Voltammetric, chronocoulometric and spectroelectrochemical studies of electropolymerized films based on Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine: effect of high pH

Electropolymerized thin films of Co(III/II)- and Zn(II)-4,9,16,23-tetraaminophthalocyanine, immersed in solutions of relatively high pH, have been studied electro- and spectroelectrochemically. Cyclic voltammetry and chronocoulometry were used to characterize films deposited on glassy carbon electrodes. Spectroelectrochemistry and ellipsometry measurements were performed on indium tin oxide (ITO) surfaces coated with the zinc and cobalt complexes and correlated to the electrochemical information collected using glassy carbon electrodes. Studies at high pH are motivated by the efficient increase in luminol chemiluminescence at high OH⁻ concentration, and by potential application in luminescence sensors. Although the films are not removed, some structural changes occur when they are exposed to solutions of high pH. In addition, an estimation of the number of monolayers has also been calculated. The atomic diameters of cobalt and zinc are very close in value, but the estimated number of monolayers, based on cyclic voltammetric data, for a given number of electropolymerization cycles is approximately four-fold higher in the zinc-based film. This would correspond to three-fold thicker films when zinc is the central metal ion. Ellipsometry measurements have been correlated with cyclic voltammetric data to confirm that film thickness varies among the different complexes, even though the conditions of electropolymerization are the same.     

Effects of double substitution on the thermodynamic stabilities of nitrogen radicals

Ｓｔｕｄｉｅｓｏｎｋｉｎｅｔｉｃｓｏｆｒａｄｉｃａｌｒｅａｃｔｉｏｎｓ[1]ａｎｄｏｎＣＨｂｏｎｄｄｉｓｓｏｃｉａｔｉｏｎｅｎｅｒｇｉｅｓ(ＢＤＥ)[2]ｈａｖｅｓｈｏｗｎｔｈａｔｃａｒｂｏｎｒａｄｉｃａｌｓａｒｅｓｔａｂｉｌｉｚｅｄｂｙｅｉｔｈｅｒａｎｅｌｅｃｔｒｏｎｄｏｎａｔｉｎｇｇｒｏｕｐ(ＥＤＧ)ｏｒａｎｅｌｅｃｔｒｏｎｗｉｔｈｄｒａｗｉｎｇｇｒｏｕｐ(ＥＷＧ),ａｎｄｔｈａｔｉｆａｃａｒｂｏｎｒａｄｉｃａｌｉｓｓｕｂｓｔｉｔｕｔｅｄｗｉｔｈｂｏｔｈａｎＥＤＧａｎｄａｎＥＷＧａｔｔｈｅｓａｍｅｃｅｎ…     

Complexation of Al(III) by 8-Hydroxyquinoline and Drastic Fluorescence Enhancement in Reverse Micelles

Complexation of Al^IIIby 8-hydroxyquinoline and fluorescence behavior of the quinolinate(s) were studied in reverse micellar systems at low water content, and compared to aqueous media. Two surfactants were used: one was cationic (CTAC: cetyltrimethylammonium chloride) and the other was anionic (AOT: sodium bis(2-ethylhexyl)sulfosuccinate). The results obtained in the CTAC/dichloromethane system (W= [H₂O]/[surfactant] = 0.9) showed that complexation occurred very likely in the oil phase and no micellar effect was observed. On the contrary, in the presence of AOT, specific micellar effects were observed due to the presence of the anionic polar heads: stabilization of the positively charged 1:1 and 1:2 chelates, at the expense of the neutral water-insoluble 1:3 chelate which is formed in aqueous solutions under similar conditions;drastic fluorescence enhancement factorsof 120 and 100 in AOT/heptane (W= 1.5) and AOT/dichloromethane (W= 1.6), respectively. Such factors have never been reported so far in either hydroorganic or direct micellar systems. In return, the length of time for the production of the complex(es) is increased because of the microheterogeneity of the medium and the small sizes of the water pools.     

Photoacoustic spectroscopy of solids and surfaces

After briefly reviewing the theory and instrumentation, results from a variety of experiments carried out by the authors on the photoacoustic spectroscopy of solids and surfaces by employing an indigenous spectrometer are discussed in the light of the recent literature. Some of the important findings discussed are, phase angle spectroscopy, anomalous behaviour of monolayers, unusual frequency dependence in small cell volumes, spectra of a variety of solids including amorphous arsenic chalcogenides, photoacoustic detection of phase transitions and determination of surface areas and surface acidities of oxides. Recent developments such as piezoelectric photoacoustic spectroscopy, depth profiling and subsurface imaging are also presented. Contribution No. 124 from the Solid State and Structural Chemistry Unit.     

Aldol condensations over reconstructed Mg-Al hydrotalcites: structure-activity relationships related to the rehydration method

Two different rehydration procedures in the liquid or gas phase have been applied to reconstruct mixed oxides derived from calcined hydrotalcite-like materials to be used as catalysts for aldol condensation reactions. The as-synthesized hydrotalcite, its decomposition product, as well as the reconstructed solids upon rehydration were characterized by XRD, N(2) adsorption, He pycnometry, FTIR, SEM, TEM, (27)Al MAS-NMR and CO(2)-TPD (TPD=temperature-programmed desorption). Compared to the Mg-Al mixed oxide rehydrated in the gas phase (HT-rg), that rehydrated in the liquid phase (HT-rl) exhibits a superior catalytic performance with respect to the aldol condensation of citral with ketones to yield pseudoionones and in the self-aldolization of acetone. The textural properties of HT-rl and HT-rg differ strongly and determine the catalytic behavior. A memory effect led to a higher degree of reconstruction of the lamellar structure when the mixed oxide was rehydrated in the gas phase rather than in the liquid phase, although liquid-phase rehydration under fast stirring produced a surface area that was 26 times greater. This contrasts to typical statements in the literature claiming a higher degree of reconstruction in the presence of large amounts of water in the medium. CO(2)-TPD shows that the number of OH(-) groups and their nature are very similar in HT-rg and HT-rl, and cannot explain the markedly different catalytic behavior. Accordingly, only a small fraction of the available basic sites in the rehydrated samples is active in liquid-phase aldol condensations. Our results support the model in which only basic sites near the edges of the hydrotalcite platelets are partaking in aldol reactions. Based on this, reconstructed materials with small crystallites (produced by exfoliation during mechanical stirring), that is, possessing a high external surface area, are beneficial in the reactions compared to larger crystals with a high degree of intraplatelet porosity.     

Photoreaction of 2′-chloro-4-R-benzanilide: synthesis of 2-(4-R-phenyl)-1,3-benzoxazole and 9-R-phenanthridin-6(5H)-one (R=H, CH3, CH3O)

The UV photolysis of 2′-chloro-4-R-benzanilides in acetonitrile solution under nitrogen atmosphere leads to the formation of intramolecular photocyclization products (9-R-phenanthridin-6(5)-one, 20–30%), along with the minor photoreduction, photo-Fries, and intramolecular photosubstitution products. The photoreaction of 2′-chloro-4-R-benzanilide in acetonitrile solution containing 10% of water or aqueous sodium hydroxide however gives 2-(4-R-phenyl)-1,3-benzoxazole as a major product (30%) along with the photoreduction, photo-Fries and intramolecular photocyclization products.     

氧化锌脱硫中氢和氧的双气氛效应及动力学研究

用热重法研究了氧化锌脱硫中氢氧的气氛效应以及氢氧共同存在下氧化锌脱硫的微观动力学行为。实验温区为200 ℃～320 ℃，氧化锌粒度为100目～120目。研究结果表明，在0%～40%的体积浓度范围内，氢可促进脱硫反应进行；氧则由于会引起氧化锌表面析硫使得脱硫过程随其浓度的变化复杂化。氢氧双气氛下，氧化锌脱硫动力学行为可用改良收缩核模型进行描述，表面反应活化能和固体扩散活化能分别为14.96 kJ/mol和46.77 kJ/mol。     

The Substituent Effects of tert-Butyl Radical Addition to 2-Substituted Allyl Chlorides

The relative rates for the addition reactions of tert-butyl radical to 2-substituted ally chlorides I have een determined. The correlation of log k/k₀, vs. σ_m gives a ρ mvalue of 3.59 with correlation coefficient of 0.930. When the substituent CH₂Cl is excluded, correlation coefficient raises to 0.990 and ρ value becomes 3.39. The large p value and the deviation of relative rate of substituent CH₂C1 are discussed.     

高分辨等离子体质谱法直接测定高纯镓中的痕量元素

建立高分辨电感耦合等离子体质谱法(HR-ICP-MS)测定高纯镓样品中Be、Mg、A l、S i、Ti、V、Cr、Mn、Fe、Co、N i、Cu、Zn、Ge、As、Mo、Ag、Cd、In、Sb、Ba、Pb、B i等痕量元素的方法。样品用HNO3 HC l经微波消解后,试液直接进样用HR-ICP-MS法同时测定上述元素,在高分辨质谱测量模式下避免了大量的质谱干扰,详细地研究了HC l和高纯镓所产生的基体效应,以Sc、Rh、Tl作为内标元素校正了基体效应,讨论和确定了实验的最佳测定条件。结果表明,23种痕量元素的检出限在0.001~0.21μg/L之间;回收率在89.8%~111.6%之间,相对标准偏差(RSD)小于3.3%。