半导体单晶生长过程中的位错研究

阐述了现有的半导体单晶位错模型,即临界切应力模型和粘塑性模型的基本理论及应用状况.分析了熔体法单晶生长过程中影响位错产生、增殖的各种因素,以及抑制位错增殖的措施.与熔体不润湿、与晶体热膨胀系数相近的坩埚材料,低位错密度的籽晶可有效地抑制生长晶体的位错密度;固液界面的形状及晶体内的温度梯度是降低位错密度的关键控制因素,而两因素又受到炉膛温度梯度、长晶速率、气体和熔体对流等晶体生长工艺参数的影响.最后,对熔体单晶生长过程的位错研究进行了展望.     

Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37–53) while taking into account a large strain range (15–57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm². Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.     

A new interpretation of an event attributed to a magnetic monopole

An alternate and a new interpretation is given for the event attributed to a magnetic monopole by Price and coworkers found in an emulsion plastic sandwich stack flown from Sioux City, Iowa, USA on 18 September 1973. The electron pick-up and stripping cross-sections of nuclei ofZ∼70–80 andv∼0.6–0.7c in Lexan polycarbonate are calculated using the formulae given by Nikolaev. It is shown that the corresponding mean free paths are of the order of thickness (∼250μ) of Lexan plastic sheets used by them. In such a case asnapshot of these processes is believed to have been observed in plastic sheets. Monte-Carlo simulations of the event have been made for three values of charges at the top of the main Lexan stack, namelyZ=83, 78 and 70 respectively. The event is thus interpreted as a cosmic ray nucleus ofZ=70–83 andv=0.6–0.7c losing and capturing electrons (mainly the latter) as it passes through the stack. The probability of the occurrence of such an event is estimated by several methods.     

Computational Insight into Biotransformation Profiles of Organophosphorus Flame Retardants to Their Diester Metabolites by Cytochrome P450

Biotransformation of organophosphorus flame retardants (OPFRs) mediated by cytochrome P450 enzymes (CYPs) has a potential correlation with their toxicological effects on humans. In this work, we employed five typical OPFRs including tris(1,3-dichloro-2-propyl) phosphate (TDCIPP), tris(1-chloro-2-propyl) phosphate (TCIPP), tri(2-chloroethyl) phosphate (TCEP), triethyl phosphate (TEP), and 2-ethylhexyl diphenyl phosphate (EHDPHP), and performed density functional theory (DFT) calculations to clarify the CYP-catalyzed biotransformation of five OPFRs to their diester metabolites. The DFT results show that the reaction mechanism consists of Cα-hydroxylation and O-dealkylation steps, and the biotransformation activities of five OPFRs may follow the order of TCEP ≈ TEP ≈ EHDPHP > TCIPP > TDCIPP. We further performed molecular dynamics (MD) simulations to unravel the binding interactions of five OPFRs in the CYP3A4 isoform. Binding mode analyses demonstrate that CYP3A4-mediated metabolism of TDCIPP, TCIPP, TCEP, and TEP can produce the diester metabolites, while EHDPHP metabolism may generate para-hydroxyEHDPHP as the primary metabolite. Moreover, the EHDPHP and TDCIPP have higher binding potential to CYP3A4 than TCIPP, TCEP, and TEP. This work reports the biotransformation profiles and binding features of five OPFRs in CYP, which can provide meaningful clues for the further studies of the metabolic fates of OPFRs and toxicological effects associated with the relevant metabolites.     

Spectroscopy of light nuclei with skyrme-type interactions

Deformed Hartree-Fock calculations are performed for some light nuclei in a large configuration space consisting of first four major shells. The interaction employed is the modified Skyrme interaction in which the deformed density is replaced by the band averaged scalar density that makes the Hamiltonian rotationally invariant rendering the spectroscopic calculations feasible. It is shown that the introduction of density dependence spreads out the energy spectra and that the Skyrme variant SIV which has a weak density dependence gives best overall agreement for energy spectra and the available data for the electromagnetic properties of the nuclei studied. It is found that the maximum contribution to the energy of any state in the low lying spectrum comes from thes-state attractive ands-state repulsive parts of the Skyrme interaction. It is also shown that when two-body density dependent version of Skyrme interaction is used, the Koopmans theorem no longer holds.     

Effects of Organic Acids on the Release of Fruity Esters in Water: An Insight at the Molecular Level

It is well known that organic acids (OAs) could affect the flavour of fruit juices and beverages. However, the molecular mechanism of aroma release is still unclear. In this study, the effects of citric acid (CA), L-(-)-malic acid (MA) and L-lactic acid (LA) on the release of six selected esters and their sensory perception were investigated by means of HS-GC-MS analyses and odour detection threshold determination, respectively. Meanwhile, the density functional theory (DFT) calculation was employed to explore the interaction modes between esters and OAs. HS-GC-MS analyses showed that the concentration and the type of OAs regulated the release of esters. The results were basically consistent with the detection threshold change of those esters. The DFT calculation suggested that the main intermolecular interaction was hydrogen bonds, and several esters could form a ternary ring structure with OAs through hydrogen bonds. The interactions can induce the different release behaviours of esters in OAs water solution. The number of carboxyl functional groups in OAs and the spatial conformation of esters appeared to influence the magnitude of the interaction. The above results demonstrated the mechanism of OAs affecting the release of esters and indicated a possible flavour control way by using different OAs and OA concentrations.     

单层2H-MoTe2光电效应的理论研究

材料的禁带宽度是影响光电探测器探测范围的重要因素.单层2H-MoTe2因具有合适的禁带宽度引起了科研人员广泛的研究兴趣.本文基于非平衡态格林函数-密度泛函理论,采用第一性原理方法,研究了单层2H-MoTe2的光电效应.结果表明:在线性偏振光照射下,MoTe2产生的光电流函数与唯象理论相吻合;在光子能量范围1.6～1.8...     

An efficient method for computing the QTAIM topology of a scalar field: The electron density case

An efficient method for computing the quantum theory of atoms in molecules (QTAIM) topology of the electron density (or other scalar field) is presented. A modified Newton–Raphson algorithm was implemented for finding the critical points (CP) of the electron density. Bond paths were constructed with the second‐order Runge–Kutta method. Vectorization of the present algorithm makes it to scale linearly with the system size. The parallel efficiency decreases with the number of processors (from 70% to 50%) with an average of 54%. The accuracy and performance of the method are demonstrated by computing the QTAIM topology of the electron density of a series of representative molecules. Our results show that our algorithm might allow to apply QTAIM analysis to large systems (carbon nanotubes, polymers, fullerenes) considered unreachable until now. © 2012 Wiley Periodicals, Inc.     

Like‐Charge Attraction: A Combined Electrostatic–Hydrodynamic Approach

Abstract

This article discusses the like‐charge attraction of colloidal spheres close to a charged plate and compares results produced by an electrostatic and a hydrodynamic model with experimental data. Hydrodynamic coupling is shown to be the dominating effect, while the electrostatic influence may often be neglected. Some observations, however, can be explained only by means of a combined electrostatic–hydrodynamic model, which is derived in this work. The combined model is able to predict not only the attractive force between particles of similar charge close to a charged plate but also the change to a purely repulsive force once the sphere‐plate distance is further reduced. This prediction matches qualitatively results of experiments reported in the literature.     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117