Fast Multi‐residue Screening for 84 Pesticides in Tea by Gas Chromatography with Dual‐tower Auto‐sampler,Dual‐column and Dual Detectors

A fast multi‐residue screening method for determining pesticides in tea is described. Pesticides are extracted from tea with acetone and methylene chloride, then enriched and cleaned up with solid phase extraction (SPE) prior to gas chromatographic determination. The fast screening is achieved by a gas chromatograph system equipped with dual‐column, dual‐tower auto‐sampler and both electron capture detector (ECD) and flame photometric detector (FPD). Optimal conditions are investigated for the prospective pesticides including column selection, detection mode, the retention behaviors, quantitative calibration, as well as the recoveries and repeatability of pesticides from tea samples. Under the optimal conditions, with the FPD‐P detector accompanied CP‐SIL 13CB column, 48 pesticides can be separated well and detected within 38 min; and with a DB‐5 column, 35 ECD‐detectable pesticides can be separated and detected within 46 min. The recoveries of 84 pesticides in tea samples are 65–120% with 0.34–16% RSD for spiking 0.02–3.0 mg/kg standard species. Because of the thermal instability of most pesticides, direct cold extraction of pesticides from a tea sample is recommended. The proposed method provided a very fast and efficient procedure to screen 84 pesticides from a complicated tea sample matrix.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.     

A multicommuted fluorescence-based sensing system for simultaneous determination of Vitamins B2 and B6

A multicommuted flow-through optosensor based on the direct fluorescence measurements of Vitamins B₂ and B₆ using a non-polar sorbent (C₁₈ silica gel) as solid sensing zone (to accomplish the separation and subsequent preconcentration/detection of the target analytes) have been developed. The proposed flow system was controlled by Java-written home-made software and designed using three-way solenoid valves for independent automated manipulation of sample and carrier solutions. The native fluorescence signal was simultaneously monitored at two pairs of excitation/emission wavelengths (450/519 and 294/395 for B₂ and B₆, respectively). The separation of the analytes was performed in the detection flow cell, using the differences in the sorption/elution process on the solid support between the two vitamins, due to their different polarity. Using an optimised sampling time, the analytical signal showed linearity in the range 0.01-0.4 and 0.15-3 μg ml⁻¹ with detection limits of 0.003 and 0.045 μg ml⁻¹ for B₂ and B₆, respectively, obtaining R.S.D. (%) values better than 2% for both analytes. The proposed methodology was applied to different pharmaceutical preparations, obtaining remarkably good results with recoveries ranging from 96 to 107.5%.     

Shipboard analysis of picomolar levels of manganese in seawater by chelating resin concentration and chemiluminescence detection

A new shipboard analytical method for determining picomolar levels of manganese in seawater has been developed. The method is based on a combination of chelating resin column extraction and improved chemiluminescence (CL) detection in a closed flow system. In this method, manganese in sample solution is selectively collected on newly-developed iminodiacetate-immobilized chelating resin, and then eluted with acidic solution containing hydrogen peroxide. The resulting eluent is mixed with luminol solution and aqueous ammonia after removal of iron ions by a chelating resin column, and then the mixture is introduced into the CL cell. The manganese concentration is obtained from the CL intensity. The detection limit (3SD) of manganese is 5 pmol L^–1 from 9 mL of seawater sample. The method was applied to seawater samples collected at the Okinawa Trough.     

A study of the compositional variation of the essential oil of ylang-ylang (Cananga odorata Hook Fil. et Thomson,formagenuina) during flower development

Volatile secondary metabolites from Colombian ylang-ylang flowers were obtained by combined steam distillation - solvent extraction. The samples were analyzed by high resolution gas chromatography with flame ionization, nitrogen/phosphorus, or mass spectrometric detection. The chemical composition of the oils extracted from flowers at different stages of development differed both qualitatively and quantitatively. The generation of total volatile metabolites, light oxygenated compounds in particular, increased markedly during flower maturation. In this work the quality of the ylang-ylang essential oils was studied as a function of flower maturity.     

Air-Segmented Continuous-Flow Analysis for Molybdenum in Various Geochemical Samples

 An air-segmented continuous-flow method has been developed for the determination of molybdenum at ultra trace levels using the catalytic effect of molybdate during the oxidation of L-ascorbic acid by hydrogen peroxide. Incorporation of an on-line ion exchange column improved the tolerance limit for various ions. The detection limits with and without the column were 64 pmol L⁻¹ and 17 pmol L⁻¹, and the reproducibilities at 10 nmol L⁻¹ were 2.1% and 0.2%, respectively. The proposed method was applied to the determination of molybdenum in seawater and lake water as well as in rock and sediment samples. This method has the highest sensitivity among the available literature to our knowledge, and is also convenient for routine analysis of molybdenum in various natural samples. Author for correspondence. E-mail: masahito.sugiyama@ sojin0206.mbox.media.kyoto-u.ac.jp Received October 23, 2002; accepted January 28, 2003 Published online May 19, 2003     

Establishment of traceability of ammonium nitrogen determination in wastewater

A case study is presented for the establishment of traceability for ammonium nitrogen determination in wastewater in a routine laboratory in order to fulfil the requirements of ISO/IEC standard 17025. The necessary relevant information was obtained from the method validation data, the quality control data and equipment calibration certificates. The method of measurement is described together with the measurement equation, selected traceable reference standards and the associated measurement uncertainty. The major sources of uncertainty of the result of measurement were identified and the combined uncertainty was calculated. Identification of the main uncertainty sources represents the basis for target operations for reducing the measurement uncertainty of this determination.     

Structural regulation of a peptide-conjugated graft copolymer: a simple model for amyloid formation

The self-assembly of peptides and proteins into beta-sheet-rich high-order structures has attracted much attention as a result of the characteristic nanostructure of these assemblies and because of their association with neurodegenerative diseases. Here we report the structural and conformational properties of a peptide-conjugated graft copolymer, poly(gamma-methyl-L-glutamate) grafted polyallylamine (1) in a water-2,2,2-trifluoroethanol solution as a simple model for amyloid formation. Atomic force microscopy revealed that the globular peptide 1 self-assembles into nonbranching fibrils that are about 4 nm in height under certain conditions. These fibrils are rich in beta-sheets and, similar to authentic amyloid fibrils, bind the amyloidophilic dye Congo red. The secondary and quaternary structures of the peptide 1 can be controlled by manipulating the pH, solution composition, and salt concentration; this indicates that the three-dimensional packing arrangement of peptide chains is the key factor for such fibril formation. Furthermore, the addition of carboxylic acid-terminated poly(ethylene glycol), which interacts with both of amino groups of 1 and hydrophobic PMLG chains, was found to obviously inhibit the alpha-to-beta structural transition for non-assembled peptide 1 and to partially cause a beta-to-alpha structural transition against the 1-assembly in the beta-sheet form. These findings demonstrate that the amyloid fibril formation is not restricted to specific protein sequences but rather is a generic property of peptides. The ability to control the assembled structure of the peptide should provide useful information not only for understanding the amyloid fibril formation, but also for developing novel peptide-based material with well-defined nanostructures.     

Determination of sophoridine and related lupin alkaloids using tris(2,2′-bipyridine)ruthenium electrogenerated chemiluminescence

Electrogenerated chemiluminescences (ECLs) based on tris(2,2′-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) and lupin alkaloids, for instance, sophoridine (SRI), matrine (MT), sophoranol (SR) and sophocarpine (SC) in an aqueous alkaline buffer solution (pH 9.0) are studied. The light emission is mainly caused by an electro-oxidation reaction between tertiary amino group on the alkaloid compounds and Ru(bpy)₃²⁺ in a thin layer flow cell equipped with a glassy carbon disc electrode (22.1 mm²) at the potential of +1.50 V (versus Ag/AgCl). The luminescence wavelength of 610 nm confirmed that ECL is caused by Ru(bpy)₃^2+∗ to its ground state. ECL intensities of these lupin alkaloids are affected by the substituent character, three-dimensional conformation of hydrogen on β-carbon atom. Ionization potentials taken from calculation data further confirm the experimental results. In addition, the factors affecting the determination and HPLC separation of the four alkaloids are also investigated.     

Tantalum(v) oxoalkoxides. Synthesis and structure

Anodic oxidation of tantalum in isopropyl alcohol or prolonged reflux of an alcohol solution of Ta(OPrⁱ)₅ afford crystalline oxoisopropoxide Ta₂O(OPrⁱ)₈ · PrⁱOH (1). In its molecule, two octahedra about Ta atoms are linkedvia the shared edge [(OPrⁱ)O]. Compound1 is the first example of oxoalkoxide containing such a small number of metal atoms. Unlike the known polynuclear molecules M _n O _m (OR) _p , oxoalkoxide1 is stable in solutions; on transition to the gas phase, this compound is desolvated to form a very stable molecule Ta₂O(OPrⁱ)₈ (apparently, consisting of two octahedra with a shared edge). According to the data of mass spectrometry, analogous molecules exist in the gas phase over Ta(OAlk)₅ (Alk = Me, Et, Prⁱ, or Bu¹¹). When compound1 is heated invacuo (10^–2–10^–3 Torr), Ta(OPrⁱ)₅ is sublimated. Crystals of Ta₇O₉(OPrⁱ)₁₇ (2) were formed upon prolonged storage of solutions of1 in PrⁱOH. Heptanuclear molecule2 consists of two [Ta₄] tetrahedra with a shared vertex. These tetrahedra are additionally linked togethervia one ₃-oxo and two ₂-OPrⁱ groups. Complex2 is a representative of heptameric oxoalkoxides of a new structural type.Deceased in I995.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 125–131, January, 1996.