New Host Molecules with Imidazoliums as Functional Arms:Syntheses and Anion Recognition

The bridged tri-imidazoliums 3.3X^--5.3X^-(X^-=PF6^-,Br^-,I^-)and bis-imidazoliums 6.2PF6^- were synthesized by N-quaternization of imidazole derivative 1 in acetonitrile under reflux.UV spectroscopic titration experiments showed that the halide salts and hexafluorophosphate salts of these imidazoliums exhibited good recognition toward anions in water and in acetonitrile,respectively.     

构建巯基-Ce(Ⅳ)盐氧化还原引发体系实现丙烯腈在硅胶微粒表面的高效接枝聚合

使用偶联剂γ-巯丙基三甲氧基硅烷(MPMS,KH-590),对微米级硅胶微粒进行了表面化学改性,将巯基引入硅胶微粒表面(SiO2-MPMS),构成巯基-Ce(Ⅳ)盐氧化-还原引发体系,探索研究了丙烯腈在硅胶微粒表面的引发接枝聚合,制得了高接枝度(30 g/100g)的接枝微粒SiO2-MPMS-g-PAN.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-MPMS-g-PAN进行了表征.在此基础上,重点研究了主要因素对巯基-Ce(Ⅳ)盐体系引发AN接枝聚合的影响.研究结果表明,类似于羟基-Ce(Ⅳ)盐体系,巯基-Ce(Ⅳ)盐体系也可以有效地引发乙烯基单体在固体微粒表面接枝聚合.与在固体微粒表面引入可聚合双键的"grafting through"接枝聚合法相比,铈盐引发的接枝聚合,由于活性位点居于载体表面,故具有高的接枝度,是一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-MPMS-g-PAN,本研究体系适宜的酸浓度为0.25 mol/L;Ce(Ⅳ)盐浓度为5.0×10-3 mol/L;接枝聚合宜在50℃下进行.     

精馏过程中的一些物理化学知识及其应用进展

简单的一次蒸馏只能粗略地把多组分系统相对分离。要使混合液得到较为完全的分离,则往往需要采用精馏。归纳总结了精馏过程中的相关物理化学知识及其应用进展。     

钛醇盐电化学合成的研究

采用钛金属为“牺牲”阳极,首次在无隔膜电解槽中,电化学一步法制备了纳米TiO~2前驱体钛醇盐Ti(OEt)~4,Ti(OPr-i)~4,Ti(OBu)~4。产物通过元素分析、红外光谱(FT-IR)、拉曼光谱进行表征。电化学一步法直接制备纳米材料前驱体钛醇盐,克服了传统化学方法合成金属醇盐步骤多、产率低、纯度达不到要求及后续分离繁琐等缺点。本文同时讨论了影响电合成钛醇盐的关键因素及可能的反应机理,实验表明钛在醇溶液中呈点蚀行为,钛醇盐卤化物Ti(Ⅲ)(OR)~nBr~m在阳极形成,然后被氧化为Ti(Ⅳ)(OR)~nBr~m,这种物质在阴极上ROH参与下被还原生成钛醇盐Ti(OR)~4,钛阳极表面拉曼光谱证实了上述观点。防止阳极钝化,温度控制在50～60℃之间,彩有机胺溴化物为导电盐,可以提高电合成收率。     

氯柱硼镁石的合成及其在20℃水中的溶解相转化动力学研究

报道了合成氯柱硼镁石的快捷方法及该复盐在20℃水中的溶解和相转化过程.结果表明:该复盐在水中呈现不同步溶解,首先溶脱掉MgCl2·6H2O,生成中间产物MgO·B2O2·4H2O,随后发生转化,最终转化产物是2MgO·3B2O2·15H2O.拟合出了溶解转化结晶动力学方程,提出了溶解转化结晶反应机制.     

盐生盐杆菌生长过程热动力学研究

用 LKB2 2 77生物活性检测系统测定了盐生盐杆菌 R1、J7、S9以及 R1和 J7的融合子 F9生长的产热功率曲线 .根据曲线的特征 ,建立了古生菌生长过程的热动力学方程 :ln[P· ( 1 -P/Pm) r- 1 ]=ln[P0 · ( 1 -P0 /Pm) r- 1 ]+k· t.由此求得了盐生盐杆菌的生长速率常数 ,并对此模型和融合子 F9的生长进行了讨论 .该热动力学方程描述了一系列非理想的细菌生长过程的产热功率曲线 ,并将其与经典的指数式生长模型和 lo-gistic模型进行了比较 ,它具有更广泛的适用性 .首次报道了微量热技术在古生菌中的应用     

梳形抗盐聚合物在聚合物驱油中的应用

三次采油技术已成为我国提高原油采收率的主要措施之一。研制新型高效驱油用聚合物是降低成本,提高采油量的关键。目前国内外研制的新型高效驱油用聚合物主要为两性聚合物、耐温耐盐单体共聚物、疏水缔合聚合物、复合(或多元组合)型聚合物、共混聚合物和梳形聚合物等。     

Synthesis and Ionic Conductivity of Network Polymer Electrolytes with Internal Plasticizers

Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.     

Influence of Reactive Diluent on UV-curing of Acrylate Terminated Hyperbranched Polymers

A Aeries of hydroxylic hyperbranched polymers were derived from 2,2-bis (methylol) propionic acid and tris (methylol) propane reacted with acrylic acid to various extents. The obtained acrylated hyperbranched polymers alone or with a monofunctional diluent, isobornylene acrylate(IBOA) were further cured by UV radiation. The cured films based on the modified polymers alone all demonstrated poor mechanical properties due to their high network densities and low moving ability of polymer chains. For the composite systems, the cured films demonstrated improved mechanical properties due to the low network densities and high chain moving ability. With more IBOA included in the systems, acrylate groups can react to a higher extent during the curing process.     

Synthesis, Characterization and Two-Photon Absorption Properties of a Novel Pyridinium Salt

A novel pyridinium salt, 2,4-bis[p-(N,N-dimethylamino)styryll-N-metlayl pyridinium iodide (BMSPI) was synthesized and characterized by TG, ^1H NMR spectroscopy and elemental analysis, and the reaction process was studied by using ES-MS. When BMSPI was pumped by a pulsed 1064 nm, 50 ps laser beam, it manifests highly efficient TPA (Two-Photon Absorption) and up-conversion superradiance. The up-conversion efficiency was 6.0% at the pump energy of 4-6 mJ and the lifetime of two-photon fluorescence was measured as 59 ps.