碳纤维增强摩阻材料的摩擦磨损特性研究

利用Ｄ－ＭＳ摩擦磨损试验机研究了自制的碳纤维增强摩阻材料的碳纤维含量、表面状态、强度及长度对其摩擦磨损性能的影响．结果表明：碳纤维含量对摩阻材料的摩擦磨损性能有显著影响,低含量时主要起减摩作用,高含量时主要起抗犁削作用;经过表面改性的碳纤维与粘结剂结合强度较高,能改善摩阻材料的摩擦磨损性能,高强度碳纤维增强摩阻材料具有较好的摩擦磨损性能;碳纤维长度对摩阻材料的摩擦磨损性能和加工性能具有一定的影响．     

Near‐infrared spectroscopic studies on the cure behaviors of the CAE/DGEBA blend system initiated by a thermal latent catalyst

The latent properties and cure behaviors of an epoxy blend system based on cycloaliphatic epoxy (CAE) and diglycidyl ether of bisphenol A (DGEBA) epoxy containing N‐benzylpyrazinium hexafluoroantimonate (BPH) as a thermal latent initiator were investigated with near‐infrared (N‐IR) spectroscopy. The assignments of the latent properties and cure kinetics were performed by the measurements of the N‐IR reflectance for epoxide and hydroxyl functional groups at different temperatures and compositions. As a result, this system showed more than one type of reaction, and BPH was an excellent thermal latent catalyst without any coinitiator. The cure behaviors were identified by the changes in the absorption intensity of the hydroxyl groups at 7100 cm⁻¹ with different composition ratios. Moreover, characteristic N‐IR band assignments were used to evaluate the reactive kinetics and were shown to be an appropriate method for studying the cure behaviors of the CAE/DGEBA blend system containing a thermal latent catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 326–331, 2001     

Phase‐transition characteristics of amphiphilic poly(2‐ethyl‐2‐oxazoline)/poly(ε‐caprolactone) block copolymers in aqueous solutions

Amphiphilic diblock and triblock copolymers of various block compositions based on hydrophilic poly(2‐ethyl‐2‐oxazoline) (PEtOz) and hydrophobic poly(ε‐caprolactone) were synthesized. The micelle formation of these block copolymers in aqueous media was confirmed by a fluorescence technique and dynamic light scattering. The critical micelle concentrations ranged from 35.5 to 4.6 mg/L for diblock copolymers and 4.7 to 9.0 mg/L for triblock copolymers, depending on the block composition. The phase‐transition behaviors of the block copolymers in concentrated aqueous solutions were investigated. When the temperature was increased, aqueous solutions of diblock and triblock copolymers exhibited gel–sol transition and precipitation, both of which were thermally reversible. The gel–sol transition‐ and precipitation temperatures were manipulated by adjustment of the block composition. As the hydrophobic portion of block copolymers became higher, a larger gel region was generated. In the presence of sodium chloride, the phase transitions were shifted to a lower temperature level. Sodium thiocyanate displaced the gel region and precipitation temperatures to a higher temperature level. The low molecular weight saccharides, such as glucose and maltose, contributed to the shift of phase‐transition temperatures to a lower temperature level, where glucose was more effective than maltose in lowering the gel–sol transition temperatures. The malonic acid that formed hydrogen bonds with the PEtOz shell of micelles was effective in lowering phase‐transition temperatures to 1.0M, above which concentration the block copolymer solutions formed complex precipitates. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2400–2408, 2000     

风沙环境下钢结构涂层低角度冲蚀特性研究

针对风沙环境中钢结构涂层长期受冲蚀,涂层破坏直接降低钢结构体系耐久性的现状,采用能模拟风沙环境的气流挟沙喷射法对钢结构涂层试件进行了低角度冲蚀试验,用失重测量法测定涂层冲蚀失重量与沙剂量和冲击速度关系,进而评定冲蚀程度,用扫描电镜(SEM)观测分析涂层冲蚀区的微观形貌来分析冲蚀机理,并提出了涂层冲蚀程度评价计算公式.结果表明:涂层冲蚀失重量随沙剂量和冲击速度的增大而增加;低角度冲蚀主要为微切削作用,材料硬度起决定因素,高角度冲蚀主要为冲蚀挤压变形作用,材料韧性起决定作用,由于涂层材料硬度低而韧性高,故在低冲角下其受冲蚀程度严重;验证了评价计算公式用于评价涂层冲蚀程度的可靠性.研究结果将为准确评价风沙区钢结构体系耐久性提供依据.     

跨膜浓度梯度对渗透压囊泡循环活性的调控

本文通过分析囊泡在膨胀状态与孔隙状态的动力学行为,揭示调控膨胀拉伸能与孔隙势能的内在物理参量.建立递推微分方程的分析模型,该模型提供了膨胀-破裂循环特征量膨胀系数在各个循环中初始跨膜浓度梯度依赖性的定量信息.研究得出,通过增加初始跨膜浓度梯度,可加快膨胀系数增长速率(循环数为1时,初始跨膜浓度梯度增加3倍,膨胀系数增长速率增加2.65倍);随着循环数的增多,膨胀系数的增长由线性转变为非线性.此外,初始跨膜浓度梯度与循环次数密切相关,我们的模型计算预测增加初始跨膜浓度梯度可实现循环次数的增多.研究结果为靶组织以可编程方式释放活性生物治疗剂的发展提供了具有实际意义的理论依据.     

Preparation and controlled degradation of oxidized sodium alginate hydrogel

Degradation is often a critical property of materials utilized in tissue engineering. Although alginate, a naturally derived polysaccharide, is an attractive material due to its biocompatibility and ability to form hydrogels, its slow and uncontrollable degradation can be an undesirable feature. In this study, the degradation behavior of hydrogel based on oxidized sodium alginate (OSA) crosslinked with Ca²⁺ was studied in phosphate buffer solution (PBS, pH = 7.4) and Tris-(hydroxymethyl) aminomethane–HCl (Tris–HCl, pH = 7.4) at 37 °C. The degradation behavior of OSA hydrogels with different degrees of oxidation was evaluated as a function of degradation time by monitoring the changes of molecular weight and weight loss. It was found that the degradation behavior relied heavily on the degree of oxidation and the surrounding medium. This result indicates that the degradation rates of OSA hydrogels can be controlled by changing the degree of oxidation.     

双螺杆冻胶纺丝法制备有机液体吸附功能纤维及其性能研究

在聚合釜中合成了BMA/HEMA二元共聚树脂,利用双螺杆纺丝机、采用冻胶纺丝技术制备了有机液体吸附功能纤维,研究了单体投料比中HEMA质量分数对纤维各种溶胀行为的影响,利用动态热机械分析仪(DMA)对纤维的动态力学性能进行了研究,同时利用环境扫描电子显微镜(SEM)观察了纤维的表面和断面形貌.结果表明,HEMA引入大分子后,所得纤维对有机液体甲苯、三氯乙烯具有吸附功能,且吸附过程符合sigmoidal模型中的Hill方程;随HEMA质量分数的增加,纤维对甲苯和三氯乙烯的饱和吸附量增大,对甲苯和三氯乙烯的最大吸附量分别可达10g/g和21g/g;随HEMA质量分数的增加,纤维剩余率增加的同时,使纤维对甲苯和三氯乙烯的握持能力增强;HEMA质量分数对纤维动态力学性能有突出影响,特别是链段运动受其影响更为明显;HEMA质量分数对纤维表面和断面形貌均有显著影响,特别是当HEMA质量分数为15wt%时,所得纤维表面出现了许多空洞,其断面存在许多尺寸不均的空洞.     

Growth behavior of CuPc films by physical vapor deposition

Various Cu‐phthalocyanine (CuPc) films were grown from physical vapor deposition on top of indium‐tin‐oxide glass substrates by controlling substrate temperature (T_sub), source temperature (T_sou), and growth time. From side‐view SEM pictures, the growth rates for these CuPc films are estimated and can be categorized into three regions. From the Arrhenius plot of growth rate versus 1/T_sub, the activation energy E_A can be obtained. As T_sou = 390 °C, for region (A) with T_sub < 140 °C, the growth of CuPc films is dominated by the adhesion process with E_A = 810 meV. For region (B) with 140 °C < T_sub < 320 °C, the growth is then limited by the steric character associated with the organic molecular solids with E_A = 740 meV. For region (C) with T_sub > 320 °C, the re‐evaporation of the CuPc adhered molecules from the interface becomes dominant. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

On the microstructures of ethyl acetate/monoolein/water

A phase diagram, describing the behavior of the polar lipid monoolein (MO), water, and ethyl acetate (EtAc), is here presented as well as results from small angle X-ray scattering. MO is found to have a solubility of 60 wt.% in EtAc at 20 °C. No macroscopic aggregation of MO can, initially, be detected in the binary MO/EtAc solution even though MO forms solid crystals in concentrated samples when times goes by. In case of the ternary system small amounts of water, mainly bound to the lipid head groups, can be incorporated in the liquid EtAc/MO phase as water has a limited solubility in EtAc. For EtAc/water mass ratios below 2/3 EtAc is present into the reversed bicontinuous cubic and lamellar phases present in the binary MO/water system. To conclude, EtAc is mainly partitioned to the lipid membranes, with minor effects on spontaneous curvature. Hence, simple EtAc-addition has an effect similar to dehydration. For EtAc/water ratios above 2/3 the liquid crystalline phases dissolve. The phase behavior is here discussed in view of related phase behaviors for water-miscible solvent/MO/water systems. For instance, an interpretation of the swelling behavior of the sponge phase (L₃), present in the water-miscible solvent(s)/MO/water systems, shows that solvents partitioned to the polar domains strongly increases the spontaneous curvature of the MO-films. The reason is probably weaker hydrophobic interactions in interfacial regions. As expected, in case of water-miscible solvents, the ternary phase behaviors can be understood by consider water and water-miscible solvent as one “mixed solvent”.