HL-2M 装置冷却水系统介绍

介绍了 HL-2M 装置冷却水系统的组成以及各子系统的循环流程、运行原理和运行参数。      

A Hybrid Metaheuristic Based on Neurocomputing for Analysis of Unipolar Electrohydrodynamic Pump Flow

A unipolar electrohydrodynamic (UP-EHD) pump flow is studied with known electric potential at the emitter and zero electric potential at the collector. The model is designed for electric potential, charge density, and electric field. The dimensionless parameters, namely the electrical source number (Es), the electrical Reynolds number (ReE), and electrical slip number (Esl), are considered with wide ranges of variation to analyze the UP-EHD pump flow. To interpret the pump flow of the UP-EHD model, a hybrid metaheuristic solver is designed, consisting of the recently developed technique sine–cosine algorithm (SCA) and sequential quadratic programming (SQP) under the influence of an artificial neural network. The method is abbreviated as ANN-SCA-SQP. The superiority of the technique is shown by comparing the solution with reference solutions. For a large data set, the technique is executed for one hundred independent experiments. The performance is evaluated through performance operators and convergence plots.     

两相流有限穿越可视图演化动力学研究

针对小管径两相流流动特性, 全新优化设计弧形对壁式电导传感器. 通过动态实验在获取传感器测量信号的基础上, 采用有限穿越可视图理论构建对应于不同流型的两相流复杂网络. 通过分析发现, 有限穿越可视图网络异速生长指数和网络平均度值的联合分布可实现对小管径两相流的流型辨识; 有限穿越可视图度分布曲线峰值可有效刻画与泡径大小分布相关的流动物理结构细节特征; 网络平均度值可表征流动结构的宏观特性; 网络异速生长指数对流体动力学复杂性十分敏感, 可揭示不同流型演化过程中的细节演化动力学特性. 两相流测量信号的有限穿越可视图分析为揭示两相流流型的形成及演化动力学机理提供了新途径. 关键词： 两相流 复杂网络 有限穿越可视图 网络异速生长指数     

可压缩涡流场中空泡运动规律及声辐射特性研究

基于可压缩流体力学基本理论, 通过边界积分方程, 采用不同表面压力模型, 求解空泡在计及可压缩性的涡流场中的运动规律; 通过表面离散及坐标变换, 采用Kirchhoff动边界积分方程, 将空泡表面视为运动变形边界, 作为直接噪声源, 获得涡流场中空泡运动产生的时域声压分布; 分析了涡流场参数对空泡运动规律及声辐射特性的影响. 研究结果表明: 计及流场可压缩性, 空泡的脉动幅度会随时间减弱, 辐射声压幅值随之减小; 空泡在涡流场中会发生延展、 颈缩、 撕裂, 并在撕裂后子空泡中形成射流; 当流场中的压力减小时, 空泡运动过程中的最大半径与撕裂前的最大长度逐渐增加, 且当流场中压力较小时, 空泡撕裂时形成的子空泡增多; 空泡辐射声压的指向性较弱, 撕裂会使辐射声压产生突变, 形成极大峰值; 随着涡通量的增大或空泡数的减小, 空泡脉动周期及其诱导的辐射声压波动周期随之延长, 辐射声压峰值逐渐滞后并减小. 本文结果旨在为涡流场中空泡运动规律及声辐射特性的相关研究提供参考. 关键词： 可压缩 涡流场 空泡 声辐射     

Entropic lattice Boltzmann method for turbulent flow simulations: Boundary conditions

We introduce a new concept of boundary conditions for realization of the lattice Boltzmann simulations of turbulent flows. The key innovation is the use of a universal distribution function for particles, analogous to the Tamm–Mott-Smith solution for the shock wave in the classical Boltzmann kinetic equation. Turbulent channel flow simulations demonstrate that the new boundary enables accurate results even with severely under-resolved grids. Generalization to complex boundary is illustrated with an example of turbulent flow past a circular cylinder.     

A dynamical systems approach to mixing and segregation of granular materials in tumblers

The physics of granular matter is one of the big questions in science. Granular matter serves as a prototype of collective systems far from equilibrium and fundamental questions remain. At the same time, an understanding of granular matter has tremendous practical importance. Among practical problems, granular mixing and its interplay with segregation is arguably at the top of the list in terms of impact. Granular mixing in three-dimensional systems is complicated, as flow induces segregation by particle size or density. Several approaches and points of view for analysis are possible in principle, ranging from continuum to discrete. Flow and segregation in three-dimensional systems is seemingly complicated; however, to a reasonable approximation, all of the dynamics takes place in a thin flowing surface layer. This observation, coupled with key experimental results, leads to a simple, compact and extensible continuum-based dynamical systems framework applicable to time-periodic flow in quasi-two-dimensional tumblers and three-dimensional systems (such as spheres and cubes) rotated about one or more axes of rotation. The case of time-periodic systems, in its simplest version, can be viewed as a mapping of a domain into itself. The placement of periodic points can be investigated using symmetry concepts; the character of the periodic points and associated manifolds provides a skeleton for the flow and a template for segregation processes occurring in the flow.     

Simultaneously Enhancing Mechanical Properties and Melt Flow Ability of Polyamide 6 by Blending with a Hyperbranched Polymer

A series of polyamide 6/hyperbranched polymers (PA6/HBP) blends with different HBP contents was prepared by melt processing using a twin-screw extruder. The HBP was synthesized on the basis of pentaerythritol and dimethyl terephthalate according to a one-step method. The melt flow behavior, crystallization behavior, morphology, and mechanical properties of the PA6/HBP blends were investigated. The results showed that the melt flow index of the blends was greatly improved by a small amount of HBP. The yield strength, tensile modulus, Izod impact strength, and flexural strength of samples were simultaneously enhanced from 54.6 MPa, 0.5 GPa, 3.8 kJ/m², 56.9 MPa for pure PA6 to 61.1 MPa, 0.7 GPa, 5.3 kJ/m², 67.1 MPa for PA6 blends with 2.0 wt% HBP, respectively. The PA6/HBP blends showed the higher content of α-form crystal and a higher degree of crystallinity than those of pure PA6.     

Hybrid Particle–Continuum Simulations of Polymer Brushes in Shear Flow

A hybrid particle–continuum method is used to study the shear flow confined between two opposing walls, one of which is coated with polymer chains. Molecular dynamics (MD) is used in the particle region near the brush and Navier–Stokes (NS) equations are applied in the remaining region where the continuum assumption holds. The information exchange from the continuum region to the particle region is implemented using the constrained particle dynamics. Both Couette shear flow and oscillatory flow are considered in the present work. The effect of the shear flow on the conformational characteristics of polymer brushes is analyzed. In the overlap region, the velocities obtained from MD simulations are smoothly connected with those from NS equations. Our investigations demonstrate that the hybrid particle–continuum model is valid in exploring the shear behavior of polymer brushes.     

Flow‐Injection Online Reduction Atomic Fluorescence Spectrometry Determination of Se(IV) and Se(VI) with Electrochemical Hydride Generation

Abstract

A new flow‐injection online reduction electrochemical hydride generation system for the determination of Se(IV) and Se(VI) by atomic fluorescence spectrometry (AFS) was developed. In the system, an electromagnetic induction oven was used as heating resource to reduce Se(VI) to Se(IV) and a homemade tubular electrolytic cell as hydride generator. All analytical procedures were automatically controlled by a computer. The conditions of online reduction, including temperature, HCl concentration, and reduction time, have been studied in detail. The detection limits (3σ) of Se(IV) and Se(VI) in aqueous solution were 0.26 µg L^?1 and 0.23 µg L^?1, respectively. The precision for 11 replicate measurements of 50 µg L^?1 Se(IV) and Se(VI) was 2.2% and 2.5%. This proposed method has been applied to the determination of Se(IV) and Se(VI) in springwater samples.