Nash type inequalities for fractional powers of non-negative self-adjoint operators

Assuming that a Nash type inequality is satisfied by a non-negative self-adjoint operator , we prove a Nash type inequality for the fractional powers of . Under some assumptions, we give ultracontractivity bounds for the semigroup generated by .

     

酯基功能化离子液体作为钢/钢摩擦副润滑剂的摩擦学性能研究

合成了含酯基官能团的咪唑类离子液体;研究了其物化性质及热稳定性;通过与非功能化的烷基咪唑离子液体对比,在SRV摩擦磨损试验机上研究了常温及高温条件下酯基功能化离子液体作为钢/钢摩擦副润滑剂的摩擦学性能;用SEM和XPS对磨斑表面进行了分析.结果表明:酯基功能化离子液体具有很高的热稳定性;酯基团的引入使得离子液体的黏度有所增加,导致其在较低载荷下的减摩性能降低,但引入的酯基官能团增强了离子液体对金属表面的化学吸附力,使其抗磨性能显著提高,在高载荷下离子液体分解所产生的活性元素氟与摩擦副表面的金属发生摩擦化学反应,生成以氟化亚铁和氧化铁为主体的边界润滑膜,从而降低了摩擦和磨损.同时发现含有TF₂N^-阴离子的功能化离子液体较含有BF^-₄阴离子的功能化离子液体具有更好的抗磨性能;含有较长N-烷基链的功能化离子液体的抗磨减摩性能较好.     

Synthesis and properties of oxetane‐based polysiloxanes used for cationic UV curing coatings

The polysiloxanes end‐capped with oxetane group (PSiO‐H and PSiO‐L) were synthesized via hydrosilylation reaction based on α,ω‐dihydrogen‐terminated polydimethylsiloxanes with a higher (0.23%, PDSi‐H) and lower (0.12%, PDSi‐L) hydrogen amount. The molecular structures were characterized by FT‐IR and ¹H NMR spectroscopy. The polysiloxanes were added into a commercial oxetane‐based resin, 3,3′‐(oxydi(methylene)) bis(3‐ethyloxetane) (DOX), as an additive to prepare a series of cationic UV curable formulations. The photo‐DSC results showed that the maximum photopolymerization rate decreased while the oxetane conversion increased with the polysiloxane content increasing. The surface hydrophobic property of cured films was improved having the water contact angles of 97° and 99° compared with 82° of the cured DOX film with only 1 wt% PSiOs, respectively. The dynamic mechanical thermal analysis results showed that both the storage modulus on the rubbery plateau region and the glass transition temperature decreased with increasing PSiO‐H loading. Moreover, the decrease became more obvious as PSiO‐L was added instead of PSiO‐H due to its lower concentration of oxetane group. The thermal stability of cured films was enhanced by the addition of PSiOs from the thermogravimetric analysis. And the DOX/PSiO‐H film possessed higher thermal degradation temperatures than DOX/PSiO‐L film. Copyright © 2011 John Wiley & Sons, Ltd.     

两个由醋酸根和含吡啶基配体构筑的Zn(II)配聚物的合成、晶体结构及其荧光性质

以醋酸锌、异烟肼（INH）、2-氨基吡啶（2-APy）为原料在N,N-二甲基甲酰胺（DMF）溶液中合成了2个Zn（Ⅱ）配位聚合物[Zn（CH₃COO）₂（INH）]_n（1）,[Zn（CH₃COO）₂（2-APy）]_n（2）,用红外光谱、元素分析、粉末X射线衍射、X射线单晶衍射对配合物进行了表征。晶体结构测试表明,配聚物1属单斜晶系,空间群P2₁/c,晶胞参数：a=0.914 44（17）nm,b=0.161 86（3）nm,c=0.871 75（16）nm,β=96.181（3）°,V=1.282 8（4）nm³,Z=4;配聚物为2D层状结构,该层状结构通过氢键弱相互作用,进一步形成3D超分子结构。配聚物2属三斜晶系,空间群P1,晶胞参数：a=0.747 0（4）nm,b=0.814 5（5）nm,c=1.895 7（11）nm,α=88.276（8）°,β=86.202（8）°,γ=84.334（8）°,V=1.144 9（11）nm³,Z=2;配聚物2为一维zig-zag链状结构。室温固态荧光测试显示,配聚物1、2分别在最大波长382.6和367.5 nm处具有较强的荧光发射。     

Effects of ultrasonic–microwave combination treatment on the physicochemical,structure and gel properties of myofibrillar protein in Penaeus vannamei (Litopenaeus vannamei) surimi

The objective of this study was to evaluate the effects of single ultrasound (360 W, 20 min), single microwave (10 W/g, 120 s) and ultrasonic–microwave combination treatment on shrimp surimi gel properties. The structure and physicochemical properties of myofibrillar protein (MP) were also determined. Low-field nuclear magnetic resonance showed that the fluidity of water molecules and the moisture content decreased, the stability and water holding capacity (WHC) increased after single ultrasound, single microwave and ultrasonic–microwave combination treatment. Compared with the traditional water bath treatment, ultrasound and microwave treatment reduced the total sulfhydryl content and promoted the formation of intermolecular disulfide bonds and hydrophobic interactions, which improved the compactness of the network structure of shrimp surimi gel. Moreover, Fourier transform infrared spectroscopy and sodium dodecyl sulfate–polyacrylamide gel electrophoresis analysis revealed that these treatments not only inhibited the degradation of MP, but also decreased the α-helix content and increased the β-sheet content. The three treatments also significantly reduced the particle size and decreased the solubility of MP. Overall, the effect of ultrasonic–microwave combination treatment was superior to that of either single treatment.     

Transport properties of acetone aqueous solutions: molecular dynamics simulation and NMR studies

Two quantities η_rel and are applied to study the nonideal acetone–water association mixture. An all-atom acetone model and a TIP5P water model have been adopted for molecular dynamics simulation. We study the transport properties of the system comparing the 's of strong hydrogen bond and weak contact based on transport properties, MD simulations together with NMR experimental data and find good agreement of concentration dependence, which exhibits the cooperation effect.     

钇,铈对低铪镍基K444返回合金组织与力学性能的影响

研究了Y,Ce对含铪(Hf)镍基铸造高温合金K444返回料(添加50%返回料)合金的力学性能和组织的影响.研究结果表明:适量Y,Ce(Y<0.03%,Ce<0.015%(质量分数))添加到返回料合金后,一方面,Y,Ce具有去除N,O等有害杂质的作用,使O含量由15×10~(-6)降低到8×10~(-6),N含量由35×10~(-6)降低到18×10~(-6),从而使返回料合金得到净化.另一方面,Y,Ce细化了枝晶组织,减少了共晶和大块状碳化物数量,并且强化了晶界.和未加Y,Ce的返回料合金相比.添加Y,Ce使返回料合金室温拉伸强度提高约100 MPa,塑性提高近一倍;使900℃的高温瞬时拉伸性能波动较为平稳,塑性提高近一倍.添加Y,Ce还可以提高返回合金900℃/274 MPa条件下的持久性能,达到新料水平;可以明显延长K444返回合金900℃/274 MPa条件下的蠕变第二阶段,提高蠕变寿命.     

加氢处理催化剂载体中Y型分子筛组分对催化剂表面性质和催化性能的影响

应用ＸＲＤ，ＸＰＳ，ＩＲ－ＴＰＤ，ＣＯ２和ＮＯ吸附及正庚烷裂解和噻吩加氢脱硫脉冲微反等方法，研究了加氢处理催化剂载体经Ｙ型分子筛改性前后各种性质的变化，结果表明，载体经Ｙ型分子筛改性后，催化剂的Ｂ酸、正庚烷裂解活性和异构选择性明显提高，Ｙ型分子筛以分散的形式分布于γ－Ａｌ２Ｏ３表面，减少了载体表面的空位铝，该催化剂中有盯当一部分金属组分进入Ｙ型分子筛孔道与３其Ｂ酸位作用，与ＮｉＱ／γＡｌ２Ｏ３相比     

双核mn2+配合物的合成、结构及表面光电性能

双核锰配合物;氢键;表面光电性能;表面光电压光谱