微波诱导Fe2O3/Al2O3催化剂催化氧化处理水中苯酚

 以γ-Al2O3为载体,采用浸渍-焙烧法制备了Fe2O3/Al2O3催化剂,并将其应用于微波诱导催化氧化处理模拟含酚废水. X射线衍射和X射线荧光光谱测试结果表明,活性组分氧化铁在催化剂中以α-Fe2O3的形式存在,其含量为3.71%. 与载体氧化铝相比,Fe2O3/Al2O3催化剂的比表面积和平均孔径及平均孔容略有降低. 对于100 mg/L的模拟含酚废水,最佳的处理工艺条件为: 微波辐照功率400 W,辐照时间5 min,催化剂加入量60 g/L,H2O2浓度600 mg/L,体系pH＞4. 在此工艺条件下,水中苯酚的去除率达97.98%. 催化剂连续使用20次后苯酚去除率仍达96.34%. 表观反应动力学研究表明,在氧化铁催化剂存在的条件下,微波诱导H2O2产生氧化性极强的羟基自由基,整个反应过程可分为微波诱导阶段和催化氧化阶段,两个阶段的氧化过程均符合一级反应动力学规律.     

规模化养殖场废水中抗生素种类及残留特征研究

2010年调查了海南省6家规模化养猪场抗生素使用品种及来源,并采集养殖废水样品,用高效液相色谱紫外检测器检测了样品中4种四环素(四环素、土霉素、金霉素和强力霉素)和8种磺胺类药物(磺胺嘧啶、磺胺甲噻唑、磺胺噻唑、磺胺二甲基嘧啶、磺胺氯哒嗪、磺胺邻二甲氧嘧啶、磺胺间二甲氧嘧啶和磺胺喹恶啉)的残留浓度水平。结果显示,6家养殖场废水中土霉素、四环素和磺胺嘧啶的检出率及检出浓度较高,其中土霉素检出率为100%,最高浓度为71.75μg/L;四环素检出率为63%,最高检出浓度为24.83μg/L;磺胺嘧啶检出率为83%,最高检出浓度为17.69μg/L。4种四环素类检出总量变化范围为18.25～99.64μg/L,8种磺胺类检出总量变化范围为3.45～24.49μg/L;从养殖规模上看,小规模养殖场抗生素类检出品种较多,检出浓度也较高。     

离子液体处理含油污水实验研究

合成出了适合于含油污水处理的憎水性离子液体,研究了离子液体对含油污水的处理条件。当离子液体与含油污水体积比为1∶5,pH值为5,处理15min后,水中油的去除率为95.6%,COD_Cr的去除率为93.5%,表明应用离子液体可以有效地去除油田采出水中的有机物。同时考察了再生离子液体对除油效果的影响,其五次平行实验的除油率达95.4%,COD_Cr去除率为93.2%,表明离子液体可以回收利用。在此基础上,分析了离子液体对含油污水处理的作用机理。     

核壳Fenton催化剂CuFe_2O_4@PDA-Cu的制备、表征及其活化H_2O_2降解染料的性能

为得到新型高效多相催化剂,有效去除废水中的染料,以Cu(Ac)_2与CuFe_2O_4@PDA为原料制备了催化剂CuFe_2O_4@PDA-Cu.通过IR、XRD、XPS、UV-Vis、DRS技术对催化剂的性能进行了表征,考察了温度、H_2O_2用量、催化剂用量、pH值、盐等对催化活性的影响.利用HPLC测定降解产物,采用自由基捕获和抑制实验进行机理验证,发现催化剂是核壳结构.温度升高、pH值升高、H_2O_2和催化剂用量的增加均有利于提高催化活性;氯化物、硫酸盐、硝酸盐和磷酸盐不影响催化效果,溴化物和亚硝酸盐降低了催化效果.得到的最优降解条件为:T=30℃,催化剂用量10mg·L~(-1),pH=9,过氧化氢用量10mmol·L~(-1),染料浓度30mg·L~(-1).最优条件下催化剂可循环使用4次以上;甲基橙、茜素红和罗丹明B的去除率为100%;染料R0213、O0118和B0115的去除率大于60%.降解产物有草酸、马来酸和CO_2.甲基橙、茜素红和罗丹明B降解后COD_(Mn)=2~4mg·L~(-1).水杨酸捕获·OH生成2.5-二羟基苯甲酸,叔丁醇抑制染料降解.结果表明,催化剂可活化H_2O_2产生·OH,·OH攻击染料分子开环降解直至矿化.该研究为开发高效多相催化剂,有效去除废水中的染料提供了科学依据.     

Speciation studies of nickel and chromium in wastewater from an electroplating plant

A speciation scheme involving the use of flame atomic absorption spectrometry (FAAS) and differential pulse adsorptive cathodic stripping voltammetry (DPAdCSV) techniques was applied to studies of nickel and chromium in wastewater from a nickel-chrome electroplating plant. Dimethylglyoxime (DMG) and diethylenetriaminepentaacetic acid (DTPA) were employed as complexing agents for adsorptive voltammetric determination of Ni and Cr, respectively. Cr(III) and Cr(VI) were determined by exploiting differences in their reactivity towards DTPA at HMDE. Total dissolved metal content was in the range 2906-3141 and 30.7-31.2 mg l⁻¹ for Ni and Cr, respectively. A higher percentage of the metal was present as labile species (mean value of 67.9% for Ni and 79.8% for Cr) suggesting that strongly binding ligands are not ubiquitous in the sample. About 77.8% of Cr was found to exist in the higher oxidization state, Cr(IV). Results on effect of dilution on lability of the metal forms in the sample using DPAdCSV showed slight peak shifts to a more negative (cathodic) value by −0.036 V for Ni and −0.180 V for Cr with a dilution factor of 100, while peak intensity (cathodic current) remained fairly constant.     

COD速测仪测定工业废水中CODCr

采用标准回流法和仪器法（用ＣＯＤ速测仪）对工业废水化学需氧量进行对照测定，结果发现，用ＣＯＤ速测仪测定工业废水，简便、快速、精密度好、准确度高。     

Long-term operation of a domestic wastewater treatment plant with membrane filtration

Possibilities of membrane technology and the use of membrane processes in wastewater treatment were investigated. The main focus was the monitoring of the starting phase of a domestic wastewater treatment plant. Experimental part of the study was realized at the municipal wastewater treatment plant (WWTP) Devínska Nová Ves — Bratislava during the period from February 2005 to September 2006. The system was stable without any external chemical treatment of the membrane modules and the permeate quality was very high. Observed decrease of COD and BOD₅ values ranged between 91 % and 98 %. The process of nitrification was very successful considering its high efficiency (> 95 %). Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Electrodeposition of zinc oxide nanoparticles on multiwalled carbon nanotube-modified electrode for determination of caffeine in wastewater effluent

We report on the development of an electrochemical sensor based on electrodepositing zinc oxide on multiwalled carbon nanotube-modified glassy carbon electrode for the detection of caffeine in pharmaceutical wastewater effluents. The measurements were carried out using cyclic voltammetry, electrochemical impedance spectroscopy, chronoamperometry and differential pulse voltammetry (DPV). DPV measurements showed a linear relationship between oxidation peak current and concentration of caffeine in 0.1 M HClO₄ (pH 1.0) over the concentration range 0.00388–4.85 mg/L and a detection limit of 0.00194 mg/L. The diffusion coefficient and Langmuir adsorption constant for caffeine were calculated to be 3.25 × 10^?6 cm² s^?1 and 1.10 × 10³ M^?1, respectively. The sensor showed satisfactory results when applied to the detection of caffeine in wastewater effluents.     

Ultrasound‐assisted dispersive liquid–liquid microextraction coupled with capillary gas chromatography for simultaneous analysis of nine pyrethroids in domestic wastewaters

A simple and rapid ultrasound‐assisted dispersive liquid–liquid microextraction method coupled with GC‐flame ionization detection was developed for simultaneous determination of nine pyrethroids in domestic wastewater samples. An ultrasound‐assisted process was applied to accelerate the formation of the fine cloudy solution using small volume of disperser solvent, which markedly increased the extraction efficiency and reduced the equilibrium time. Various parameters affecting the extraction efficiency were investigated, including the type and volume of extraction solvent and disperser solvent, extraction and ultrasonic time. Good linearity was obtained for all analytes in the range of 0.8–100 μg/L with the correlation coefficient (r²)≥0.998. The recoveries at three spiking levels ranged from 75.3 to 101.2% with the RSD less than 8.7% (n=5). Under the optimum condition, the enrichment factors for the nine pyrethroids ranged from 728‐ to 1725‐fold. This method offered a good alternative for routine analysis due to its simplicity and reliability.