Validation of an optimization procedure to improve low frequency characteristics of rooms

A set of experiments was carried out to validate an optimization procedure based on finite element method (FEM). The idea of the procedure, fully presented in previous edition of this journal [Zhu X, Zhu Z, Cheng J. Using optimized surface modifications to improve low frequency response in a room. Appl Acoust 2004;65:841-60], is to produce an optimal geometry modification on the wall for improving low frequency sound uniformity in small rooms. Four experimental models were set up with a scale of 1:5. One was modified according to the optimized result and the others were treated with no optimization consideration. Measured frequency responses of four rooms were compared with numerical results calculated by FEM models. The transient responses in these rooms were also measured and analyzed. The agreements between calculation and measurement are satisfactory though the discrepancies due to the uncertainty of acoustic behavior of the room boundaries remain. The optimization procedure has been supported by the results that the optimized room produces the flattest frequency response and also the most smooth energy decay within the frequency range studied. The reductions of response fluctuation have reached 4.3 dB for prediction and 2.6 dB for measurement, respectively.     

Solved and unsolved problems in surface structure determination

The range of surface structural problems of interest in understanding the physics and chemistry of solid surfaces is reviewed with reference to the available methods and their strengths and limitations. Key challenges being addressed currently concern the achievable precision of measurements and their physical and chemical significance, and the complexity of the problems which may be solved. Past progress and future problems are illustrated with a series of examples ranging from the relaxation of simple clean metal surfaces through complex semiconductor reconstructions to large molecular adsorption and coadsorption systems and complex adsorbate-induced reconstructions. The strengths and limitations of scanning tunnelling microscopy as a complement to true quantitative structural methods are discussed, as is the role of chemical state specificity and elemental specificity in solving complex molecular adsorbate systems.     

Band bending at the Si(1 1 1)–SiO2 interface induced by low-energy ion bombardment

Experiments employing photoreflectance spectroscopy have uncovered band bending due to electrically active defects at the Si(1 1 1)–SiO₂ interface after sub-keV Ar⁺ ion bombardment. The band bending of about 0.5 eV resembles that for Si(1 0 0)–SiO₂, and both interfaces exhibit two kinetic regimes for the evolution of band bending upon annealing due to defects healing. The healing takes place about an order of magnitude more quickly at the (1 1 1) interface, however, probably because of less fully saturated bonding and higher compressive stress.     

RESTRICTION RESPECTUEUSE ET RECONSTRUCTION DES CHAINES ET DES RELATIONS INFINITES

We show a faithful restriction theorem among infinite chains which implies a reconstructibility conjecture of Halin. This incite us to study the reconstructibility in the sense of Fraïssé and to prove it for orders of cardinality infinite or ≥ 3 and for multirelations of cardinality infinite or ≥ 7, what improves the theory obtained by G. Lopez in the finite case. For this work we had to study the infinite classes of difference which have to be a linear order of type ω, ω* or ω* + ω; this complete the theory made by G. Lopez for the finite case ([13]). We show also Ulam-reconstructibility for linear orders which have a fixed point.     

On accurate boundary conditions for a shape sensitivity equation method

This paper studies the application of the continuous sensitivity equation method (CSEM) for the Navier–Stokes equations in the particular case of shape parameters. Boundary conditions for shape parameters involve flow derivatives at the boundary. Thus, accurate flow gradients are critical to the success of the CSEM. A new approach is presented to extract accurate flow derivatives at the boundary. High order Taylor series expansions are used on layered patches in conjunction with a constrained least‐squares procedure to evaluate accurate first and second derivatives of the flow variables at the boundary, required for Dirichlet and Neumann sensitivity boundary conditions. The flow and sensitivity fields are solved using an adaptive finite‐element method. The proposed methodology is first verified on a problem with a closed form solution obtained by the Method of Manufactured Solutions. The ability of the proposed method to provide accurate sensitivity fields for realistic problems is then demonstrated. The flow and sensitivity fields for a NACA 0012 airfoil are used for fast evaluation of the nearby flow over an airfoil of different thickness (NACA 0015). Copyright © 2005 John Wiley & Sons, Ltd.     

Sulfur adsorption on Fe(1 1 0): a DFT study

The adsorption of atomic S on the Fe(1 1 0) surface is examined using density functional theory (DFT). Three different adsorption sites are considered, including the atop, hollow and bridge sites and the S is adsorbed at a quarter monolayer coverage in a p(2 × 2) arrangement. The hollow site is found to be the most stable, followed by the bridge and atop sites. At all three sites, S adsorption results in relatively minor surface reconstruction, with the most significant being that for the hollow site, with lateral displacements of 0.09 Å. Comparisons between S-adsorbed and pure Fe surfaces revealed reductions in the magnetic moments of surface-layer Fe atoms in the vicinity of the S. At the hollow site, the presence of S causes an increase in the surface Fe d-orbital density of states between 4 and 5 eV. However, S adsorption has no significant effect on the structure and magnetic properties of the lower substrate layers.     

Implementation and experimental study on fast object modeling based on multiple structured stripes

In this paper, a practical structured light-based system for fast object modeling and reconstruction is reported. The system consists of an off-the-shelf digital projector, a video camera and a turntable. The system calibration is implemented accurately and automatically by taking a single image of an illuminated calibration template. The multiple color light stripes emitted by the projector adopt only three colors and the color can be modified easily according to the surface texture of the object. This makes the system widely applicable in many situations, and the assumption about color neutrality, which is a limitation to other similar systems, can be largely relaxed. The registration and merging algorithm is greatly simplified by employing a turntable. The validity and high accuracy of the method are demonstrated by extensive real experiments.     

How I Do It: Miniplate Reconstruction of the Lateral Thyroid Lamina: One-Stage Restoration of Voice After Teflon Granuloma Resection

This case report describes a one-stage technique for long-term voice restoration and laryngeal reconstruction in the treatment of Teflon (Dupont, Wilmington, Delaware) granuloma. A patient who presented with severe dysphonia underwent resection of a Teflon granuloma via a lateral laryngotomy. A pedicled strap muscle flap was used to reconstruct the paraglottic space. The muscle flap was positioned through the lateral laryngotomy with direct endoscopic visualization of the endolarynx to ensure correct vertical positioning and medialization of the vocal fold. The muscle flap was secured in this position with suture fixation. The trapdoor piece of cartilage that was elevated to create the window in the lateral thyroid lamina was repositioned over the pedicled muscle flap and reinforced with a titanium miniplate, which was secured to the remaining thyroid cartilage. The patient had excellent voice results and has not required revision or augmentation. Reinforcement of the lateral thyroid lamina using titanium miniplate fixation helps to stabilize the muscle pedicle flap and the position of the vocal fold, in this case resulting in good long-term voice results after a single-stage reconstruction.     

Sn/Ge(1 1 1) α-phase: characterization of image resonances by specular electron reflection and selective electron scattering

Image potential resonances on the Sn/Ge(1 1 1) α-phase are investigated by two closely related methods: specular electron reflection and so-called selective electron scattering. Electrons from image resonances are detected on this surface at 120 and 300 K, i.e. below and above the phase transition at about 200 K. The dispersion of the image resonances reveals at these two temperatures equivalent effective electron masses, which are characteristic for this type of electronic surface states. The results of the two methods are consistent according to the similarity of the scattering processes. Changes in the loss peak intensity with the annealing temperature are assigned to the surface quality and are reflected by characteristic photoemission intensities.     

Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.