Spectrophotometric flow-injection determination of zinc in plant digests based on a spot test

A spot test was implemented in a flow-injection system for the spectrophotometric determination of zinc in digests of plant materials. It is based on the influence of Zn²⁺ on the oxidation rate of 1-naphthylethylenediamine (NED) by hexacyanoferrate(III) under acidic conditions. In order to control the precipitate formation and to maintain the resulting suspension, a micellar medium was established by adding Triton X-100. The proposed system handles about 65 samples per hour, meaning 72 μg NED and 9.0 mg K₃[Fe(CN)₆] per determination. Baseline drift is usually <0.01 absorbance per hour and the analytical signals for 0.5-2.5 mg l⁻¹ Zn range within ca. 0.07-0.45 absorbance. Linearity of the analytical curve is fair (r>0.999, n=6) and detection limit was estimated as 0.2 mg l⁻¹ Zn. Results are precise (R.S.D.<1%, n=10) and in agreement with flame atomic absorption spectrometry and with certified values of standard reference materials.     

Influence of mechanical properties of pectin films on charge density and charge density distribution in pectin macromolecule

The hydration and mechanical properties of citrus pectin films were examined in conditions relevant to those in the plant cell wall. The pectins used for this study varied in the degree of esterification (DE) (high or low) and charge distribution on the backbone (random or block). The hydration of the films was controlled in an osmotic pressure experiment using polyethylene glycol solutions (PEG 20000). Hysteresis tests at constant deformation rate (stress vs deformation) were used for investigating the mechanical behaviour of films. Mechanical and hydration properties of pectin films were examined as a function of charge density, charge density distribution and counterion environment—K⁺, Ca²⁺, Mg²⁺. Swelling decreased with increasing counterion concentration. The effect is stronger in the case of Ca²⁺ and Mg²⁺ for low esterified pectins and therefore crosslinks from divalent ions could be assumed. The crosslink effect is confirmed in mechanical experiments where an increase in the film tensile modulus is observed with increasing counterion concentration. It is shown for the first time that in case of highly concentrated pectin solutions Mg²⁺ cations also act as a crosslinker for pectin macromolecules.     

SHAPE MEMORY EFFECT OF PU IONOMERS WITH IONIC GROUPS ON HARD-SEGMENTS

SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） were measured with cyclic tensile test and strain recovery test. The relations between the structure and shape memory effect of these two series were studied with respect to the ionic group content and the effect of neutralization. The resulting data indicate that, with the introduction of asymmetrical extender, the stress at 100% elongation is decreased for PU non-ionomer and ionomer series, especially lowered sharply for non-ionomer series; the fixation ratio of ionomer series is not affected obviously by the ionic group content; the total recovery ratio of ionomer series is decreased greatly. After sufficient relaxation time for samples stretched beforehand, the switching temperature is raised slightly, whereas the recovery ratio measured with strain recovery test method is lowered with increased DMPA content. The characterization with FT-IR, DSC, DMA elucidated that, the ordered hard domain of the two series is disrupted with the introduction of DMPA which causes more hard segments to dissolve in soft phase; ionic groups on hard segment enhance the cohesion between hard segments especially at high ionic group content and significantly facilitate the phase separation compared with the corresponding non-ionomer at moderate ionic group content.     

Characterization of the Effects of Vanadium Traps in Cracking Catalysts by Imaging Secondary Ion Mass Spectrometry and Microactivity Test

The vanadium trapping effect of Mg and La containing additives in cracking catalyst contaminated with 2300 ppm Ni and 4700 ppm V has been analyzed by microactivity test (MAT) and imaging secondary ion mass spectrometry (SIMS). The results of SIMS imaging are consistent with cracking activity data and show that the La/spinel is a superior vanadium trap for the fluid catalytic cracking of hydrocarbons (FCC) operation. La/spinel serves as a dual function additive for both vanadium trap and SO_x removal. The optimum amount of La/spinel added to the cracking catalyst is about 15% by weight. This results in an increased catalytic activity, an increase in gasoline yield, and a decrease in coke and gas factors. The MgAl₂O₄ phase of Mg/Al₂O₃ additive is found capable of trapping vanadium while its MgO of Mg/Al₂O₃ phase can migrate to zeolite particles (the active component of the FCC catalyst) that, in turn, causes a decline in the activity of that catalyst.     

Complexation of an acrylic resin by tertiary amines: synthesis and characterisation of new binders for antifouling paints

Antifouling coatings are the most reliable way to prevent biofouling of immersed surfaces. As concerning the high toxicity of organotin paints, the tendency is the development of coatings, which do not present environmental risks. In this work, we prepare binders from modification of acrylic copolymers containing free carboxylic acid groups. Biocides chosen are tertiary ammonium salts; alkyl chain substituents with different length are considered. The chemical modifications of resins are carried out via a single step reaction. Modification extents are monitored through proton nuclear magnetic resonance and thermogravimetric analysis and the modified resins are characterised by Fourier transform infrared spectroscopy. The glass transition temperature of the acrylate systems is assessed by dynamical mechanical analysis (pin point method) and compared with data obtained by differential scanning calorimetry. The erosion and antifouling properties of the binders are followed during an exposure to marine environment by a visual observation.     

Investigation of solution and solid-state properties of poly(R,R,4,4-cyclohexylidene diphenylene diphenyl-4,4-disulfonate)

Solution and solid-state properties of poly(R,R^′,4,4^′-cyclohexylidene diphenylene diphenyl-4,4^′-disulfonate) (PS-6: R=R^′=H; PS-7: R=CH₃, R^′=H; PS-8: R=R^′=Cl; PS-9: R=CH₃, R^′=Cl and PS-10: R=R^′=Br) have been determined and discussed in terms of nature of the substituents. Ultrasonic velocity (2 MHz) and acoustical parameters of PS-7 and PS-9 solutions in chloroform, 1,2-dichloroethane and tetrahydrofuran (THF) at 30, 35 and 40 °C have been evaluated to understand the effect of methyl and chlorine groups, concentration, and temperature on molecular interactions. The data are interpreted in light of solvent-polymer and polymer-polymer interactions. Predominant solvation is observed in THF system and the least in chloroform system at all three temperatures. The structural change is observed above 2%. Both the polymers possess structure-forming tendency and it is supported by positive values of S_n.The densities of PS-7 and PS-9 determined by floatation method are in excellent agreement with calculated values but those determined by specific volume method differ remarkably from calculated values due to solvation effect. PS-7 and PS-9 possess respectively tensile strength of 38.4 and 1.1 N/mm²; electric strength of 16.2 and 25.0 kV/mm and volume resistivity of 5.7×10¹⁶ and 1.0×1017Ωcm. The low tensile strength of PS-9 is due to low molecular weight, rigid and brittle nature of the polymer chains. PS-6 to PS-9 are thermally stable up to about 349-379 °C while PS-10 up to about 279 °C and involved two-step degradation. DTA thermograms indicated T_g at about 204-226 °C. High activation energy indicated rigid nature of the polymer chains and the positive magnitudes of ΔS* indicated less ordered transition state. The nature of the substituents (CH₃, Cl and Br) affected thermal, mechanical and electrical properties.     

Benzocoumarins from the rhizomes of Juncus acutus

Investigation of the ethyl acetate extract of Juncus acutus rhizomes revealed seven benzocoumarins, probably derived from oxidation of phenanthrenes already isolated from the plant. The structures were determined by means of spectroscopic methods. The anti-algal activity of the isolated compounds tested on the green alga Pseudokirchneriella subcapitata are reported here.     

Morphology and tensile properties of glass bead filled low density polyethylene composites: MATERIAL PROPERTIES

The mechanical properties of glass bead filled low density polyethylene (LDPE) composites in tension have been investigated by using an Instron material testing machine. It is found that with increase of the glass bead weight fraction (φ) the tensile modulus (E_c) and the tensile yield stress (σ_yc) increase as a form of nonlinear function but contrary to the elongation strain at break; the correlation between E_c and φ accords with the logarithmic mixing rule and the relationship between σ_y and the volume fraction (φ_f) can be described by means of a second order equation; the effects of the glass bead diameter on the mechanical properties are not large; when φ and the bead size are suitable, the enhanced toughness effect of the filled-systems is more significant; the tensile strength of the glass bead filled system pretreated with a coupling agent are somewhat greater than those of the untreated system. In addition, the morphology of the samples is studied to explain the relationship between the micro-structure and the mechanical properties of the composites.     

Hydrophilic core-shell microspheres: a suitable support for controlled attachment of proteins and biomedical diagnostics

Functional hydrophilic microspheres (latex particles) have found various applications in life sciences and in medicine - particularly in latex diagnostic tests. This paper presents a comprehensive review of studies on latex particles with a hydrophilic interfacial layer composed of various hydrophilic polymers with reactive groups at the ends of macromolecules or at each monomeric unit along the chain. Typical examples of these hydrophilic polymers are poly(2-hydroxyethyl methyl methacrylate), poly(acrylic acid), poly(N,N-dimethylacrylamide), polysaccharides, poly(ethylene oxide) and polyglycidol. Hydrophilic microspheres with different morphologies (uniform or core-shell, see Figure) have been synthesized by emulsion and dispersion polymerizations. The chemical structure of polymers which constitute the interfacial layer of microspheres has been investigated using a variety of instrumental techniques (such as XPS, SSIMS and NMR) and analytical methods based on specific chemical reactions suitable for the determination of particular functional groups. Microspheres are exposed to contact with proteins in the majority of medical applications. This paper presents examples of studies on the attachment of these biomacromolecules to microspheres. The relation between the structure of the interfacial layer of microspheres and the ability of these particles for the covalent binding of proteins is discussed. Several examples of diagnostic tests, in which hydrophilic microspheres with adsorbed or covalently immobilized proteins were used as reagents, are presented. The paper also contains a short review of the application of magnetic hydrophilic particles for protein separation. Examples of hydrophilic latex particles used for hemoperfusion or heavy metal ion separation are presented. Hydrophilic microspheres with uniform or core-shell morphologies.     

Principle of a new immunoassay based on electrophoretic mobility of poly(styrene/alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol) microspheres: application for the determination of helicobacter pylori IgG in blood serum

The principle of a novel latex diagnostic test for the determination of antibodies against Helicobacter pylori in blood sera is described. The test is based on the measurement of the electrophoretic mobility of the microspheres with immobilized H. pylori antigens. The electrophoretic mobility of these microspheres depends on the concentration of the antibodies against H. pylori in suspending medium. Particles with hydrophilic polyglycidol in the surface layer were used for the test. The microspheres were obtained by an emulsifier-free emulsion copolymerization of styrene and alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol macromonomer (D(n) = 220 nm, diameter polydispersity factor D(w)//D(n) = 1.02). Activation of polyglycidol hydroxyl groups with cyanuric chloride allowed for covalent immobilization of H. pylori antigens. The fraction of H. pylori not specifically adsorbed onto the microspheres was negligible. Changes of the electrophoretic mobility of the microspheres with the surface concentration of the covalently immobilized H. pylori antigens Gamma = (1.6 +/- 0.3) . 10(-3) g m(-2) were suitable for the detection of the antibodies in the sera of patients with titer in the range (determined by the indirect ELISA test) from 1:500 to 1:32 000.