Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

铜(II)-酪氨酸乙酯络合物催化-锅内法合成S-(-)-l,l'-联萘-2,2'-二酚

利用“一锅法”，以L-酪氨酸乙酯为原料和铜(Ⅱ)反应生成络合物，不对称催 化氧化偶合2一萘酚合成S-(-)-1，1＇-联萘-2，2＇-二酚，选择最佳反应条件，可 使化学产率达到67％，光学产率达到62％．     

α，α-二取代环十二酮的构象

利用分子力学计算，1~H NMR和单晶X射线衍射分析技术研究了α，α-二取代 环十二酮的构象．结果势构象骨架仍是[3333]-2-酮，在晶体和溶液中，它们的优 势构象均为α-角顺、α-角反-二取代[3333于α-角反位，后上基团处于α-角顺位.     

Counterpoise-corrected potential energy surfaces of simple H-bonded systems

Geometries and stabilization energies of various simple H-bonded complexes (water dimer, hydrogen fluoride dimer, formamide dimer, formic acid dimer) have been determined by a gradient optimization that eliminates the basis set superposition error (BSSE) by the counterpoise (CP) method in each gradient cycle as well as by the standard gradient optimization. Both optimization methods lead to different potential energy surfaces (PES). The difference depends on the theoretical level used and is larger if correlation energy is considered. Intermolecular distances from the CP-corrected PES are consistently longer, and this difference might be significant (∼0.1 ?); also angular characteristics determined from both surfaces differ significantly. Different geometries were obtained even when passing to larger basis sets (aug-cc-pVDZ). The standard optimization procedure can result in a completely wrong structure. For example, the “quasi-linear” structure of the (HF)₂ (global minimum) does not exist at the standard MP2/ 6-31G** PES (where only cyclic structure was detected) and is found only at the CP-corrected PES. Stabilization energies obtained from the CP-corrected PES are always larger than these from the standard PES where the BSSE is added only a posteriori for the final optimized structure; both energies converge only when passing to a larger basis set (aug-cc-pVDZ). Received: 11 March 1998 / Accepted: 19 June 1998 / Published online: 4 September 1998 RID=" ID=" <E6>Acknowledgements.</E6> The project was supported by the Grant Agency of the Czech Republic (Grant No. 203/98/1166). RID=" ID=" <E5>Correspondence to</E5>: P. Hobza     

(R)-α-烷基糠胺的不对称合成

本文通过(+)-樟脑缩呋喃甲亚胺的不对称烷基化反应, 合成了(R)-α)-烷基糠胺。反应的非对映选择性经1H NMR测定为5～67%(d.e)。用1, 3-二碘丙烷和α, α-二溴邻二甲苯作烷基化试剂, 得到预期的双亚胺烷基产物, 而用1,2-二溴乙烷时,却给出偶联产物。     

Nucleophilic de-coordination and electrophilic regeneration of "hemilabile" pincer-type complexes: formation of anionic dialkyl, diaryl, and dihydride Pt(II) complexes bearing no stabilizing pi-acceptors

Novel anionic dialkyl, diaryl, and dihydride platinum(II) complexes based on the new "long-arm" hemilabile PCN-type ligand C6H4[CH2P(tBu)2](CH2)2N(CH3)2 with the general formula Li+[Pt(PCN)(R)2]- (R=Me (4), Ph (6) and H (9)) were prepared by reaction of [Pt(PCN)(R)] complexes (obtained from the corresponding chlorides) with an equivalent of RLi, as a result of the opening of the chelate ring. Alkylating agents based on other metals produce less stable products. These anionic d8 complexes are thermally stable although they bear no stabilizing pi acceptors. They were characterized by 1H, 31P[1H], 13C, and 7Li NMR spectroscopy; complex 9 was also characterized by single crystal X-ray crystallography, showing that the Li+ ion is coordinated to the nitrogen atom of the open amine arm and to the hydride ligand (trans to the P atom) of a neighboring molecule (H--Li=2.15 A), resulting in a dimeric structure. Complexes 4 and 9 exhibit high nucleophilic reactivity, upon which the pincer complex is regenerated. Reaction of 4 with water, methyl iodide, and iodobenzene resulted in the neutral complex [Pt(PCN)(CH3)] (3) and methane, ethane, or toluene, respectively. Labeling studies indicate that the reaction proceeds by direct electrophilic attack on the metal center, rather than attack on the alkyl ligand. The anionic dihydride complex 9 reacted with water and methyl iodide to yield [Pt(PCN)(H)] (8) and H2 or methane, respectively.     

Fluoroapatite - material for medicine,Growth, morphology and thermoanalytical properties

Fluoroapatite containing glass-ceramics were prepared from Li₂O-CaO-CaF₂-P₂O₅-SiO₂ system. The glass was melted at 1480°C for 1 h. The object of observation was the preparing crystal phase of fluoroapatite in amorphous glass matrix. The morphology of lithium disilicate glass-ceramics was studied by SEM. The crystal growth and thermal properties of fluoroapatite were studied by X-ray diffraction and DTA. The more the content of P₂O₅, the more the presence of fluoroapatite particles. SEM investigation clearly indicated the phase separation and formation of a primary crystalline phase of fluoroapatite in the studied glass-ceramics. DTA curves of the fluoroapatite samples exhibit exothermic effects in the temperature range 337-694°C depending on the composition of the materials. The position of exothermic peak for lithium disilicate on DTA curves moves with increasing specific surfacetowards lower temperatures which points on its preferential surface crystallization. As far as physical qualities are concerned, mainly color and gloss, the best qualities of all observed materials belong to glass-ceramics with 10% P₂O₅. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymorphism of Ph2P(CH2Py)(NSiMe3) and the Staudinger Reaction of Ph2P(CH2Py) with Hydrogenazide1)

A new polymorph of the iminophosphorane Ph₂P(CH₂Py)(NSiMe₃), ( 1 ), is compared to a just recently published. The reaction of the starting material, the phosphane Ph₂P(CH₂Py) with N₃SiMe₃ in the presence of water gives [Ph₂P(CH₂Py)(NH₂)][N₃], ( 2 ). A comparison of the structural and NMR parameters of 2 with previously reported derivatives of 1 , suggests that 2 is best described as a phosphonium salt in which the negatively charged imino nitrogen atom is protonated, according to [Ph₂(CH₂Py)P⁺—NH₂][N₃]^—, rather than as an iminiumphosphane salt [Ph₂(CH₂Py)P=⁺NH₂][N₃]^—.     

带手性酰胺醇侧链的1，5－二氮环辛烷的合成

用手性α－氨基醇和氯乙酰氯作用得到的手性酰胺醇（2a－2f）和1，5－二氮 环辛烷反应，合成了带手性侧臂的1，5－二氮环辛烷衍生物N，N’-二[（S）／（ R）－N－（1－羟甲基羟基）－乙酰胺－2]－1，5－二氮环辛烷（1a－1f）。     

硼化合物的研究——Ⅴ.氢硼酸π-芳烃-π-环戊二烯基铁的合成和性质

本文研究了氢硼酸根(B_(12)H_(12)~(2-)、B_(10)H_(10)~(1-)、B_(11)H_(14)~-)和π-芳烃-π-环戊二烯基铁阳离子的反应,合成了36个氢硼酸π-芳烃-π-环戊二烯基铁化合物。通过元素分析和红外光谱测定确定了化合物的组成。部份化合物还作了~1H NMR鉴定。对化合物的性质,包括它们的热行为,进行了较详细的研究。DTA仪测得的结果表明,(1)当阳离子相同时,化合物的热稳定性的顺序为:[ArFeC_5H_5]_2B_(12)H_(12)>[ArFeC_5H_5]_2B_(10)H_(10)>[ArFeC_5H_5]B_(11)H_(14);(2)当氢硼酸根相同时,其热稳定性受芳环上取代基的影响。