Surface plasmon polariton scattering by small ellipsoid particles

Scattering of surface plasmon polaritons (SPP’s) by small ellipsoid particles placed near a dielectric–metal interface is theoretically considered. Using the Green’s function formalism and the dipole approximation, we consider the differential and total scattering cross-sections associated with the SPP-to-SPP scattering as well as with the SPP scattering into waves propagating away from the interface, analyzing the influence of system parameters. As an example, scattering cross-sections of differently shaped gold spheroid particles placed near an air–gold interface are evaluated at the light wavelength of 800 nm. It is shown that the differential and total cross-sections depend strongly upon the particle-to-surface distance, the ratio between the major and minor axes and their orientation with respect to both the interface and the direction of SPP incidence. Implications of the obtained results to the design of SPP micro-optical components are also discussed.     

Behavior of zirconium in the ZrOW(100) system at high temperature, studied by ISS, AES and work-function measurements

The behavior of zirconium atoms at the W(100) surface associated with oxygen adsorption at different sample temperatures has been studied by Auger electron spectroscopy (AES), ion scattering spectroscopy (ISS), and the relative change of the work function (Δф) measured by the onset of the secondary electron energy distribution. The results have revealed: (i) adsorption of zirconium onto the W(100) surface followed by the elevation of the sample temperature up to 1710 K in an oxygen partial pressure of 2.7 × 10⁻⁴ induces complete diffusion of zirconium atoms into the W(100) substrate; (ii) further exposure of oxygen induces co-existence of oxygen and tungsten on the surface at 1710 K, resulting in a work function of 4.37 eV; (iii) keeping the sample temperature at 1710 K, simple evacuation of the system has resulted in surface segregation of zirconium atoms to the surface to form a zirconium atomic layer on the top-most surface, reducing the work function to 2.7 eV. The results have revealed that this specific behavior of zirconium atoms at high temperature assures, with very good reproducibility, the highly stable performance and long service life of Zr---O/W(100)-emitters in practical use, even in a low vacuum of 10⁻⁶ Pa.     

Surface tension and density measurements for indium and uranium using a sessile-drop apparatus with glow discharge cleaning

The sessile-drop method is used to measure the surface tension and density of liquid indium and uranium under high vacuum. Measurements are made over the temperature range 156–500°C for In and at the melting point for U. Surface oxides are efficiently removed with a glow discharge system. Drop profiles are captured by photograph and processed using nonlinear regression to yield the surface tension and density. In this regression procedure, normal distances from calculated profiles to data points are minimized. For indium, the density and surface tension measurements yield _mp = 7.05 × 10³kg/m³, d/dT = −0.776 kg/m³·°C, and γ_mp = 0.568 N/m, dγ/dT = −9.45 × 10⁻⁵ N/m·°C. The results for uranium at the melting point are _mp = 17.47 × 10³ kg/m³ and γ_mp = 1.653 N/m.     

等径管道的三维重建

由轮廓线重建物体的现有方法，不能准确地恢复原有管道的形状．本文提出了一种等径管道的三维重建方法，能较为准确地恢复原管道的三维结构．     

Variable resolution triangulations

A comprehensive study of multiresolution decompositions of planar domains into triangles is given. A general model is introduced, called a Multi-Triangulation (MT), which is based on a collection of fragments of triangulations arranged into a directed acyclic graph. Different decompositions of a domain can be obtained by combining different fragments of the model. Theoretical results on the expressive power of the MT are given. An efficient algorithm is proposed that can extract a triangulation from the MT, whose level of detail is variable over the domain according to a given threshold function. The algorithm works in linear time, and the extracted representation has minimum size among all possible triangulations that can be built from triangles in the MT, and that satisfy the given level of detail. Major applications of these results are in real-time rendering of complex surfaces, such as topographic surfaces in flight simulation.     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

Unique edge structure and stability of fabricated dimer islands on Si(001)

The edge structure and stability of monolayer-high islands fabricated on Si(001) surfaces by scanning tunneling microscopy have been analyzed theoretically. In contrast to the edges of similar islands grown by depositing Si, the properties of edges of fabricated islands are determined by the length of the trench of dimers that are removed to create the island. We demonstrate the possibility of controlling the edge structure, and thus the stability, through a selective process of atom removal.     

第二讲合成孔径声纳成像及其研究进展

文章在介绍了图像声纳的特点、合成孔径声纳（synthetic aperture sonar,SAS）产生背景和发展过程的基础上,对合成孔径声纳的原理、技术难点、成像算法等问题进行了讨论.着重分析了合成孔径声纳成像过程中高分辨率的获取方法、水声信道对成像的影响、多子阵技术及其成像算法、稳定的声纳运动平台和运动监测问题、运动补偿与自聚焦方法等.文章还给出了国内外合成孔径声纳研究的最新进展情况,进而展望了合成孔径声纳的应用前景.     

HL—1装置SiC涂层辐照实验的表面分析

本文应用表面分析技术研究HL-1装置中SiC涂层的等离子体辐照性能。结果表明,SiC材料应用于孔栏和壁涂层有利于减少杂质和提高等离子体品质。     

Directional crystallization and self-assembling initiated by mechanical shock or electron beam in nanocrystalline Co-C and Fe-C films

We investigated iron and cobalt films with 20% carbon concentration with nanocrystalline structure. One of the aims of this work is to analyze the physical nature of high-speed structural self-assembling as often happens in explosive crystallization processes in these films.