Small-angle x-ray scattering studies on epoxidized butadiene-styrene block copolymers

Small-angle x-ray scattering (SAXS) and scanning electron microscopy (SEM) investigations for epoxidized butadiene-styrene (BS) block copolymers were performed. For unepoxidized copolymers, the SAXS curve exhibits a maximum which indicates that the copolymer has heterogeneity domain morphology. Using the standard theory for a two-phase system, mean distances between domains, the correlation length l _p , and the thickness of the phase boundary were calculated from the SAXS data. It was found that the epoxidation of BS copolymers decreases the ability of the copolymer to separate the individual components. As the content of the epoxide groups increases, the dimensions of the domains decrease until they disappear, the boundary between domains and the matrix becomes less and less definite, and the copolymer composes a homogeneous system. The disappearance of the two-phase structure of the BS copolymers indicates an increase in the compatibility of polystyrene and epoxidized polybutadiene. According to the method of Van Krevelen, the solubility parameters of polystyrene and epoxypolybutadiene were calculated. Small differences between these parameters support the conclusions drawn from the SAXS investigations     

Thermoanalytical characterization of polyphenylacetylene: III. Use of modulated differential scanning calorimetry (MDSC)

Four polyphenylacetylene samples, synthesized using different C₆H₅OH/Mo molar ratios, were investigated thermoanalytically by modulated temperature differential scanning calorimetry (MTDSC) in order to clarify a non-reversible exothermic event observed between 473 and 523 K on normal DSC. A stepwise, non-reversible change in heat capacity suggests the presence of internal reactions within the sample, that are followed by decomposition with loss of volatile products.     

Study of a Catalytic Mechanism in Additive Differential Pulse Techniques

The new electrochemical double pulse technique, known as additive differential normal pulse voltammetry (ADNPV) when there is no restriction on the duration of both pulses, and additive differential pulse voltammetry (ADPV) when t₂?t₁, has been applied to a pseudo‐first‐order catalytic mechanism. The expressions obtained here are applicable to planar and spherical electrodes, of any radius. This is of great interest since the size of the electrode plays an important role in the preponderating of diffusive and kinetics processes. The signal obtained with this technique presents the same morphological characteristics as the triple pulse technique, double differential pulse voltammetry (DDPV) and is more advantageous than DDPV and than the double pulse one, differential pulse voltammetry (DPV).     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

Necessary and sufficient conditions for the existence of positive solutions to algebraic Riccati equations with indefinite quadratic term

Necessary and sufficient conditions are established in this paper for the existence of positive- and/or negative-definite solutions to the algebraic Riccati equation with indefinite coefficient. An iterative procedure is also given for computing such a solution.Project supported by the National Science Foundation of China and by the special program of the State Education Commission of China under grant 9033507.     

A dual-electrode approach for highly selective detection of glucose based on diffusion layer theory: experiments and simulation

A dual-electrode configuration for the highly selective detection of glucose in the diffusion layer of the substrate electrode is presented. In this approach, a glassy carbon electrode (GCE, substrate) modified with a conductive layer of glucose oxidase/Nafion/graphite (GNG) was used to create an interference-free region in its diffusion layer by electrochemical depletion of interfering electroactive species. A Pt microelectrode (tip, 5 microm in radius) was located in the diffusion layer of the GNG-modified GCE (GNG-G) with the help of scanning electrochemical microscopy. Consequently, the tip of the electrode could sense glucose selectively by detecting the amount of hydrogen peroxide (H2O2) formed from the oxidization of glucose on the glucose oxidase layer. The influences of parameters, including tip-substrate distance, substrate potential, and electrolyzing time, on the interference-removing efficiency of this dual-electrode approach have been investigated systematically. When the electrolyzing time was 30 s, the tip-substrate distance was 1.8 a (9.0 microm) (where a is the radius of the tip electrode), the potentials of the tip and substrate electrodes were 0.7 V and 0.4 V, respectively, and a mixture of ascorbic acid (0.3 mM), uric acid (0.3 mM), and 4-acetaminophen (0.3 mM) had no influence on the glucose detection. In addition, the current-time responses of the tip electrode at different tip-substrate distances in a solution containing interfering species were numerically simulated. The results from the simulation are in good agreement with the experimental data. This research provides a concept of detection in the diffusion layer of a substrate electrode, as an interference-free region, for developing novel microelectrochemical devices.     

Thermodynamique des melanges binaires LiPO3-Pb(PO3)2: Diagramme de phases et étude thermodynamique du liquide

Study of solid-liquid phase diagram of LiPO₃-Pb(PO₃)₂ binary system, in certain calcination conditions, shows the existence of several metastable phasis. When heated at a temperature of 723 K the binary mixtures lead uncompletely to a defined compound Pb₂Li(PO₃). On heating these ternary solid mixtures, three eutectic reactions have been observed: LiPO₃+Pb(PO₃)₂→Liquid at a temperature of 793 K(1) LiPO₃+Pb₂Li(PO₃)₅→Liquid at a temperature of 843 K (2) Pb₂Li(PO₃)₅+Pb(PO₃)₂→Liquid at a temperature of 891 K (3) The metastable liquid phase appears in the system at temperature of 793 K. DTA experiments performed on the binary LiPO₃-Pb(PO₃)₂ mixtures, show a superposition of two diagrams. The first one is metastable and the second represents the stable equilibrium phase diagram. Measurements of liquid enthalpy of binary LiPO₃-Pb(PO₃)₂ system at temperature of 979.65 K were reported. The corresponding values were very small and so the binary system can be considered as athermal. Assuming an ideal behaviour, the liquidus curves in the metastable diagram were calculated and the eutectic reaction (LiPO₃-Pb(PO₃)₂→Liquid) was confirmed at 793 K. This revised version was published online in August 2006 with corrections to the Cover Date.     

Differential Expression Analysis of Single-Cell RNA-Seq Data: Current Statistical Approaches and Outstanding Challenges

With the advent of single-cell RNA-sequencing (scRNA-seq), it is possible to measure the expression dynamics of genes at the single-cell level. Through scRNA-seq, a huge amount of expression data for several thousand(s) of genes over million(s) of cells are generated in a single experiment. Differential expression analysis is the primary downstream analysis of such data to identify gene markers for cell type detection and also provide inputs to other secondary analyses. Many statistical approaches for differential expression analysis have been reported in the literature. Therefore, we critically discuss the underlying statistical principles of the approaches and distinctly divide them into six major classes, i.e., generalized linear, generalized additive, Hurdle, mixture models, two-class parametric, and non-parametric approaches. We also succinctly discuss the limitations that are specific to each class of approaches, and how they are addressed by other subsequent classes of approach. A number of challenges are identified in this study that must be addressed to develop the next class of innovative approaches. Furthermore, we also emphasize the methodological challenges involved in differential expression analysis of scRNA-seq data that researchers must address to draw maximum benefit from this recent single-cell technology. This study will serve as a guide to genome researchers and experimental biologists to objectively select options for their analysis.     

The Kinetics of Formation of Microporous Polytriazine in Diphenyl Sulfone

This study highlights the value of nonisothermal kinetic methods in selecting temperature conditions for the isothermal preparation of microporous polymeric materials. A dicyanate ester is synthesized and the kinetics of its polymerization in diphenyl sulfone are studied by calorimetry under nonisothermal conditions. The kinetics are analyzed by a model-based approach, using the Kamal model, as well as by a model-free approach, using an advanced isoconversional method. Both approaches correctly predict the time to completion of polymerization at a given temperature. The material prepared independently at the predicted temperature is characterized by electron microscopy and CO₂ adsorption measurements and is confirmed to possess a microporous structure with a multimodal distribution of micropores with two major maxima at ~0.5 and 0.8 nm.     

扫描环形光斑激光束优化研究

激光束的形状和能量分布限定了激光的应用范围,为满足不同的激光加工需要,必须对激光束进行变换。针对实验室用CO2激光器在热处理方面的应用,提出了激光扫描环形光斑光束优化法。基于温度场叠加原理建立了扫描环形光斑温度场的数学模型,模拟其温度场,可得到其温度分布特性;通过实验研究,分析了聚焦光斑与扫描环形光斑在激光淬火中对材料的热作用效果。结果表明,扫描环形光斑能改善激光热处理硬化层分布。理论和实验研究表明,激光扫描环形光斑技术可以实现激光热处理光束的优化,有一定的应用前景。