Optical characteristics of subwavelength metallic grating coupled porous film surface plasmon resonance sensor with high sensitivity

A high performance sub-wavelength metallic grating coupled surface plasmon resonance (SWMGCSPR) sensor with metal and porous composite layer is proposed. Rigorous coupled-wave analysis (RCWA) is conducted to prove the design feasibility, characterize the sensor's performance and determine geometric parameters of the structure, which is also employed to compute the electromagnetic (EM) field distributions at the resonant wavelengths. Parameters of sensing platform are optimized to achieve the best performance of the SPR sensor. Obtained results reveal that the proposed structure can excite SPR with negative diffraction order of SWMG. Both wavelength and angular sensitivities are greatly enhanced because surface plasmon wave (SPW) exhibits a large penetration depth which will enlarge the distance of interactions between SP and analytes. The detection sensitivities and quality parameters are estimated to be 700 nm/RIU and 509°/RIU with full width at half maximum (FWHM) less than 2.5 nm using the same optimized structure.     

Optical detection of Cu ion using a SQ-dye containing polymeric thin-film on Au surface

In this study, we have fabricated Cu²⁺ ion sensor using a squarylium dye (SQ-dye) containing polymeric thin-film. Surface Plasmon Resonance (SPR) was used as a signal amplifier to achieve high sensitivity and large linear dynamic range for detection of Cu²⁺ ion. High selectivity to Cu²⁺ ion was obtained by the effective electro-static interaction between SQ-dye and Cu²⁺ ion in the polymeric film. The optimal analytical condition of high selectivity and sensitivity in the wider linear dynamic range obtained in this study may be a result of the cooperative ‘hard-soft’ metal ion-ligand interaction and effective detection of refractive index changes by the complexation of Cu²⁺ ion and SQ-dye in SPR measurement. Among 10 different alkali metal, alkaline earth metal, and transition metal ions, SQ-dye in poly(vinylchloride)–poly(vinyl acetate)–poly(vinyl alcohol) (PVC–PVAc–PVA) copolymer film showed the highest selectivity to Cu²⁺ ion. Although the interaction between SQ-dye and metal ions has not been well understood, both cooperative ‘hard-soft’ metal ion-ligand interaction and size-selective recognition of Cu²⁺ ion to SQ-dye may contribute to high selectivity. Furthermore, additional sensitivity in the detection of Cu²⁺ ion by SPR was obtained by matching the wavelength of probing radiation of SPR and absorption maximum of SQ-dye at 675 nm, which allow to detect small changes in the refractive index by complex formation on the sensing surface. This result may apply in development of the Cu²⁺ ion selective sensor for medical, biochemical, and environmental applications.     

Study of molecular interactions between lipids and proteins using dynamic surface tension measurements: a review

Molecular interactions between small molecules and proteins, such as binding of lipids to proteins, are of fundamental importance in various biological processes. A recently-developed method based on dynamic surface tension measurement is efficient and versatile in detecting such molecular interactions: Axisymmetric Drop Shape Analysis (ADSA) provides a tool for measuring the surface tension (γ) response to surface area changes. Through the analysis of the γ response pattern, surface competitive adsorption between small organic molecules and protein molecules can be detected. Surface squeeze-out of small molecules by proteins can also be observed. Molecular binding of lipids to proteins manifests itself in a modification of the γ response which is not compatible with a simple superposition of the two individual patterns. The specific binding can be studied in terms of dose effects and specificity.     

Surface properties of plasma membrane vesicles isolated from melon (Cucumus melo L.) root cells differing in salinity tolerance

The hypotheses that genotypic differences in salinity tolerance may result from (i) differences in global surface charge density or (ii) from differences in global Ca²⁺ binding were tested. An attempt was made to correlate the differing salinity tolerance of four melon cultivars with surface properties of vesicles extracted from the plasma membrane (PM) of their root cells. Surface characterization involved measurements of electrophoretic mobility and sorption of ⁴⁵Ca²⁺ to the vesicles in the presence of varying concentrations of Ca²⁺, Na⁺ and Mg²⁺. Irrespective of salinity tolerance, vesicles from the four cultivars yielded similar ζ potentials under similar conditions, indicating similar global surface charge densities. Sorption studies with vesicles from two cultivars differing in salinity tolerance predicted independently this result of equal surface charge density. The estimated global binding affinities of Ca²⁺, Na⁺ and Mg²⁺ to the PM of both cultivars were the same with binding coefficients of 50, 0.8 and 9 M⁻¹, respectively. Consequently, the hypotheses enumerated above to interpret genotypic differences in salinity toxicity are rejected. However, vesicles from the salt-resistant strain sorbed 19% more Ca²⁺ per given amount of protein in the membrane, indicating the existence of a larger number of negatively charged surface sites per given amount of protein and a smaller amount of protein per given area of membrane. Genotypic differences in site-specific Ca²⁺-binding affinity (e.g. at ion channels) remain a viable hypothesis for genotypic differences in salinity tolerance.     

Effects of element order and interface reconstruction in FEM/volume‐of‐fluid incompressible flow simulation

In previous studies, the moment‐of‐fluid interface reconstruction method showed dramatic accuracy improvements in static and pure advection tests over existing methods, but this did not translate into an equivalent improvement in volume‐tracked multimaterial incompressible flow simulation using low‐order finite elements. In this work, the combined effects of the spatial discretization and interface reconstruction in flow simulation are examined. The mixed finite element pairs, Q₁Q₀ (with pressure stabilization) and Q₂P _{? 1} are compared. Material order‐dependent and material order‐independent first and second‐order accurate interface reconstruction methods are used. The Q₂P _{? 1} elements show significant improvements in computed flow solution accuracy for single material flows but show reduced convergence using element‐average piecewise constant density and viscosity in volume‐tracked simulations. In general, a refined Q₁Q₀ grid, with better material interface resolution, provided an accuracy similar to the Q₂P _{? 1} element grid with a comparable number of degrees of freedom. Moment‐of‐fluid shows more benefit from the higher‐order accurate flow simulation than the LVIRA, Youngs', and power diagram interface reconstruction methods, especially on unstructured grids, but does not recover the dramatic accuracy improvements it has shown in advection tests. Published 2012. This article is a US Government work and is in the public domain in the USA.     

Synthesis,structure, and biological properties of a Co(II) complex with tridentate Schiff base ligand

A new Co(II) complex of general formula [Co(L)₂] has been synthesized from a NNO tridentate Schiff base ligand, 2-[(piperidin-2-ylmethylimino)-methyl]-phenol (L). The title complex is characterized by elemental, spectroscopic, antibacterial, and single crystal X-ray structural studies. X-Ray crystallography reveals that the complex shows a distorted octahedral geometry around the Co(II) ion. The complex was tested against several bacteria and shows good antibacterial activities against almost all of the bacteria. The interactions of the title complex with calf thymus deoxyribonucleic acid (CT-DNA) have been investigated by electronic absorption and fluorescence spectroscopy, showing that the complex interacts with CT-DNA via partial intercalation. Thermogravimetric analysis (TGA) of the complex has also been reported and the result shows that the complex is thermally stable up to 134 °C.     

Static reanalysis for topological modifications of structures

A procedure for reanalysis of various structures subjected to various topological modifications is presented. The procedure is based on the results of a single exact analysis and the factorization of the stiffness matrix of initial structures. It is suitable for the case of addition of joints, where the number of the degrees of freedom is increased. The method deals with the stiffness matrix of structures directly, so it can be used with a general finite element system. It is shown that the proposed approximation method is most effective in terms of accuracy, efficiency, and ease of implementation.     

SERS decoding of micro gold shells moving in microfluidic systems

In this study, in situ surface‐enhanced Raman scattering (SERS) decoding was demonstrated in microfluidic chips using novel thin micro gold shells modified with Raman tags. The micro gold shells were fabricated using electroless gold plating on PMMA beads with diameter of 15 μm. These shells were sophisticatedly optimized to produce the maximum SERS intensity, which minimized the exposure time for quick and safe decoding. The shell surfaces produced well‐defined SERS spectra even at an extremely short exposure time, 1 ms, for a single micro gold shell combined with Raman tags such as 2‐naphthalenethiol and benzenethiol. The consecutive SERS spectra from a variety of combinations of Raman tags were successfully acquired from the micro gold shells moving in 25 μm deep and 75 μm wide channels on a glass microfluidic chip. The proposed functionalized micro gold shells exhibited the potential of an on‐chip microfluidic SERS decoding strategy for micro suspension array.     

Density, ultrasonic velocity, surface tension, excess volume and viscosity of quaternary fluid solutions

Density, ultrasonic velocity, surface tension, excess volume and viscosity of quaternary non-electrolyte solution n-pentane+tolune+n-heptane+cyclohexane has been experimentally determined at 25 °C over a wide range of composition. Assuming a quaternary fluid solution to be made of six binaries, a statistical approach of Prigogine–Flory–Patterson (PFP) theory has been extended to develop the expressions for dynamic viscosity, surface tension excess volume and ultrasonic velocity of quaternary fluid system. A reasonable agreement has been achieved between theory and experiment. An attempt has also bee made to explain the nature of molecular interactions involved in the light of excess thermodynamic functions whose sign and magnitude depend upon the chain length and size of the component fluids and also studied the role of order breakers (toluene and cyclohexane) on these properties.     

Surface activity and thermodynamic of micellization and adsorption for isooctylphenol ethoxylates, phosphate esters and their mixtures with N-diethoxylated perfluorooctanamide

Three nonionic surfactants; p-isooctylphenol ethoxylates p-[i-OPE10], p-[i-OPE15], and p-[i-OPE20], were phosphorylated to produce three anionic phosphate ester surfactants. In addition, N-diethoxylated perfluorooctanamide (N-DEFOA) was also prepared. The surface and thermodynamic properties of the three types of surfactants and mixtures of the fluorocarbon surfactant (FC) with the hydrocarbon surfactants (HC) have been investigated. Surface tension as a function of concentration of the surfactant in aqueous solution was measured at 30, 40, 50 and 60°C, using the spinning drop technique. From these measurements the critical micelle concentration (CMC), the surface tension at the CMC (γ_CMC), the maximum surface excess concentration (Γ_max), the minimum area per molecule at the aqueous solution/air interface (A_min), and the effectiveness of surface tension reduction (π_CMC), were calculated. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) for these surfactants and their mixtures were also calculated. Structural effects on micellization, adsorption and effectiveness of surface tension reduction are discussed in terms of these parameters. The results show that the FC surfactant and its mixtures with HC surfactants enhance the efficiency in surface tension reduction and adsorption in the mixed monolayer at the aqueous solution/air interface, and also, reduce γ_CMC and the tendency towards micellization.