Atomic force microscopy study of surface morphology change in spinel LiMn2O4: Possibility of direct observation of Jahn-Teller instability

Surface morphology in 3.5 × 3.5 μm² area of spinel LiMn₂O₄, which is a typical cathode material for Li ion secondary batteries, is studied using an atomic force microscopy (AFM) with a conductive probe. Negative bias voltage is applied to the probe to attract Li⁺ ions toward LiMn₂O₄ surface during the AFM observation. Before applying the voltage (0 V), the whole LiMn₂O₄ surface is covered with scale-shaped grains. Under the negative voltage of 5.5 V, electric current abruptly increases, indicating Li⁺ ionic conduction. Simultaneously, part of the scale-shaped grains expand and flatten. Jahn-Teller phase transition, which is induced by the repulsive interaction between the Mn-e_g and O-2p electrons in Li accumulated layer, is proposed as a possible origin of these results.     

Surface structure of In/Si(1 1 1) studied by reflection high-energy positron diffraction

We have investigated a quasi-one-dimensional structure of In/Si(1 1 1) surface using reflection high-energy positron diffraction (RHEPD), which is sensitive to the topmost surface structure under the total reflection condition. From the rocking curves, we found that In atoms are located at two different vertical positions, i.e., 0.99 Å and 0.55 Å from the Si zigzag chain in both 4 × 1 (210 K) and 8 × 2 (60 K) phases.     

大力开展我国电磁兼容技术的科研工作及若干建议

：本文介绍了国际上关于环境电磁学及电磁兼容技术的一些科研进展情况,描述了电磁兼容的动态,最后并提出了若干建议.     

表面光学声子对柱形量子线中三次谐波振荡的影响

本文利用密度矩阵方法研究了表面光学声子对柱形量子线中三次谐波振荡的影响,并且导出了三次谐波振荡的表达式。然后,以GaAs柱形量子线为例作了数值计算。研究表明,当柱形量子线的横向半径d非常小时,电子和表面光学声子之间的耦合强度就非常大,表面光学声子对三次谐波振荡的影响就更强。     

Method for independent control of particle size and distance in rhodium epitaxy on TiO2(110)-(1×2) surface An STM study

A method for independent control of the particle size and distance is presented for rhodium epitaxy on TiO₂(110)-(1×2) surface. The real space imaging of the surface morphology was performed by scanning tunneling microscopy. The amount of the deposited rhodium was checked by Auger electron spectrometry. The method consists of two steps: (i) evaporation of 0.001–0.050 ML equivalent of rhodium at room temperature with a post-annealing at 1100 K (“seeding”); (ii) post-deposition of rhodium for growing of the Rh nanoparticles formed in step (i) (“growing”). The mechanism of this procedure is based on the large difference of the surface diffusion coefficient between Rh adatoms and Rh nanocrystallites larger than 1–2 nm. In the first step the average distance between the metal particles is controlled in the range 5–200 nm, the second step determines the particles size (2–50 nm). This work demonstrates that the diffusion processes of metal nanoparticles of different sizes and the growing modes of the crystallites can be studied in detail by application of seeded surfaces.     

实船撞击实验防撞装置的撞击力分析

实验研究了基于以钢丝绳为基本元件的新型柔性防撞装置的防护性能.利用DEWETRON数据采集仪及多通道同步采集传感器的信号,分析得到防撞装置在碰撞中受到的撞击力曲线.实验结果显示:靠近船舶撞击侧最近的非撞击侧位置受到的撞击力最大,属防护重点部位;在承受多次撞击后,防撞装置基本完好,且船舶在碰撞中的损伤也有所减低.     

Spontaneous evolution of nanotips on silicon surface below the laser ablation threshold

A low power density single-pulse laser irradiation of the Si surface has been used for the study of formation and self-organization of silicon nanotips. A two dimensional regular array of hillock-like nanotips has been created in the central region, a disturbed array comprising crossed lines of hillocks in the near-central region, and the “V”-shaped array in the peripheral region. Therefore, the long-range organization of hillocks changes from the center toward the periphery, following the Gaussian-like laser power profile. The evolution of hillocks due to the flow instability of molten silicon is equivalent to the instability of a liquid layer falling down a vertical plate. The novel result is that the hillock-like soliton structures can be identified with the lump solitons resulting from the nonlinear hydrodynamic instability evolution.     

Surface solitons at the interface between semi-infinite linear and thermal nonlinear optical media

We investigate numerically surface-wave solitons occurring at the interface between semi-infinite linear and thermal nonlinear optical media, with the refractive index of the linear medium being greater than that of the nonlinear medium (in the absence of light). We find that the threshold energy flows of the existence of the surface solitons depend on the linear refractive index difference of the two media. Their fitting empirical formula has been obtained. Furthermore, we elucidate that the optical beams propagating in thermal nonlinear optical media, either as a single surface soliton or as a dipole surface soliton, can be attracted to the surface, even when launched from far away.     

Experimental investigation of a modified Beckmann-Kirchhoff scattering theory for the in-process optical measurement of surface quality

An experimental investigation of a modified Beckmann-Kirchhoff scattering theory applied in an in-process optical measurement of surface quality is described. The proposed theory describes the scattered light intensity distribution from a surface with the additional layers, and can be employed to analyze the surface characteristics in in-process measurement. Based on light scattering principle and machine vision method, the surface roughness is extracted to testify the correction of the modified Beckmann-Kirchhoff scattering theory. The experimental apparatus consists of a collimated laser diode, a beam splitter, a screen, a measuring lens and a camera. Test specimens with different surface roughness are studied. The results obtained demonstrate the feasibility of in-process optical measurement of surface quality using the modified model.     

Ultrasonic cavitation erosion of gas nitrided Ti–6Al–4V alloys

Ultrasonic cavitation erosion experiments were performed on Ti–6Al–4V alloys samples in annealed, nitrided and nitrided and subsequently heat treated state. The protective oxide layer formed as a result of annealing and heat treatment after nitriding is eliminated after less than 30 min cavitation time, while the nitride layer lasts up to 90 min cavitation time. Once the protective layer is removed, the cavitation process develops by grain boundary erosion, leading to the expulsion of grains from the surface. The gas nitrided Ti–6Al–4V alloy, forming a Ti_xN surface layer, proved to be a better solution to improve the cavitation erosion resistance, compared to the annealed and nitrided and heat treated state, respectively. The analysis of the mean depth of erosion rate at 165 min cavitation time showed an improvement of the cavitation erosion resistance of the nitrided samples of up to 77% higher compared to the one of the annealed samples.