An improvement in the bending ability of a hinged trisaccharide with the assistance of a sugar-sugar interaction

Hinged di- and trisaccharides incorporating 2,4-diamino-beta-D-xylopyranoside as a hinge unit (Hin) were synthesized. Bridging of the diamino group of Hin by carbonylation or chelation to a metal ion results in a conformational change from (4)C1 to (1)C4, which in turn causes a bending of the oligosaccharides. In this study, the bending abilities of the hinged oligosaccharides were compared, in terms of the reactivities toward carbonylation and chelation. Di- or trisaccharides containing a 6-O-glycosylated mannopyranoside or galactopyranoside at their reducing ends had bending abilities similar to that of the Hin monosaccharide, probably because there were neither attractive nor repulsive interactions between the reducing and nonreducing ends. However, when Hin was attached at O2 of methyl mannopyranoside (Man alphaMe), the bending ability was dependent on the nonreducing sugar and the reaction conditions. Typically, a disaccharide--Hin beta(1,2)Man alphaMe--was difficult to bend under all the tested reaction conditions, and the bent population in the presence of Zn(II) was only 4%. On the other hand, a trisaccharide--Man alpha(1,3)Hin beta(1,2)Man alphaMe--was bent immediately after the addition of Zn(II) or Hg(II), and the bent population reached 75%, much larger than those of all the other hinged trisaccharides ever tested (<40%). This excellent bending ability suggests an attractive interaction between the reducing and nonreducing ends. The extended conformation was recovered by the addition of triethylenetetramine, a metal ion chelator. Reversible, quick, and efficient bending of the hinged trisaccharide was thus achieved.     

Computer-Assisted Solution of Chemical Problems—The Historical Development and the Present State of the Art of a New Discipline of Chemistry

The topic of this article is the development and the present state of the art of computer chemistry, the computer-assisted solution of chemical problems. Initially the problems in computer chemistry were confined to structure elucidation on the basis of spectroscopic data, then programs for synthesis design based on libraries of reaction data for relatively narrow classes of target compounds were developed, and now computer programs for the solution of a great variety of chemical problems are available or are under development. Previously it was an achievement when any solution of a chemical problem could be generated by computer assistance. Today, the main task is the efficient, transparent, and non-arbitrary selection of meaningful results from the immense set of potential solutions—that also may contain innovative proposals. Chemistry has two aspects, constitutional chemistry and stereochemistry, which are interrelated, but still require different approaches. As a result, about twenty years ago, an algebraic model of the logical structure of chemistry was presented that consisted of two parts: the constitution-oriented algebra of be- and r-matrices, and the theory of the stereochemistry of the chemical identity group. New chemical definitions, concepts, and perspectives are characteristic of this logic-oriented model, as well as the direct mathematical representation of chemical processes. This model enables the implementation of formal reaction generators that can produce conceivable solutions to chemical problems—including unprecedented solutions—without detailed empirical chemical information. New formal selection procedures for computer-generated chemical information are also possible through the above model. It is expedient to combine these with interactive methods of selection. In this review, the Munich project is presented and discussed in detail. It encompasses the further development and implementation of the mathematical model of the logical structure of chemistry as well as the experimental verification of the computer-generated results. The article concludes with a review of new reactions, reagents, and reaction mechanisms that have been found with the PC-programs IGOR and RAIN.     

Traceability and analytical chemistry

 The basic concepts of traceability as they are defined by the Comité Consultatif pour la Cluantité de Matière are contrasted with the practical exploitation in chemical analysis. The applicability of traceability concepts are tested for their practical applicability on four different analytical methodologies, neutron activation analysis, plasma mass spectrometry, beam microscopical analysis and speciation analysis of organometallic compounds. Received: 31 March 1998 · Accepted: 6 June 1998     

有机氟化学的新进展

本文综述氟有机化学的最新进展。论及:1.气溶胶直接氟化法,新的温和的氟化试剂——CH_3CO_2F,N-氟代二氢吡咯酮,R_F(?)(C_6H_5)CF_3SO_3(?)和喷雾干燥的KF。2.合成全氟烷基磺酸的新方法,如全氟烷基碘在金属活化下与SO_2在DMF中的反应,又如I(CF_2)_2O(CF_2)_2SO_2F与C_2F_4调聚和全氟卤代烷的亚磺化脱碘反应。3.惰性—CF_2—及—CF_3的新反应,如五氟一氯丙酮与KF的反应,多氯氟乙烷与硫酚钠的反应。4.具有生理活性的氟化物,如抗癌物fluorosesqisiloxane,杀虫剂29-fluorositosterol。     

Combinatorial synthesis of amino acid- and peptide-carbohydrate conjugates on solid phase

Carbohydrates are useful polyfunctional scaffold molecules which allow the selective attachment of a number of different side chains. The combinatorial solid phase synthesis of diverse amino acid or peptide conjugates of a polyfunctional glucose scaffold based on a set of selectively removable and orthogonally stable protecting groups is described. The resulting carbohydrate-peptide hybrids constitute potential turn mimetics.     

Structural Consequences of S → Se Substitution in some Symmetrical [M(S2CNR2)3] Complexes

The consequences of replacement of the symmetrically chelate ligands in [M(E₂CNR₂)₃] (E = S, Se) complexes of potential 32 symmetry by analogous mixed S,Se unsymmetrical chelates are explored for both small (M = Co) and large (M = In) metal atoms, and R = primary (Et) and secondary (ⁱPr) alkyl substituents by way of low‐temperature single crystal X‐ray studies of [(Co(SSeCNEt₂)₃] ([Co(Se₂CNEt₂)₃] also determined as datum), and [In(SSeCNR₂)₃], R = Et, ⁱPr. The structure of [(ⁱPr₂N·CS·Se)₂] is also recorded.     

CexTi1-xO2复合氧化物的结构及负载CuO对NO还原性能研究

采用共沉淀法制备了不同摩尔比(x=0,0.1,0.2～0.9,1.0)的CexTi1-xO2复合氧化物,考察了CuO/CexTi1-xO2对NO+CO反应的活性,并用BET,TPR和XRD等技术对各试样进行了表征。结果表明,试样的结构和还原特性随焙烧温度变化而变化。XRD检测表明,x值从0.1增加到0.5时,650℃焙烧的试样已形成了CeTi2O6物相,且主要以无定形状态存在;试样经800℃焙烧后晶化完全;x>0.6时,一些TiO2已经进入了CeO2晶格,形成了Ce Ti固溶体。催化剂活性评价表明CuO/CexTi1-xO2(650℃)对NO+CO反应具有较好的活性,其活性随x值变化而变化。TPR及XRD结果表明CuO与CeTi2O6之间存在很强的相互作用,CeTi2O6物相的形成使CuO的还原峰温由380℃提前到200℃,而CuO的存在又促进CeTi2O6的还原峰温从600℃提前至200～300℃。     

Synthesis, biochemical properties and molecular modelling studies of organometallic specific estrogen receptor modulators (SERMs), the ferrocifens and hydroxyferrocifens: evidence for an antiproliferative effect of hydroxyferrocifens on both hormone-dependent and hormone-independent breast cancer cell lines

A series of ferrocene derivatives based upon the structure of the antiestrogenic drug tamoxifen or of its active metabolite hydroxytamoxifen has been prepared and named by analogy ferrocifens and hydroxyferrocifens. This series includes 1-[4-(O(CH(2))(n)NMe(2))phenyl]-1-phenyl-2-ferrocenyl-but-1-ene and 1-[4-(-O(CH(2))(n)NMe(2))phenyl]-1-(4-hydroxyphenyl)-2-ferrocenyl-but-1-ene, with n=2, 3, 5 and 8, and 1-[4-(-O(CH(2))(2)NMe(2))phenyl]-1-(4-hydroxyphenyl)-2-ferrocenylethene. Most of these molecules have been synthesised by McMurry cross-coupling of the appropriate ketones, except for the ethene complexes, which were prepared by a four-step reaction sequence starting from the ferrocenylacetic acid. All these compounds were obtained as mixtures of Z and E isomers. The isomers were separated in the cases of the ferrocenyl derivatives of tamoxifen and hydroxytamoxifen (n=2). No isomerisation of the Z and E isomers occurred in DMSO after one day, while a 50:50 mixture of the isomers was obtained within one hour in chloroform. The X-ray structure of (E)-1-[4-(-O(CH(2))(2)NMe(2))phenyl]-1-(4-hydroxyphenyl)-2-ferrocenyl-but-1-ene has been determined. The relative binding affinity (RBA) values of the hydroxyferrocifens for the estrogen receptor alpha (ERalpha) was good to moderate, with values decreasing progressively with the length of the basic chain. The RBA values found for the estrogen receptor beta (ERbeta) are equal to or slightly less than those found for the alpha form. The lipophilicity of the hydroxyferrocifens are superior to the values found for estradiol and increase with lengthening of the chain. The antiproliferative effects of the four hydroxyferrocifens with n=2, 3, 5 and 8 were studied on four breast cancer cell lines (MCF7, MDA-MB231, RTx6 and TD5) possessing different levels of ERalpha. On MCF7 cells containing high levels of ERalpha, hydroxyferrocifens behave as antiestrogens. At a molarity of 1 microM the effect is close to that of hydroxytamoxifen (used for reference) when n=2 or 5, more marked when n=3, and weaker when n=8. Ferrocene alone has no effect. For the MDA-MB231 cells, classed as a hormone-independent breast cancer cell line, on the other hand, the hydroxyferrocifens show remarkable antiproliferative behaviour while the hydroxytamoxifen is completely inactive. Hydroxyferrocifens therefore show the unique property of being active both on hormone-dependent and on hormone-independent breast cancer cell lines. The molecular modelling study provides some clues for understanding of the antagonist effect of these molecules, while an additional cytotoxic effect due to the vectorised ferrocenyl unit is revealed in some occasions.     

High-pressure structural trends of Group 15 elements: simple packed structures versus complex host-guest arrangements

The Group 15 elements P, As, Sb, and Bi all have layered structures consisting of six-membered rings under ambient conditions and attain the body-centered cubic (bcc) structure at the highest pressures applied. In the intermediate pressure region, however, phosphorus and its heavier congeners behave profoundly differently. In this region P first attains the open packed simple cubic (sc) structure for a wide range of pressures and then transforms into the rarely observed simple hexagonal (sh) structure. For the heavier congeners complex, incommensurately modulated host-guest structures emerge as intermediate pressure structures. We investigated the high-pressure behavior of P and As by ab initio density functional calculations in which pseudopotentials and a plane wave basis set were employed. The incommensurately modulated high-pressure structure of As was approximated by a supercell. Our calculations reproduced the experimentally established pressure stability ranges of the sc and sh structures for P and the host-guest structure for As very well. We found that the sc and especially the sh structure are decisively stabilized by the admixture of d states in the occupied levels of the electronic structure. This admixture releases s-s antibonding states above the Fermi level (s-d mixing). With pressure, s-d mixing increases rapidly for P, whereas it remains at a low level for As. As a consequence, the band energy contribution to the total energy determines the structural stability for P in the intermediate pressure region, giving rise to simple packed structures. On the other hand, in the intermediate pressure region of the heavier Group 15 elements, a delicate interplay between the electrostatic Madelung energy and the band energy leads to the formation of complex structures.