Ternary complexes of substituted catechols and catecholamines

Stability constants of the ternary complexes [CuAL] whereA = 5-Nitro-1,10-phenanthroline, bis(2-pyridyl) ketone (DPK) orbis(2-pyridyl)amine (DPA) andL is the dianion of catechol, tiron, protocatechic acid, pyrogallol, 1,8-dihydroxynaphthalene, catecholaldehyde, 2,3-dihydroxynaphthalene, dopamine or adrenaline have been determined by potentiometric titration in dioxane water (1:1 v/v) medium using a SCOGS computer programme. The observed trend of stability is explained on the basis of the nature of substitution over the ligands, chelate ring size and also the composition of mixed solvent in case of DPK. Structural changes in DPK have also been discussed as a function of pH, composition of medium and coordinating mode of the secondary ligand in the ternary complexes.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

聚乙烯与聚乙烯-乙丙橡胶(聚乙烯-乙丙橡胶-聚乙烯)共混物X-射线衍射谱分析

近年来将因子分析这一多变量统计分析技术成功地用于具有加和性的谱分析中。因子分析法可正确定出混合物中含有的物种(因子)数和各物种的含量(浓度),同时可将各组分的纯光谱由混合物的光谱中分离开。聚乙烯(PE)和乙丙橡胶(EPR)的二、三元嵌段共聚物(PE-EPR、PE-EPR-PE)构成的共混物结构、形态与结晶过程研究已有     

PPC/SBR并用弹性体的配方选择

利用正交法对丁苯橡胶（SBR）／聚丙撑碳酸酯（PPC）共混弹性体进行配方设计，得到了一个具有良好综合性能的配方。并通过方差分析得出PPC含量和马来酸酐（MA）用量是影响弹性体拉伸性能的最显著因素。     

剪切流动对共混物相行为影响的研究进展

介绍了国外８０年代以来开展的剪切流动对聚合物共混物相容性影响的研究概况，并着重介绍了采用最新的二维小角激光散射流变仪和光学显微流变仪对共混物体系在剪切应力作用下相行为的研究结果，反映了该前沿领域的最新进展。     

稀土丙烯酸盐与8－羟基喹啉三元固态配合物的合成与表征

稀土丙烯酸盐与８－羟基喹啉三元固态配合物的合成与表征李长正，王学智，唐宁，谭民裕（兰州大学化学系兰州７３００００）关键词：稀土，丙烯酸，８－羟基喹琳，三元配合物８－羟基喹琳因其具有优良的配位性能而被广泛应用于金属离子的分离和分析中［１］。文献中有关它...     

ATOMIC FORCE MICROSCOPY STUDIES OF POLYCAPROLACTONE RINGED SPHERULITES*

The surface morphology of free-surface PCL ringed spherulites was investigated by using atomic forcemicroscopy. The spherulites were obtained by crystallization of PCL/PVC blends of different compositions. It was found thatthe ringed spherulite exhibited regularly fluctuating rings on its surface. Compared with the bright-dark ring pattern of thespherulite under a polarizing microscope, it was proved that the optical characteristics of the ringed spherulite underpolarizing microscope coincided with its surface characteristics. The bright rings in polarizing micrographs of the spherulite coincided with the convex rings on its surface, while the dark rings coincided with the concave rings.     

Study of the α-relaxation of PVC, EVA and 50/50 EVA70/PVC blend

The dipole dynamics and α-relaxation behaviour of polyvinyl chloride PVC, poly(ethylene-co-vinyl-acetate) EVA₇₀ and blend of them EVA₇₀/PVC have been investigated by differential scanning calorimetry (DSC) and dielectric relaxation spectroscopy (DRS). The differential scanning calorimetry (DSC) thermograms measured on samples show a single glass transition in the analysed temperature range. These three polymers are wholly amorphous and pure PVC and pure EVA₇₀ are miscible in the ratio 1:1. The glass transition temperature T_g decreases significantly with presence of EVA₇₀. Furthermore, the values of apparent activation energies for molecular motions at the α-relaxation and the values of fragility index have also been determined for each sample using Moynihan expression for DSC results and Vogel-Fulcher-Tammann-Hesse (VFTH) form for DRS results. It is shown a large dependence of all the values of these parameters with the content of EVA₇₀. Comparing these three polymers, we found that the more fragile glass forming liquid is the PVC. Fragility decreases drastically with EVA₇₀ content. EVA₇₀ and EVA₇₀/PVC blend exhibit practically the same behaviour. The effect of inter- and intra-molecular interactions on fragility is discussed to explain these variations.     

Mechanical,thermal and morphological properties of poly(ε‐caprolactone)/zein blends

Blends of poly(ε‐caprolactone) (PCL) with zein (PCL/zein) in different proportions (100/0, 75/25, 50/50, 25/75 and 0/100 wt% containing 5 wt% glycerol) were compared based on their mechanical properties (tensile strength, elongation at break, and Young's modulus), and on their thermal properties, the latter determined by thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The morphology of the materials was studied by scanning electron microscopy (SEM). Blends of PCL/zein showed reduced tensile strength and elongation at break, but increased Young's modulus compared to the pure polymers, in agreement with the DMTA and SEM results. These findings indicated that PCL and zein were incompatible. TGA showed that the thermal stability was enhanced by the addition of zein to PCL, whereas SEM showed a poor interfacial interaction between the polymers. Copyright © 2004 John Wiley & Sons, Ltd.     

PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．