Tribological behaviors of DLC films in sulfuric acid and sodium hydroxide solutions

Tribological behaviors of three typical kinds of diamond-like carbon (DLC) films (a-C, a-C:Cr, and a-C:H) in sulfuric acid and sodium hydroxide solutions were investigated. The a-C film showed the lowest stable coefficients of friction (COF) in both sulfuric acid and sodium hydroxide solutions but the worst wear resistance in sulfuric acid solution. The a-C:H film showed the highest COF in sulfuric acid solution and the best wear resistance in both sulfuric acid and sodium hydroxide solutions. The a-C:Cr film exhibited superior comprehensive tribological performance in sulfuric acid solution, while in sodium hydroxide solution, high COF and very poor wear resistance was observed. What is more, friction and wear mechanism was revealed by investigating the friction-induced material evolutions on the sliding surface.     

Towards a consistent mechanism of emulsion polymerization—new experimental details

The application of atypical experimental methods such as conductivity measurements, optical microscopy, and nonstirred polymerizations to investigations of the ‘classical’ batch ab initio emulsion polymerization of styrene revealed astonishing facts. The most important result is the discovery of spontaneous emulsification leading to monomer droplets even in the quiescent styrene in water system. These monomer droplets with a size between a few and some hundreds of nanometers, which are formed by spontaneous emulsification as soon as styrene and water are brought into contact, have a strong influence on the particle nucleation, the particle morphology, and the swelling of the particles. Experimental results confirm that micelles of low-molecular-weight surfactants are not a major locus of particle nucleation. Brownian dynamics simulations show that the capture of matter by the particles strongly depends on the polymer volume fraction and the size of the captured species (primary free radicals, oligomers, single monomer molecules, or clusters).     

Adsorptive Voltammetric Behaviors of Resveratrol at Graphite Electrode and its Determination in Tablet Dosage Form

The adsorptive voltammetric behavior of resveratrol was studied at a graphite electrode in B‐R buffer (pH = 6.0) solution using adsorptive cyclic voltammetric technique. The oxidation of resveratrol is an irreversible adsorption controlled process. The oxidation mechanism was proposed and discussed in this work. The dependence of the current on pH and the concentration and nature of buffer were investigated to optimize the experimental conditions for the determination of resveratrol. It was found that in the range of 8.0 × 10^?9 ～ 2.0 × 10^?6 mol/L, the currents measured by differential pulse voltammetries presented a good linear property as a function of the concentrations of resveratrol. In addition, validation parameters, such as reproducibility, sensitivity and recovery were evaluated as well. The proposed method was also successfully applied for the determination of resveratrol in Chinese patent medicine with good results.     

新型两性聚电解质高吸水性树脂CMCTS-g-（PAA-co-PTMAAC）的制备研究

通过氧化还原引发荆引发的接枝共聚反应,使阴离子型单体丙烯酸(AA)和阳离子型单体三甲基烯丙基氯化铵(TMAAC)在羧甲基壳聚糖(CMCTS)的分子链上接枝共聚,制得羧甲基壳聚糖接枝-(聚丙烯酸-co-聚三甲基烯丙基氯化铵)(CMCTS-g-(PAA-co-PTMAAC)两性聚电解质高吸水性树脂.采用红外光谱对产物的结构进行了表征,比较了反应条件对产物吸液性能的影响.发现制备具有良好吸液性能的高吸水性树脂的最优化反应条件为:TMAAC占单体总质量的14.3%,mNNMBA/mAA值在0.014附近,单体总质量为CMCTS质量的9.33倍,丙烯酸中和度在20%～30%之间.研究发现,随外部溶液pH值的变化,两性聚电解质高吸水性树脂的溶胀性能在酸性和碱性条件下各有一个最大值,在等电点处产物的吸液性相对较低.     

直链型与支链型疏水缔合水凝胶的机械性能与溶胀行为

以丙烯酰胺(AM)为亲水单体,脂肪醇聚氧乙烯醚丙烯酸酯(AEO-AC-n-m,n为疏水端烷基链碳的数目,m为亲水端PEG链的长度,n,m=13,5;10,5;13,10)为疏水单体,十二烷基硫酸钠(SDS)为表面活性剂,过硫酸钾(KPS)为引发剂,通过胶束聚合制备了3种聚丙烯酰胺-co-脂肪醇聚氧乙烯醚丙烯酸酯(AM-co-AEO-AC)疏水缔合水凝胶.以疏水烷基链为直链的疏水单体AEO-AC-13-5合成的直链型水凝胶的网络结构均匀且强度高,其形态在水中可维持180 d.而以疏水烷基链为支链的疏水单体AEO-AC-10-5与AEO-AC-13-10合成的支链型水凝胶的机械性能较弱,60 d内即溶解于水中.在相同条件下,直链型水凝胶断裂时的最大应力是支链型水凝胶的4~5倍.利用弹性橡胶理论中的新胡克方程计算了直链型和支链型水凝胶的有效交联密度ν0和有效交联点间的分子量Mc.     

Influences of Bis-(2,6-Diisopropylphenyl) Carbodiimide on the Thermal Stability and Crystallization of Poly(P-Dioxanone)

The influences on the thermal degradation and crystallization behaviors of poly(p-dioxanone) (PPDO) were initially investigated by adding bis-(2,6-diisopropylphenyl) carbodiimide (labeled as St). It was found that the addition of St could significantly enhance the thermal stability and crystallizability of PPDO. The thermal decomposition temperature of PPDO increased with the increase of the amount of St added. The thermal decomposition activation energies of PPDO increased from 94.2 to 130.8 kJ mol^?1 in the case of 5 wt% St. The addition of St did not change the crystal structure of PPDO, while it increased the number of nucleation sites and improved the crystallizability of PPDO. The crystallization activation energies, calculated by the Kissinger method, for PPDO and PPDO/5 wt% St were ?111.4 and ?141.5 kJ mol^?1, respectively, confirming the crystallizability of PPDO was enhanced after the addition of St.     

强电解质凝胶的溶胀平衡与体积相变

以作者近年来对强电解质凝胶的研究结果为中心,介绍了磺酸基凝胶和丙烯酸基凝胶在纯水,缓冲溶液中溶胀比与电荷密度的关系及其差异,揭示了磺酸基凝胶中的反离子凝聚现象和在有机溶剂中体积相变,还讨论了体积相变的滞后现象及其成因,最后就体积相变的驱动力,统一认识电解质和离聚体以及有关的实验结果阐述了作者的见解。     

碳纤维增强摩阻材料的摩擦磨损特性研究

利用Ｄ－ＭＳ摩擦磨损试验机研究了自制的碳纤维增强摩阻材料的碳纤维含量、表面状态、强度及长度对其摩擦磨损性能的影响．结果表明：碳纤维含量对摩阻材料的摩擦磨损性能有显著影响,低含量时主要起减摩作用,高含量时主要起抗犁削作用;经过表面改性的碳纤维与粘结剂结合强度较高,能改善摩阻材料的摩擦磨损性能,高强度碳纤维增强摩阻材料具有较好的摩擦磨损性能;碳纤维长度对摩阻材料的摩擦磨损性能和加工性能具有一定的影响．