N，N′—1，2—丙水杨酰胺合铜（Ⅱ）酸根的双核Cu（Ⅱ）配合物的合成与磁性

合成了一类新的金属配合物[Cu(sampn)CuL](sampn^4-:N，N′－1，2－丙水杨酰胺根离子；L：2，2－联吡啶或1，10－菲绕啉），经元素分析、IR、电子光谱等手段推定配合物具有酚氧桥结构，Cu（Ⅱ）离子和配位环境为畸变四方构型，测定了配合物的变温磁化率，其数值用量二乘法与修正的Bleaney-Bowers方程拟合，从中得到较大的θ值，表明双核分子间有较大的分子间相互作用。     

E，E—1，4—二[2′,2^〃—（苯并恶唑基乙烯基）]苯及衍生物的合成和光性能

合成了E，E－1，4－二[2′,2^〃-（苯并恶唑基乙烯基）]苯及衍生物共14种，测定了它们的熔点、红外光谱、核磁共振氢谱、紫外吸收光谱和荧光发射光谱、荧光量子产率及激光性能。     

全硅FER沸石上有机吸附物脱附行为的研究

运用热分析技术,研究吸附在体相和表面结构完美的单晶状疏水全硅FER沸石孔道中的有机化合物的脱附行为,测定亲和性指数AT值和负载量。所研究的吸附质为直链烷烃、直链烷基醇、直链烷基胺等,结果显示醇有较低的AT值,而直链烷烃有较高的AT值,胺类有最高的AT值。证明全硅FER沸石骨架对烷基、胺基呈现出强的"亲和性",而对羟基呈现出“憎性”。同时还发现吸附质的链长对脱附性质、AT值也有较大影响。     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

以混合模板剂合成TS-1分子筛及其性能研究

以四丁基溴化铵（ＴＢＡＢｒ）＋四乙基氢氧化铵（ＴＥＡＯＨ，ｎ（ＴＢＡ＋）／ｎ（ＴＥＡ＋）＝１）或以四丙基溴化铵（ＴＰＡＢｒ）＋ＴＥＡＯＨ为模板剂，钛酸四丁酯和正硅酸乙酯为原料，于１７０℃水热合成出ＴＳ１分子筛．对合成的ＴＳ１样品进行了ＸＲＤ，ＦＴＩＲ，ＳＥＭ和ＢＥＴ比表面积分析，证实了样品中钛已进入Ｓｉｌｉｃａｌｉｔｅ１骨架．选择戊烷氧化为探针反应，考察了ＴＳ１的催化活性．结果表明以ＴＥＡＯＨ为碱，合成的样品晶粒较大，达到４～１０μｍ，用氨水和ＴＥＡＯＨ调节反应液的碱度，对晶体的生长和形貌的影响各不相同．文中还就ＴＥＡＯＨ引入的作用进行了讨论．     

纳米晶复合Nd2Fe14B/α-Fe合金制备与磁性能的研究

采用熔体快淬及晶化处理工艺制备Nd11Fe71Co8V1.5Cr1B7.5纳米晶合金。经21m·s-1快淬及640℃ 4min晶化处理后,制成的粘结磁体的磁性能最佳,为:Br=0.64T,JHc=903.5kA·m-1,(BH)max=71kJ·m-3。添加Cr元素可提高内禀矫顽力,从而提高最大磁能积。     

镓改性ZSM-5沸石中镓活性中心的形成与表征

采用脉冲微反体系研究了经不同程度还原和不同镓含量的GaZSM-5沸石的芳构化性能与吡啶吸附红外光谱特征谱带吸收度的关联，证实了1458 cm~(-1)吸收带的用于表征与Ga物种有关的活性中心，并研究了沸石的硅铝比对Ga中心形成和Ga的价态对芳构化性能的影响。结果表明，对Ga含量相同的样品来说，硅铝比愈低，起始Ga中心生成量愈多，高价态与低价态的Ga中心对丙烷芳构化反应都有促进作用。     

硝酸铽与1，1，1′，1′-四(吡啶-2-羧酸酯基)联三甲基丙烷配合物的合成、表征及荧光性质

Solid complex of terbium nitrate with a novel tetrapodal ligand, 1,1,1′,1′-tetra(2-pyridinecarboxylester)-di(trimethylpropane) was prepared. This new complex with the formula of [TbL(NO₃)](NO₃)₂·2H₂O was charact-erized by elemental analysis, molar conductivity, IR spectroscopy and thermal analysis. At the same time, the luminescent property of the complex was also studied.     

Ab Initio Calculation of Room Temperature Ionic Liquid 1-Ethyl-3-Methyl-Imidazolium Chlorocuprate (Ⅰ)

The Hartree-Fock method has been employed to investigate the electronic structures of EMIM (1-ethyl-3-methyl-imidazolium ), CuCl2-, Cu2Cl3-, CuCl32-, EMIM -CuCl2-, EMIM -Cu2Cl3- , and EMIM -CuCl32- pairs. Full optimization and frequency analyses of EMIM , CuCl2-, Cu2Cl3-, CuCl32-, eight initial EMIM -CuCl2-, six EMIM -Cu2Cl3-, and four EMIM -CuCl32- geometries have been carried out using Gaussian-94 soft-package at 6-31 G(d,p) basis set level for hydrogen, carbon, nitrogen, chlorine atoms and Hay-Wadt effective core potential for copper atom. The electronic structures of lowest energy of EMIM -CuCl2-, EMIM -Cu2Cl3-, EMIM -CuCl32-, single EMIM , CuCl2-, Cu2Cl3-, and CuCl32- have been comparatively studied. The calculated results showed that EMIM -CuCl2- pair conformer of lowest energy was five ring parallel to Cl—Cu—Cl with 3.2 A distance, EMIM -CuCl32- pair conformer of lowest energy was five ring parallel to CuCl32-plane with 3.4 A distance, and the optimized EMIM -Cu2Cl3- pair conformer of lowest energy was five ring perpendicular to Cl—Cu—Cl—Cu—Cl plane with 3.0 (?) distance between the terminal Cl atoms and the 5-ring of EMIM . The cohesion between cations and anions is brought about by C—H…Cl hydrogen bonds that are reinforced by charge assistance. The frequency analyses suggested that all stationary points are minimum because of no appearing of imaginary frequency. The assigned frequencies were in agreement with the experimental report. The low energy of interaction because of the bulky asymmetry of EMIM and the charge dispersion of cation and anion leads to the low melting point of the ionic liquids, EMIM -CuCl2-, EMIM -Cu2Cl3-, and EMIM -CuCl32-. The interaction energy of EMIM -CuCl2-, EMIM -Cu2Cl3-, and EMIM -CuCl32- is 309.0 kJ/mol, 316.8 kJ/mol, and 320.2 kJ/mol, respectively. The relationship of interaction energy via distance between cations and anions was also investigated by single point energy scan.     

Synthesis of 1-Bromo-3-methoxy-4-propoxy-5-iodobenzene——A Novel Efficient Process for the Synthesis of Brominated Aromatic Compound

The reaction of aromatic carboxylic acid with oxalyl chloride gives rise to the corresponding acid chloride which without purification is treated with the sodium salt of mercaptopyridine oxide in the presence of 2,2-azo-bisisobutyronitrile (AIBN), radical initiator to give a brominated aromatic compound. After etherification and oxidation, 5-iodovaniline was converted to trisubstituted benzene carboxylic acid which give 1-bromo-3-methoxy-4-propoxy-5-iodobenzene by this new brominating process with a yield of 74%.