反相离子对高效液相色谱法测定母粉及母液中的杀鼠新

用反相离子对高效液相色谱法测定了杀鼠新母粉及母液中有效成份含量。采用Partisil-10ODS色谱柱，以甲醇：离子对溶液＝80：20（体积比）为流动相，离子对溶液为0.005mol/L四丁基铵磷酸盐（pH为7.5)的缓冲溶液，测定波长285nm。方法在0.025-0.15g/L范围内有很好的线性关系。杀鼠新母粉和母液的相对标准偏差分别为1.24%、0.77%(n=7)，回收率分别为：母粉,97.7%-99.8%；母液，98.5%-100.4%。     

莠灭净悬浮剂物理稳定性

通过颗粒平均粒径测定和形貌表征研究了分散剂种类和用量对莠灭净悬浮剂物理稳定性的影响。 结果表明,相同条件下,双子型分散剂马来松香聚氧丙烯-氧乙烯醚磺酸盐（SC-3）可以在农药颗粒表面形成双层吸附,产生双层屏蔽结构,有效阻隔了颗粒与水的接触,抑制了颗粒团聚和奥氏熟化引起的结晶长大。 其用量(质量分数)大于4.0%时,所制备的莠灭净悬浮剂热贮前后颗粒粒径及形貌基本不变,其结晶长大现象得到有效地抑制,体系物理稳定性较好。     

CaO和NaCl焙烧混合稀土精矿过程中的分解反应

用XRD和TG-DTA热分析技术, 研究了含独居石和氟碳铈镧矿的混合稀土精矿在100～1000 ℃焙烧过程中, 添加CaO, NaCl时, REPO4和REFCO3的分解反应. 研究结果表明: 不添加CaO和NaCl时, 仅在377～450 ℃范围内存在REFCO3的分解反应, 其产物是REOF, RE2O3, 以及Ce2O3进一步的氧化产物CeO2, 而REPO4不分解; 添加CaO后在660～750 ℃之间, CaO有3种分解作用: (1) CaO分解REPO4, 其产物是RE2O3和Ca3(PO4)2. (2) CaO分解REOF, 其产物是RE2O3和CaF2. (3) CaO和REOF的分解产物CaF2共同作用分解REPO4, 其分解产物为RE2O3, Ca5F(PO4)3; 添加CaO, NaCl后, 混合精矿的分解率明显提高, NaCl的作用是为反应体系提供了液相, 促进了固相反应物间的传质过程, 加快了反应速度. 与此同时NaCl还可能参加了CaO分解REPO4的反应.     

固体进样一直接测汞仪法测定金精矿粉中微量汞

将金精矿粉样品直接置于石英舟中,在高纯氧气氛中燃烧,释放出汞,与齐化管中的金形成金汞齐,于900℃热释放出汞蒸汽,用直接测汞仪法测定汞的含量。测定结果的相对标准偏差为0．28％～1．57％（n=6）,方法检出限为1．0pg／kg,加标回收率为95．7％～117．4％。用该法对4种土壤标准样品进行了测定,测定结果与标准值相符。该方法适合于金精矿粉中微量汞的测定。     

稳定同位素比质谱法测定苹果和浓缩苹果汁的δ13C值

用从国际原子能机构溯源得到的橄榄油标准物质[Cat No.B 2172-Batch 3130,其δ13CPDB为(-28.51±0.16)‰]作标准,应用稳定同位素比质谱法测定了苹果和苹果汁的δ13 C值,并以此确定国产苹果的δ13 C值的范围和鉴定制成的果汁的质量。苹果样品去皮后切碎,打成糊状,离心后取其上清液,在75℃加热2～3h至呈黏稠状液体,冷却至室温。此时其糖度约为70Brix。浓缩苹果汁样品是黏稠液体,其糖度一般也在70Brix左右。取2μL上述样品置于锡杯中,按方法处理后供质谱分析。标准物质的进样量为2μL。按所测得碳的稳定同位素13C与12C的比值代入所给公式计算δ13 C值。结果表明:方法的精密度较好,其相对标准偏差(n=11)均小于0.021%。根据测定结果发现,我国苹果的δ13C值在-29.1‰～-23.33‰之间。     

Preparation of a new Cu(II)-imprinted polymer and its application for the determination of trace copper in water samples by flame atomic absorption spectrometry

A new Cu(II)-imprinted polymer has been prepared for selective solid-phase extraction of Cu(II) prior to its determination by flame atomic absorption spectrometry. Two functional monomers, 4-(methacryloylamino)benzamide and 4-vinylpyridine, formed a complex with Cu(II) ion through coordination interactions. The self-assembled Cu(II)-monomer complex was copolymerised via bulk polymerisation method in the presence of ethyleneglycoldimethacrylate cross-linker. In order to remove Cu(II) ions, the resulting polymer was washed with 1.0 M HNO₃ and then with water until obtaining a neutral pH. The ion imprinted polymer was characterised by Fourier transform infrared. The experimental conditions were optimised for solid-phase extraction of Cu(II) using a column of ion-imprinted polymer (IIP). Quantitative retention was achieved between pH 5.0 and 7.0, whereas the maximum recovery for the non-imprinted polymer (NIP) was about 74% at pH 7.0. The IIP showed higher selectivity to Cu(II) in comparison to the NIP. The IIP also exhibited excellent selectivity for Cu(II) in the presence of other metal ions. The relative standard deviation and limit of detection (3s) of the method were 1.6% and 1.8 µg L^?1, respectively. The method was verified by analysis of two certified reference materials (CWW-TM-D and SRM 3280) and then applied to the determination of Cu(II) in seawater and lake water samples and haemodialysis concentrates.     

气基磁化焙烧回收包头稀土尾矿中铁的研究

试验采用磁化焙烧-磁选的方法来回收包头稀土尾矿中的Fe。考察了还原球团的粒径、焙烧温度、还原气体的成分、还原气气体流量、焙烧时间对于磁化焙烧回收Fe的影响。在焙烧温度为580℃,CO与CO2的浓度比为40∶60,还原气体气流量为1.2 L·min-1,焙烧时间为60 min的条件下对球团进行磁化焙烧,并将焙烧后的球团进行磨矿,使得-200目的物料占物料总重量的95%。将磨矿后的物料置于磁场强度为233 k A·m-1的磁选管中进行磁选,可以得到品位为60%左右的铁精矿,其铁回收率达到70%左右。     

电感耦合等离子体原子发射光谱法(ICP-AES)测定铜渣精矿中杂质含量

采用电感耦合等离子体发射光谱法测定了铜渣精矿中砷、锑、铋、铅、锌、镁的量。其测定范围:ω(As):0.05%~0.45%,ω(Sb):0.07%~0.30%,ω(Bi):0.01%~0.20%,ω(Pb):1.00%~4.50%,ω(Zn):1.00%~4.50%,ω(Mg):0.10%~1.00%。经加标回收实验,各元素的加标回收率为92%~104%(n=3),相对标准偏差(RSD)小于5%(n=11)。方法准确快速可靠,适用于铜渣精矿中砷、锑、铋、铅、锌、镁量的同时测定.     

Rheological behavior of silica suspensions in aqueous solutions of associating polymer

Associating polymers are hydrophilic long-chain molecules containing a small amount of hydrophobic groups. The aqueous solutions show viscoelastic responses above some critical concentrations because a three-dimensional structure is formed by association of hydrophobic groups. When the associating polymers are added to silica suspensions at low concentrations, the flocculation is induced by bridging mechanisms, and the flow of suspensions become shear-thinning. For suspensions prepared with polymer solutions in which the associating network is developed, the viscosity decreases, shows a minimum, and then increases with increasing particle concentration. The viscosity decrease may arise from the breakdown of associating network due to adsorption of polymer chains onto the silica surfaces. As the particle concentration is increased, the polymer concentration in solution is decreased, and finally, all polymer chains are adsorbed on the surfaces. Beyond this point, the partial coverage of particle surfaces takes place and strong interactions are generated between particles by polymer bridging. Since the stable suspensions are converted to highly flocculated systems, the viscosity is increased and the flow becomes shear-thinning. The concentration effect of silica particles on the viscosity behavior of suspensions can be explained by a combination of viscosity decrease in solution due to polymer adsorption and viscosity increase due to flocculation.     

AN/St悬浮共聚体系中AN在水/油两相间分配及其对共聚物组成的影响

研究了丙烯腈/苯乙烯(AN/St)悬浮共聚体系中AN在水/油两相间的分配及其对AN/St共聚物组成的影响.结果表明,AN分配于水/油两相间,使油相AN的含量低于相同单体配料比的本体聚合,导致生成的AN/St共聚物组成偏离本体共聚.为了准确预测进而控制AN/St悬浮共聚物的组成,提出了在考虑AN相分配的基础上计算AN/St悬浮共聚物组成的模型.计算结果与实验值一致,计算中用到的油相实际竞聚率与本体聚合相同,但该悬浮聚合的表观竞聚率随水/油比的变化而发生较大改变.