接触角法研究医用聚醚聚氨酯材料表面自由能与界面自由能

<正> 表面性质在医用材料与生物体的相互作用中起着至关重要的作用,如血液相容性材料的表面对血细胞具有吸附、变形、凝血、溶血等作用。表面能和界面能是医用材料的重要研究内容之一,材料的表面能及其极性与非极性分量在影响或控制材料与生物体的相互作用之面一直是医用材料的重要课题。Raier曾提出当材料的临界表面张力在20-30erg/cm~2时,血液相容性好,也有人认为,血液与材料的界面自由能趋于零时,才能     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

RuO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> mixed oxide composite coating for improvement of Al-alloy sacrificial anodes

It has been recently proved that RuO₂ can act as an effective surface activator of aluminum alloy sacrificial anodes. TiO₂ has the property of stabilizing RuO₂ coating and resisting biofouling on metal surfaces. Hence, a mixed oxide catalytic coating of TiO₂ and RuO₂ can enhance the galvanic performance of aluminum alloy sacrificial anodes and resists biofouling on the anode surface. In the present work RuO₂–TiO₂ mixed oxide was coated on aluminum alloy sacrificial anodes. The large and uniform porous nature of the coating was found to facilitate efficient ion diffusion. The coating was found to persist on the anode even after 3 months of galvanic exposure. The anode having an optimum combination of the mixed oxide had 70% TiO₂ as the major component in the coating. The catalytic coating significantly improved the performance of the anodes to a large extent.     

Fluorescence detection and quantitation of recombinant proteins containing oligohistidine tag sequences directly in sodium dodecyl sulfate-polyacrylamide gels

Two fluorophore-nitrilotriacetic acid conjugates, Pro-Q Sapphire 365 and Pro-Q Sapphire 488 oligohistidine gel stains, have been developed for the fluorescence detection of fusion proteins containing oligohistidine tags directly in sodium dodecyl sulfate polyacrylamide gels, without the requirement for electroblotting, reporter enzymes or secondary detection reagents. Pro-Q Sapphire 365 oligohistidine gel stain exhibits bright-blue fluorescence (emission maximum = 450 nm) when illuminated with UV-A or UV-B light from a standard ultraviolet transilluminator. Pro-Q Sapphire 488 oligohistidine gel stain exhibits bright-green fluorescence (emission maximum = 515 nm) when illuminated with visible light from a laser-based gel scanner equipped with a 470 nm second-harmonic generation (SHG) or 488 nm argon-ion laser source. Typically, 25-65 ng of oligohistidine-tagged fusion protein in whole cell lysates is detectable using either stain. After documenting the fluorescence signal from the Pro-Q Sapphire dyes, gels may be post-stained with the red-fluorescent SYPRO Ruby protein gel stain in order to reveal the total protein pattern.     

Influence of surface treatments in the initial stages of anodizing Al–Ag alloys in neutral electrolytes

Using voltage-time responses and cyclic voltammetry, the initial stages of anodizing of Al–2.1 at.% Ag and Al–4 at.% Ag alloys are shown to depend upon the heat treatment of the alloys and the pre-treatment of the alloy surfaces. Chemical polishing of solution-treated alloys leads to relatively uniform anodic oxidation on a relatively smooth alloy surface, in the absence of significant effects of coarse, silver-rich intermetallics. In contrast, losses of current to oxygen generation arise for the roughened alloy surface from mechanical polishing. With ageing, secondary reactions at the relatively silver-rich intermetallics are more prevalent, although the effects on the voltage-time response depend upon the balance between processes occurring on the matrix and intermetallic regions, including film growth, oxygen generation within the anodic film, film damage due to release of oxygen, dissolution of silver species and re-growth of damaged film.     

异烟酸在银溶胶上的表面增强喇曼散射及影响因素

本文研究了异烟酸吸附在银溶胶表面的表面增强喇曼散射(SERS)光谱以及卤素离子、溶液pH值及溶液浓度对异烟酸SERS光谱的影响。文章提出了离子在银溶胶表面的吸附方式,即主要以—COO~-端吸附于银溶胶表面。最后,对所述实验现象作了定性讨论。     

Surface modification of imide containing polymers I: Catalytic groups

This paper describes basic studies of the surface modification of polyimide covered wires for insulation of electrical machines. Drain-off of the impregnating resin during production should be reduced by introduction of surface catalytic groups. ¹H NMR kinetic analysis of aminolytic ring opening reaction of low molecular model compounds for polyimides showed very fast modification reactions. The catalytic effect of various functional groups on unsaturated polyester imide, acrylate and epoxy resins was investigated by DSC. Co(II)-catalysts and tertiary aliphatic amines proved highest activity for double bond containing systems and epoxy resins, respectively. Aminolytic treatment of Kapton^® slides was followed by ATR-IR spectroscopy. Plate-plate rheometer measurements of epoxy resins employing tertiary amine-treated Kapton^® slides proved significantly reduced gelling temperature.     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Structure and electronic transport properties of the Misfit layer compound (LaSe)1.14(NbSe2)2, „LaNb2Se5”︁

The new misfit layer compound (LaSe)_1.14(NbSe₂)₂ has been synthesized from the elements at 1050- and its structure has been determined by a composite approach. The structure has an alternating stacking sequence of [LaSe] and two [NbSe₂] layers along the c direction. The misfit of the two different layers is occurring along the a direction: a₁(LaSe)=6.0191 Å and a₂(NbSe₂)=3.4372 Å therefore yielding a ratio of 1.751 which is very close to 7/4. An investigation of electrical resistivity was done. The crystal shows superconducting properties at 5.3 K.