New coordination catalysts based on rare earth compounds for polymerization of 1-octene

The study of rare earth coordination catalysts for polymerization of 1-octene has been successfully carried out for the first time. Some features and kinetic behavior of polymerization of 1-octene by Nd(naph)₃–AIEt₃ catalyst system in tetrachloro-methane are described. The overall polymerization activation energy E_a measured was 74.5 kJ/mol and the rate equation could be expressed as R_p = k_p [Nd] [M] (k_p = 3.21 × 10^?3 L/mol s, at 50°C). The catalytic activity of various rare earth elements in Ln (naph)₃ and ligands in NdL₃ for the polymerization was compared. A 1-octene oligomer with double bonds was obtained. It is either a white or pale yellow waxy semi-solid. Its number-average molecular weight is about 10³ and the molecular weight distribution is less than 2.     

Selective alkylation and Suzuki coupling as an efficient strategy for introducing functional anchors to the ethylene-bis(indenyl) ligand

Chiral ansa-ethylene-bis(indenyl)-metal complexes, EBI-MX₂, are useful pre-catalysts for a wide variety of reactions, including hydrogenations, hydrosilylations, and polymerization reactions. In order to immobilize these complexes onto heterogeneous supports, a new methodology was developed to introduce functional anchors to the ethylene-bis(indenyl) ligand, EBI. This was accomplished by selective alkylation of indene to form toluene-4-sulfonic acid 2-(3H-inden-1-yl)-ethyl ester, which was then used to alkylate 6-bromoindene. The selective introduction of an aryl bromide then undergoes coupling reactions with aryl borates via the Suzuki coupling to efficiently introduce an alkenyl or alcohol, functional anchor in a simple four step synthesis.     

Effect of silica-type sol-gel carrier’s structure and morphology on a supported Ziegler-Natta catalyst for ethylene polymerization

Silica xerogels with different structures and morphology, synthesized using a sol-gel procedure, were used as a carrier of vanadium catalysts (VOCl₃/AlEt₂Cl) for ethylene polymerization. Two techniques of catalyst synthesis were applied: slurry impregnation and gas-phase adsorption and the relevant polymerization methods were then employed. The effect of the carrier structure and morphology on the vanadium loading in the catalysts, the catalyst’s activity and kinetic stability were investigated.     

硅氧聚合度对细胞毒性的影响

本文采用家兔肺泡巨噬细胞(AM)存活率和细胞过氧化脂质(LPO)值为测定指标,研究了硅氧的聚合度对其细胞毒性的影响。结果表明:各种聚合度的硅氧都有一定的细胞毒性,聚合度愈大,细胞毒性也愈大。胶体SiO_2的粒径增大,其细胞毒性降低。十硅酸盐及粒径小于5nm的硅溶胶的细胞毒性大于α-石英。聚合度小于6的低聚硅酸及其盐、粒径18nm以上的硅溶胶以及硅胶H的毒性皆小于α-石英。本实验细胞存活率降低和过氧化脂质值升高的趋势基本一致,这表明硅氧可能主要与细胞表面膜作用,膜上磷脂等表面活性物质被氧化和变性,从而导致细胞损伤。     

团聚纳米SiO_2在苯乙烯乳液聚合过程中的再分散过程及机理

用二氧化硅 (SiO2 )存在下的乳液聚合法制备了聚苯乙烯 (PSt) 纳米SiO2 复合材料 ,研究了苯乙烯(St)乳液聚合过程中团聚纳米SiO2 的解离与再分散过程及分散的机理 .发现商品纳米SiO2 粒子以团聚体形式存在 ,团聚体大小远超出纳米级范围 .随聚合时间的延长 ,St的转化率逐渐增加 ,而PSt SiO2 复合微胶囊的粒径逐渐减小 ,反应 12 0min后 ,转化率和复合微胶囊粒子的粒径趋于稳定 .透射电镜 (TEM)也显示PSt SiO2 复合微胶囊粒子具有海岛结构 ,而SiO2 粒子的粒径在纳米范围内 ,表明在乳液聚合过程中SiO2 团聚体被逐渐解离 ,并重新分散到纳米尺度 .红外光谱研究发现 ,在乳液聚合过程中 ,除生成PSt均聚物外 ,还在纳米SiO2 表面生成了PSt接枝共聚物 ,改善了无机纳米粒子与聚合物之间的界面相容性 .聚合过程中的反应热和剪切搅拌是团聚体被解离和重新分散的主要原因 ,而生成的聚合物起到隔离作用     

STUDY ON STYRENE-BUTADIENE BLOCK COPOLYMER FOR THE MODIFICATI0N OF TIRE TREAD

This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed     

Synthesis and spectroscopic studies of methoxy-substituted phenylthienylnicotinamidines

Abstract

Five thienylnicotinamidine derivatives 5a–e were prepared from their corresponding nicotinonitriles 3a–e on treatment with lithium trimethylsilylamide [LiN(TMS)₂] followed by hydrolysis using ethanolic/HCl (gas). The nicotinonitriles 3a–e were prepared via Suzuki coupling reaction of bromothienyl derivative 1 with the appropriate phenylboronic acids 2a–e. The DFT calculation was used to optimize the geometric structure of the newly synthesized nicotinamidines. The comparison of DFT/B3LYP calculated spectral data (¹H-NMR and ¹³C-NMR) with the experimental data showed acceptable agreement. Mass fragmentation patterns of 3,4-dimethoxyphenyl, 3,5-dimethoxyphenyl, and 3,4,5-trimethoxyphenyl thienylnicotinamidine derivatives were investigated.     

Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

Controlled alternating copolymerization of St with MAh in the presence of DBTTC

The copolymerization of styrene (St) with maleic anhydride (MAh) performed at 22 °C in the presence of dibenzyl trithiocarbonate exhibits controlled nature evidenced by: narrow molecular weight distribution, controlled molecular weight and first-order polymerization kinetics. The composition analysis of the copolymers obtained by ¹³C NMR spectra shows the molar fraction of St in obtained copolymers is almost equal to 0.5 throughout the copolymerization. The sequence structure of the copolymer was obtained from DEPT experiments by recording the spectra at π/4 and 3π/4, and then combining them together, the results showed that the copolymers obtained possessed well-defined alternating structure. The experiment shows that charge-transfer-complex formed from St and MAh participates in both initiation and chain growth throughout the copolymerization.     

反相乳液聚合制备壳聚糖接枝共聚物及应用

以壳聚糖、丙烯酰胺、甲基丙烯酰氧乙基三甲基氯化铵为原料,硝酸铈铵为引发剂,Span-20为乳化剂,通过反相乳液聚合技术,合成壳聚糖阳离子接枝共聚物。分析讨论了乳化剂用量、引发剂浓度、油水体积比、单体配比、反应时间、反应温度对共聚物接枝率的影响,并采用正交试验方法对合成条件进行了优化。研究了其对重金属离子Cu2 、Cd2 、Zn2 的吸附性能。结果表明,在Cu2 、Cd2 、Zn2 的混合离子体系中,该共聚物对Cu2 、Zn2 有选择性吸附。