Absorption measurement of strained SiGe nanostructures deposited by UHV-CVD

In order to obtain a low band gap photocell based on the widely spread silicon technology, e.g. for thermophotovoltaics, SiGe nanostructures can be introduced into a monocrystalline silicon photocell. Beforehand, it is necessary to know the absorption coefficient of the SiGe quantum wells. On a silicon (1 0 0) substrate multiple Si/SiGe quantum well structures were grown by UHV-CVD. The Ge concentration and the well width were used as growth parameters. To obtain significant absorption, the experiment was set up to allow for 200 internal reflections.The total reflection of the light results in a standing electromagnetic wave. The absorption coefficient was obtained from the experimental data taking the geometry and the electric field distribution in the absorbing layer into account. The influence of well width and germanium content on the absorption was investigated with the goal of maximizing the absorption for photons with energies below the band gap energy of silicon. The measurement results are compared with a theoretical model, which takes the band structure of strained SiGe including confinement effects into account.     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

Cellulose-polyamide 66 blends. Part II: Mechanical behavior

Blends of the natural polymer cellulose with a synthetic polymer, polyamide 66, are studied in order to determine if the expected strong interaction between them, due to hydrogen bonds, could improve their mechanical properties such as strength and elongation at break. In a previous work {Part I, J. Polym. Sci. Polym. Phys., 32 , 1437 (1994)}, the preparation technique and the characterization of cellulose-polyamide 66 (PA66) blends were described in detail. Several samples in the composition range between 0 to 70 wt % of PA66 were carefully dried and examined using dynamic mechanical and tensile tests. Based on previous work a new percolation model has been developed. It takes both linear and nonlinear mechanical behaviors into account and allows for the effect of adhesion between material domains. From comparison between experimental and predicted data, it is concluded that a partial miscibility between the amorphous phases of cellulose and PA66 exists and is responsible for a strong adhesion at their interface. Solid-state ¹³C nuclear magnetic resonance has also been used to study these samples and supports the existence of strong interactions between both homopolymers. © 1995 John Wiley & Sons, Inc.     

Circularly polarized light-induced electrogyration in the Au nanoparticles on the ITO

We have found that the gold nanoparticles on the ITO substrates might be considered promising materials for circularly polarized light-induced linear electrogyration (EG). The maximal achieved value of the EG susceptibility described by third-order axial tensor caused by probe circularly polarized light at a wavelength of 1060 nm was equal to about 13 deg/mm at pulsed electric field strength 30.0 V/cm with a duration of about 1 ms. We have revealed that the maximal EG coefficient is achieved for the samples possessing maximal resistivity. The investigated composites possess long-lived EG grating which decreases by not more than 12% after 120 min of laser treatment. Applying a non-circular pump light leads to the diminishing of the observed EG.     

Controllable synthesis of ZnS/PMMA nanocomposite hybrids generated from functionalized ZnS quantum dots nanocrystals

We reported controllable synthesis of ZnS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of zinc chloride (ZnCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand were well dispersed in H₂O/dimethylformamide solution without any aggregation. In addition, the Mn-doped ZnS nanocrystals (NCs) were synthesized with similar method. Then, ZnS-PMMA hybrids were obtained via free radical polymerization in situ by using ZnS NCs functionalized with methacryloxypropyltrimethoxysilane (MPS). FT-IR characterization indicates the formation of robust bonding between ZnS NCs and the organic ligand. The TEM images show that ZnS NCs are well dispersed in PMMA matrix, and particle size of as-prepared ZnS NCs is about 2.6 nm, in agreement with the computing results of Brus’s model and Debye–Scherrer formula. The photoluminescence measurements present that ZnS NCs, Mn-doped ZnS NCs, and ZnS/PMMA hybrid show good optical properties.     

Characterisation of oxygen defects in calciumdifluoride

We study the aggregation of oxygen dipoles well dispersed in a CaF₂ crystal upon annealing at temperatures ranging from 370 to 420 K. The concentration of oxygen dipoles is monitored by measuring the intensity of the ionic thermocurrent peak as well as by absorption and luminescence spectroscopies. Results from three methods agree within experimental error and yield an activation energy of (1.2±0.1) eV for the diffusion of isolated oxygen centres in the crystal.     

Ferromagnetic Properties of Bond-Dilution and Random Positive or Negative Uniaxial Anisotropy Blume-Capel Model

We study the ferromagnetic properties of spin-1 system, which is considered in the frame of the bond dilution and random positive or negative anisotropy Blume-Capel model in the effective field theory and a cutting approximation. The investigation of phase diagrams displays some rich properties of the trajectory of tricritical point, reentrant henomena at low temperatures. Under certain both bond concentrations and random negative anisotropy, there are new transition lines of double tricritical points. So special emphasis is placed on the influence of the bond dilution and random anisotropy on phase diagrams. The magnetizations of the system are also discussed. Some results have not been evealed in previous reports.     

Recent results from large electron positron collider

We summarize here the recent results from the four experiments at the large electron positron collider (LEP). These experiments provide precise measurements of theW and Z boson properties and their couplings to leptons and quarks. These measurements, together with measurements of the top quark andW boson masses in the Tevatron collider provide a stringent test of the standard electroweak theory. Searches for Higgs boson and supersymmetric particles have yielded null results so far giving rise to lower bounds in the parameter space.     

Anomalies of attenuation and phase velocity of surface acoustic waves in YBa2Cu3O7‒δ thin films in the vicinity of Tc

We present measurements of the attenuation and phase velocity of surface acoustic waves in thin YBa₂Cu₃O films as a function of temperature, in magnetic fields up to 3.6 T applied parallel to the c-axis of the films. We have observed anomalies in both, the attenuation and the phase velocity in the vicinity of the superconducting critical temperature which do not depend on the magnetic field. Possible origins of these anomalies, observed, to our knowledge, for the first time in YBa₂Cu₃O thin films, are discussed and compared to bulk acoustic wave experiments. We present a kind of feedback technique for surface acoustic waves which improves the sensitivity of this type of measurement. The actual sensitivity limits are mentioned. Received: 7 August 1997 / Revised: 7 November 1997 / Accepted: 17 November 1997