-cymantrene 6 (Cc, a = 23.722(5) Å, b = 6.9080 Å, c = 13.264 Å, β = 111.77(3)°, V = 2018.6(7) Å 3, Z = 4, R1(2σ(I)) = 2.94%, wR2(2σ(I)) = 7.90%) were determined. In both complexes the indenyl-carbon bonded to nitrogen displays significantly longer bonds to manganese [223.5(3)–225.8(3) pm] than the other four carbon atoms [213.3(3)–219.1(3) pm]. The short indenyl-nitrogen bonds of 136.2(4) and 137.8(4) pm are indicative of a substantial multiple bond character. The complexation of Zn²⁺ by the nitrogen atoms of 6 results in significant shifts of the CO stretching frequencies.     

Ba8Cu16P30 – eine neue ternäre Variante des Clathrat I-Strukturtyps

Ba₈Cu₁₆P₃₀ – a New Ternary Variant of the Clathrate I Type Structure Ba₈Cu₁₆P₃₀ (a = 14.117(1) Å, b = 10.093(1) Å, c = 28.022(2) Å) was prepared by heating a mixture of the elements (800°C; excess of Ba and P; removal of the by-products by acetic acid/H₂O₂). The compound crystallizes orthorhombically (Pbcn; Z = 4) in a new superstructure of the cubic clathrate I type structure with an ordered distribution of the atoms. The structure is characterized by a three-dimensional framework of CuP₄ tetrahedra with cavities in the form of pentagonal dodecahedra and tetrakaidecahedra, which are occupied by the Ba atoms. The compound shows semiconduction, therefore the composition should be Ba₈Cu_15.5P_30.5.     

Investigation of the Cu-Zr-Y oxides activity in the carbon black catalytic oxidation by differential thermal analysis and temperature programmed reduction

Different copper/zirconium-yttrium catalysts have been tested in carbon black oxidation reaction. Supported mainly on differential thermal analysis and temperature programmed reduction, two different mechanisms have been proposed to explain the catalytic results. In the absence of copper, it has been shown that Zr³⁺ ions and associated anionic vacancies are responsible to the catalytic enhancement observed in the mixed oxides, oxygen species being activated on these sites. Among mixed zirconia-yttria solids, ZrO₂-5 mol%Y₂O₃ is the most active catalyst. Copper impregnation on these oxides leads to the formation of different copper species. Small particles of CuO in low interaction with the support, induce a catalytic improvement due to the highest reducibility of these species. Moreover, in order to be more efficient, CuO species should have some interactions with the support, since impregnated samples are more active than the simple mechanical mixtures.     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

Stereocontrol in Organic Synthesis Using the Diphenylphosphoryl Group

In 1959, Horner showed that metalated alkyldiphenylphosphane oxides react with aldehydes or ketones to give alkenes. With this reaction, the diphenylphosphoryl (Ph₂PO) group made its entrance into synthetic organic chemistry. In the thirty-six years since that date, extensive research has shown that this olefination, the Horner–Wittig reaction, has unique properties that make it much more than simply the phosphane oxide cousin of the more famous phosphorus-based olefinations—the Wittig reaction (based on phosphonium salts) and the Wadsworth–Emmons reaction (based on phosphonate esters). Early work on the Horner–Wittig reaction concentrated on the reactivity of phosphane oxides and the regioselectivity of their reactions, but more recently the power of the Ph₂PO group to control the stereochemistry of alkenes, and to produce “on demand” either stereoisomer in high stereochemical purity, has emerged. From the study of these stereocontrolled Horner–Wittig reactions arose the realization that the Ph₂PO group is useful not only for the control of the two-dimensional stereochemistry of alkenes, but also of three-dimensional stereochemistry in general. After a brief introduction to phosphane oxide chemistry, this review will examine the Horner–Wittig reaction, in both its original and “stereocontrolled” varieties. From there, we will move on to an account of the stereoselective construction of molecules containing the Ph₂PO group, concentrating on the stereochemical directing effects of the Ph₂PO group and on the role of its unique combination of attributes—steric bulk, electronegativity, and Lewis basicity—in controlling these reactions. Finally, we will present what is intended as a practical guide to this chemistry, covering the type of functionalized alkenes that have been made with the help of the Ph₂PO group and giving guidelines that we hope will help the organic chemist to make the most of the chemistry the Ph₂PO group has to offer.     

用水合五氧化二锑分离放射性母子体的研究─—一个新的~(201)Pb—~(201)T1发生器的制备

本文研究了无机离子交换剂—水合五氧化二锑（Sb2O5·nH2O）的制备，并用它分离了放射性母子体，制备了一个新的201Pb—201Tl放射性发生器。结果表明，末发生器具有高效、快速、简便的特点，此外还讨论了离子交换反应的机理。     

Reaction of dibenzylphosphine oxide with α,β-unsaturated O-methyloximes

The reaction of dibenzylphosphine oxide with O-methyloximes of some ,-unsaturated ketones results in the phosphorylation at the -carbon atom to form methoxyiminophosphine oxides, whereas the reaction of dibenzylphosphine oxide with O-methyloximes of ,-unsaturated aldehydes affords aminodihydrophosphole oxides.     

V2O5/TiO2 Catalytic Xerogels Raman and EPR Studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V₂O₅/TiO₂ catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm^–1 and polymeric vanadates by two broad bands in the region from 900 to 960 cm^–1 and 770 to 850 cm^–1. The Raman spectra do not exhibit characteristic peaks of crystalline V₂O₅. These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V⁴⁺ ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V⁴⁺ ions are located in sites with octahedral symmetry substituting for Ti⁴⁺ ions in the rutile structure. Magnetically interacting V⁴⁺ ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V₂O₅, a partial oxidation of V⁴⁺ to V⁵⁺ is apparent from the EPR results.     

Carvone epoxidation by system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid”: a combinatorial approach to the process optimization?

Summary Epoxidation of natural terpene (+)-carvone by the system consisting of a catalyst, oxalic acid (co-catalyst) and H₂O₂ (70% aqueous solution; oxidant) was studied and factorial design methods were applied for the optimization of this reaction. A dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L = 1,4,7-trimethyl-1,4,7-triazacyclononane) was used as a catalyst, and acetonitrile was employed as a solvent. An analysis by methods of the complete 2⁴ factorial design showed that an increase in the catalyst concentration gives a strong positive effect on the carvone conversion and selectivity. Hydrogen peroxide has a smaller positive effect on the conversion, but at high concentration, H₂O₂ leads to some decrease in the selectivity. An increase in the oxalic acid concentration has a beneficial effect on the conversion, but does not affect the selectivity.     

Reduced-size polarized basis sets for calculations of molecular electric properties. IV. First-row transition metals

Recent studies of the perturbation-dependent basis sets have indicated the possibility of a significant reduction of the size of the usual CGTO sets without considerable loss of accuracy in calculations of molecular electric properties. The resulting (ZPolX) basis sets have been developed for several atoms of the first and second row of the Periodic Table. The same method of the ZPolX basis set generation is extended for the first-row transition metals and the corresponding contracted ZPolX basis sets of the size [6s5p3d1f] are determined for both nonrelativistic and scalar relativistic calculations. The performance of the ZPolX basis sets is verified in calculations on the first-row transition metal oxides at the level of the ROHF, ROHF/CASPT2, and ROHF/CCSD(T) approximations. Also the study of the dipole polarizability of TiCl₄ confirms the excellent features of these very compact basis sets. The ZPolX basis sets for nonrelativistic and relativistic calculations of molecular electric properties are available on the web page http://www.chem.uni.torun.pl/zchk/basis-sets.html.