Preparation and electrochemical properties of graphene‐supported Si‐TiO2 nanospheres as anode material for Li‐ion batteries

Graphene‐supported Si‐TiO₂ (Si‐Ti‐GE) composites have been synthesized by a simple polymerization and sintering method. In the Si‐Ti‐GE composites, many small Si‐TiO₂ particles are scattered on the graphene sheet, which can mitigate the agglomeration of the material and further reduce the particle size. The initial discharge capacities of Si‐TiO₂, Si‐Ti‐GE‐1, Si‐Ti‐GE‐2, and Si‐Ti‐GE‐3 are 336.9, 337.2, 339.8, and 356.6 mAh g⁻¹ at the current density of 200 mA g⁻¹, respectively. The discharge rate capacities of TiO₂, Si‐TiO₂, and Si‐Ti‐GE‐3 composites retain 57.5%, 41.7%, and 82.1% at the current density from 100 to 400 mA g⁻¹, respectively. Therefore, the introduction of graphene not only could facilitate the Li⁺ diffusion and electron transport but also could make better electrical conductivity.     

相分离聚合法:(Ⅱ)二乙氨基乙基型共聚功能微球的合成

<正> 随着生物工程高技术的发展,功能高分子微球作为一类新的功能高分子材料已得到十分广泛的应用。然而关于最难以合成的粒径在微米级、粒度分布窄的高分子微球合成的报道至今仍很少。本文报道了用相分离法(即静止的分散聚合法)合成含有DEAE基团的高分子微球的研究。探讨了单体、交联剂、引发剂及聚合温度、聚合时间等聚合条件对生成微球的影响。相分离聚合法的特点是利用了随着在聚合过程中单体的逐渐聚合,分子量长大,聚合体与反应体系间相容性变差而最终分相成球的原理,因而所形成的微球粒度圆,粒径比较均一。与一般的分散聚合法相比不仅生成微球的粒径较大,且不需要搅拌,使反应装置得以简化。     

Synthesis of Poly(methyl methacrylate) Nanosize Particles by Differential Microemulsion Polymerization

Poly(methyl methacrylate) nanosize particles were synthesized by a differential microemulsion polymerization process. Sodium dodecylsulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of reaction conditions on the particle size have been investigated. A particle size of less than 20 nm in diameter has been achieved with surfactant/monomer and surfactant/water weight ratios of 1:18 and 1:120, i.e. much milder conditions than those previously reported in the literature.

TEM image of nanoparticles prepared via differential microemulsion polymerization.     

Polystyrene-supported recyclable palladacycle catalyst for Heck, Suzuki and Sonogashira reactions

A new type of soluble polystyrene-supported palladium complex as an excellent and recyclable palladacycle catalyst was discovered for carboncarbon bond formation in Heck, Suzuki and Sonogashira reactions. Precipitation and filtration process for recycling the catalyst was also achieved.     

Synthesis and characterization of polysiloxane–polyamide block and graft copolymers

The synthesis of copolymers constituted of a central polydimethylsiloxane (PDMS) block flanked by two polyamide (PA) sequences is described. α, ω-diacyllactam PDMS, when used as macroinitiator of lactam polymerization, gives rise to the expected triblock copolymer. Likewise, PDMS-g-PA graft copolymers are obtained from acyllactam containing polysiloxanes. NaAlH₂(OCH₂CH₂OMe)₂ turns out to be the best suited activating agent for the polymerization of ?-caprolactam, in the experimental conditions required for the synthesis of polysiloxane–polyamide copolymers. The nucleophilic species formed by reaction of NaAlH₂(OCH₂CH₂OMe)₂ with ?-caprolactam—2-[bis(methoxyethoxy) aluminumoxy]-1-azacycloheptane sodium—is indeed nucleophilic enough to bring about the growth of PA chains and mild enough to stay inert towards PDMS. © 1993 John Wiley & Sons, Inc.     

Synthetic process to control the total size and component distribution of multilayer magnetic composite particles

A new synthetic process to prepare composite particles with multilayers, comprised of usual polymer latices, ultra-fine magnetic particles, and a polystyrene layer was examined under various solution conditions.First, the synthetic conditions of heterocoagulates, consisted of polystyrene latices (2a=180900 nm) and NiO·ZnO·Fe₂O₃ particles (2a=20 nm), were investigated as a function of medium pH, particle concentration, and particle size ratio, based on the concept of the heterocoagulation theory as applied by Harding et al. Regular heterocoagulates were generated under suitable medium and mixing conditions, and that their total size can be controlled by selecting the size of the original polymer latices used as the core.Second, the best encapsulation condition of the heterocoagulates via emulsion polymerization with polystyrene monomer was surveyed. The encapsulation of the heterocoagulates was greatly promoted by pretreatment with oleate molecules, although there is no tendency for the encapsulation when the surfactant-free bare heterocoagulates are used as the core.     

Carbenium ion pairs on silica: UV-spectroscopic and electrokinetic measurements of triarylmethylium/halide-aerosil in 1,2-dichloroethane

The interaction of carbenium ion pairs with silica is studied by means of UV-spectroscopy, electrokinetic and adsorption measurements using triphenylmethyl derivatives, (RC₆H₄)₃CX, (X=F, Cl, Br, SCN, OH; R=Cl, I, H, CH₃, C(CH₃)₃, OCH₃, N(CH₃)₂) in interaction with silica particles suspended in 1,2-dichloroethane. The adsorption of triarylmethyl-halides onto silica is accompanied by the heterolytic dissociation of the tertiary carbonhalogen bond. The degree of ionization depends on the basicity of the counter anion and acidity of the cation, respectively. The influences of both concentration and structure of triarylmethyl halides on the zeta-potential are discussed with regard to steric and electronic factor. The zeta-potential values of the adsorbates decrease significantly, as compared with the free silica surface, from a certain triarylmethyl halide concentration where ionization takes place, to a constant level which is characteristic of the carbenium ion pair. These constant zeta-potential values of the adsorbates depend on the basicity of the counter ion and the _p Hammett constants of the ring substitutents, with exclusion of sterically hindered substituents and salt derivatives, e.g., crystal violet and malachite green.     

Triblock copolymers based on cyclic ethers: Preparation and properties of tetrahydrofuran and 3,3-bis(azidomethyl) oxetane triblock copolymers

Novel energetic thermoplastic elastomers (TPEs) based on tetrahydrofuran (THF) and 3,3-bis (azidomethyl) oxetane (BAMO) were prepared in this present study by cationic living polymerization. A bifunctional catalyst, triflic anhydride [(CF₃SO₂)₂)O] was selected to be an initiator for the polymerization THF and BAMO. The resulting polymers were characterized by IR, NMR, and DSC, which demonstrated that triblock copolymers with A-B-A type were formed. The polymers were indicated from thermogravimetric analysis (TGA) to have decomposed at approximately 243°C. The decomposition enthalpies were determined by DSC. These enthalpies were varied with the poly-BAMO contents of the copolymers. The synthesized polymers exhibited relatively good mechanical properties and thermoplastic characteristics at room temperature. © 1994 John Wiley & Sons, Inc.     

Molecular imprinted polymer-based chemiluminescence imaging sensor for the detection of trans-resveratrol

Sensitive, rapid and inexpensive chemiluminescence (CL) imaging has been developed based on molecular imprinted polymer (MIP) sensing elements. Imprinted uniform microspheres were synthesized by precipitation polymerization. Microtiter plates (96 wells) were coated with polymer microspheres imprinted with trans-resveratrol, which were fixed in place using poly(vinyl alcohol) (PVA) as glue. The amount of polymer-bound trans-resveratrol was quantified using imidazole (IMZ)-catalyzed peroxyoxalate chemiluminescence (PO-CL) reaction. The light produced was then measured with a high-resolution CCD camera. Calibration curve corresponding to analyte concentration ranging from 0.3 to 25 μg mL⁻¹ was obtained with a limit of detection 0.1 μg mL⁻¹. These results showed that the MIP-based CL imaging sensor can become a useful analytical tool for quick simultaneous detection of trans-resveratrol in a large number of real samples.     

How the interplay of different control mechanisms affects the initiator efficiency factor in controlled radical polymerization: An investigation using organometallic Mo-based catalysts

Compound CpMoI₂(iPr₂dad) (iPr₂dad = iPrNCHCHNiPr), obtained by halide exchange from CpMoCl₂(iPr₂dad) and NaI, has been isolated and characterized by EPR spectroscopy, cyclic voltammetry, and X-ray crystallography. Its action as a catalyst in atom transfer radical polymerization (ATRP) and as a spin trap in organometallic radical polymerization (OMRP) of styrene and methyl acrylate (MA) monomers has been investigated and compared with that of the dichloro analogue. Compound CpMoCl₂(iPr₂dad) catalyzes the ATRP of styrene and MA with low efficiency factors f (as low as 0.37 for MA and ethyl 2-chloropropionate as initiator), while it irreversibly traps the corresponding growing radical chains under OMRP conditions. On the other hand, compound CpMoI₂(iPr₂dad) has a greater ATRP catalytic activity than the dichloro analogue and yields f = 1 for MA and ethyl 2-iodopropionate as initiator. Under OMRP conditions, it does not irreversibly trap the growing radical chains. This comparison serves to illustrate the general principle that low initiator efficiency factors, sometimes observed in ATRP, may result from the interplay of the ATRP and OMRP mechanisms, when the latter ones involves an irreversible radical trapping process.