Effect of Interfacial Adsorption on the Stability of Thin Polymer Films in a Solvent-induced Process

The stability of ultrathin polymer films plays a crucial role in their technological applications. Here, we systematically investigated the influence of interfacial adsorption in physical aging and the stability of thin polymer films in the solvent-induced process. We further identify the stability mechanism from the theory of thin film stability. Our results show that the aging temperature and film thickness can strongly influence the stability of thin PS films in acetone vapor. Physical aging can greatly improve the stability of thin polymer films when the aging temperature T_(aging1)T_g. A thinner PS film more quickly reaches a stable state via physical aging. At short aging time, the formation of the adsorbed layer can reduce the polar interaction; however, it slightly influences the stability of thin polymer films in the solvent-induced process. At later aging stage,the conformational rearrangement of the polymer chains induced by the interfacial effect at the aging temperature T_(aging1) plays an important role in stabilizing the thin polymer films. However, at T_(aging2)T_g, the process of physical aging slightly influences the stability of the thin polymer films.The formation of the adsorbed layer at T_(aging2) can reduce the short-range polar interaction of the thin film system and cannot suppress the instability of thin polymer films in the solvent-induced process. These results provide further insight into the stable mechanism of thin polymer films in the solvent-induced process.     

Simulation study on cooperation behaviors and crowd dynamics in pedestrian evacuation

Pedestrian evacuation is actually a process of behavioral evolution. Interaction behaviors between pedestrians affect not only the evolution of their cooperation strategy, but also their evacuation paths-scheduling and dynamics features. The existence of interaction behaviors and cooperation evolution is therefore critical for pedestrian evacuation. To address this issue, an extended cellular automaton(CA) evacuation model considering the effects of interaction behaviors and cooperation evolution is proposed here. The influence mechanism of the environment factor and interaction behaviors between neighbors on the decision-making of one pedestrian to path scheduling is focused. Average payoffs interacting with neighbors are used to represent the competitive ability of one pedestrian, aiming to solve the conflicts when more than one pedestrian competes for the same position based on a new method. Influences of interaction behaviors, the panic degree and the conflict cost on the evacuation dynamics and cooperation evolution of pedestrians are discussed. Simulation results of the room evacuation show that the interaction behaviors between pedestrians to a certain extent are beneficial to the evacuation efficiency and the formation of cooperation behaviors as well. The increase of conflict cost prolongs the evacuation time. Panic emotions of pedestrians are bad for cooperation behaviors of the crowd and have complex effects on evacuation time. A new self-organization effect is also presented.     

聚乙烯醇硫酸钾水凝胶电机械化学行为研究

通过将交联聚乙烯醇硫酸酯化的方法制备了一种新型电刺激响应性聚乙烯醇硫酸钾(PVSK)智能水凝胶,并探讨了溶液离子强度和pH对PVSK水凝胶的溶胀吸水率、机械性能以及电机械化学行为的影响.结果表明,制备的PVSK水凝胶的平衡溶胀比随NaCl溶液离子强度的增大而减小,在pH2.39～10.83范围内基本不受溶液pH的影响;经不同离子强度和pH的NaCl溶液充分溶胀的PVSK水凝胶具有良好的机械性能,在非接触的直流电场作用下,该水凝胶向电场负极弯曲,凝胶的弯曲速度和弯曲偏转量随外加电场强度的增加而增大,随NaCl溶液离子强度的增大出现临界最大值,但不随溶液pH(2.08～10.53)的改变而改变;在循环电场作用下,PVSK水凝胶的电机械化学行为具有良好的可逆性.     

Time and poling history dependent energy storage and discharge behaviors in poly(vinylidene fluoride-<Emphasis Type="Italic">co</Emphasis>-hexafluoropropylene) random copolymers

 We studied cycle time (0.01–10 s with triangular input waves) and poling history (continuous versus fresh poling) dependent electric energy storage and discharge behaviors in poly(vinylidene fluoride-co-hexafluoropropylene) [P(VDF-HFP)] films using the electric displacement ― the electric field (D-E) hysteresis loop measurements. Since the permanent dipoles in PVDF are orientational in nature, it is generally considered that both charging and discharging processes should be time and poling history dependent. Intriguingly, our experimental results showed that the charging process depended heavily on the cycle time and the prior poling history, and thus the D-E hysteresis loops had different shapes accordingly. However, the discharged energy density did not change no matter how the D-E loop shape varied due to different measurements. This experimental result could be explained in terms of reversible and irreversible polarizations. The reversible polarization could be charged and discharged fairly quickly (< 5 ms for each process), while the irreversible polarization depended heavily on the poling time and the prior poling history. This study suggests that it is only meaningful to compare the discharged energy density for PVDF and its copolymer films when different cycle times and poling histories are used.     

疏水/亲水性大孔聚二乙烯基苯/聚丙烯酰乙二胺互贯网络的合成及对水溶液中双酚A的吸附研究

采用分步悬浮聚合法制备了由大孔聚二乙烯基苯和聚丙烯酸甲酯组成的聚合物互贯网络(Interpenetrating polymer networks IPN),经过乙二胺氨解,得到由疏水性的大孔聚二乙烯基苯和亲水性的聚丙烯酰乙二胺组成的聚合物互贯网络(polydivinylbenzene/polyacrylethylenediamine IPN即PDVB/PAEM IPN),测定了合成的IPN的物理和化学结构,研究了PDVB/PAEM IPN对pH 6.5的水溶液中双酚A (Bisphenol A即BPA)的吸附性能.结果表明,合成的PDVB/PAEM IPN是含有氨基和酰胺基的多孔性IPN;树脂对水溶液申双酚A的等量吸附焓在20kJ/mol～50kJ/mol之间;动态吸附及脱附实验表明,湿态PDVB/PAEM IPN树脂对水溶液中双酚A的饱和吸附量达到约30mg/mL.树脂可以通过乙醇再生.     

Analysis of viscosity abnormalities of polyelectrolytes in dilute solutions

It was found that the interface effects in viscous capillary flow influenced the process of viscosity measurement greatly,and the abnormal viscosity behaviors of polyelectrolytes as well as neutral polymers in dilute solution region were ascribed to interface effect.According to this theory,we have reviewed the previous viscosity data of derivatives of poly-2- vinylpyridine reported by Maclay and Fuoss first.Then,the abnormal viscosity behaviors of a series of sodium polystyrene sulfonate samples with various molecular weights in dilute aqueous solutions were studied further.The solute adsorption behaviors and structural information of polymers have been discussed carefully.     

几种高性能纤维束的冲击动力学性能实验研究

利用直拉式Hopkinson装置研究了碳纤维、无碱E玻璃纤维、Kevlar 4 9/96 4 /96 4c、Twaron2 0 0 0、DyneemaSk6 6等纤维的动态拉伸性能。与准静态加载条件下相比 ,纤维束的拉伸强度基本与应变速率无关(玻璃纤维除外 ) ,而纤维束的弹性模量和失效应变随应变率的升高而明显变大。从高分子物理以及两种无机纤维的内部微观结构特征对纤维的力学性能与加载速率的关系进行了初步的物理阐释。讨论了实验数据的发散原因。     

RUIN PROBABILITY IN A SEMI-MARKOV RISK MODEL WITH CONSTANT INTEREST FORCE AND HEAVY-TAILED CLAIMS

In the present paper, we consider a kind of semi-Markov risk model （SMRM） with constant interest force and heavy-tailed claims~ in which the claim rates and sizes are conditionally independent, both fluctuating according to the state of the risk business. First, we derive a matrix integro-differential equation satisfied by the survival probabilities. Second, we analyze the asymptotic behaviors of ruin probabilities in a two-state SMRM with special claim amounts. It is shown that the asymptotic behaviors of ruin probabilities depend only on the state 2 with heavy-tailed claim amounts, not on the state 1 with exponential claim sizes.     

Electroactive shape memory cyanate/polybutadiene epoxy composites filled with carbon black

Electroactive shape memory composites were synthesized using polybutadiene epoxy(PBEP) and bisphenol A type cyanate ester(BACE) filled with different contents of carbon black(CB). Dynamic mechanical analysis(DMA), scanning electron microscopy(SEM), electrical performance and electroactive shape memory behavior were systematically investigated. It is found that the volume resistivity decreased due to excellent electrical conductivity of CB, in turn resulting in good electroactive shape memory properties. The content of CB and applied voltage had significant influence on electroactive shape memory effect of developed BACE/PBEP/CB composites. Shape recovery can be observed within a few seconds with the CB content of 5 wt% and voltage of 60 V. Shape recovery time decreased with increasing content of CB and voltage. The infrared thermometer revealed that the temperature rises above the glass transition temperature faster with the increase of voltage and the decrease of resistance.