A new polar supramolecular 3D framework [Zn(pyz)(H2O)4]pht

A new Zn(II) complex, [Zn(pyz)(H₂O)₄]pht (1) (pyz=pyrazine; pht=1,2-benzenedicarboxylate) has been hydrothermally synthesized and characterized. Complex 1 features a novel polar 3D framework with a 1D polycationic chain , between which pht²⁻ dianions are encapsulated via the supramolecular interaction. Its powder SHG is of about three times as large as that of KH₂PO₄.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

Synthetic approaches to parabens molecularly imprinted polymers and their applications to the solid-phase extraction of river water samples

In this paper we describe the synthesis, characterisation and use of two distinct molecularly imprinted polymers (MIPs) prepared using esters of p-hydroxybenzoic acid (parabens) as templates: one MIP was synthesised by precipitation polymerisation using a semi-covalent molecularly imprinting strategy with methyl paraben as the template/target (MIP 1); the second MIP was prepared in monolithic form through a conventional non-covalent molecular imprinting strategy, with butyl paraben as the template (MIP 2). MIP 1 recognized methyl paraben, showed cross-selectivity for other parabens analytes used in the study and higher affinity towards these compounds than did a non-imprinted control polymer. Similarly, MIP 2 demonstrated higher affinity towards paraben analytes than a non-imprinted control polymer.For the analysis of environmental water samples, a solid-phase extraction (SPE) protocol was developed using MIP 2 as sorbent, and results were compared to a SPE using a commercial sorbent (Oasis HLB). With MIP 2 as sorbent and butyl paraben as target, when percolating 500 mL of river water spiked at 1 μg L⁻¹ through the SPE cartridge, and using 1 mL of isopropanol as cleaning solvent, a higher recovery of butyl 4-hydroxybenzoate (butyl paraben) and a cleaner chromatogram where achievable when using the MIP compared to the commercial sorbent.     

Synthesis and photoluminescence stability of non-conjugated polymers based on fluorene and benzoxazole

A kind of non-conjugated blue luminescent polymer based on fluorene and benzoxazole was synthesized via solution condensation polymerization from 2,2-bis(3-amino-4-hydroxyphenyl)-propane and 2,7-dicarboxyl-9,9-dioctyl-fluorene and was characterized with H NMR, FT-IR, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), UV-vis absorption and photoluminescence (PL) spectroscopy. The polymer displayed the maximum photoluminescence emission peak at 415 nm and showed high PL spectroscopic stability. The green-to-blue emission intensity ratio I_Green/I_Blue is only 0.073 even after thermal annealing at 150 °C for 30 h. After being exposed to UV light for 30 min, no bathochromic emission or obvious crosslink is observed. The common phenomenon of greenish blue emission of fluorene-based polymer around 525 nm has been effectively restrained in this polymer by introducing the isopropylidene group into the backbone of polymer.     

A concise synthesis and electrochemical behavior of functionalized poly(thieno[3,4-b]thiophenes): New conjugated polymers with low bandgap

New thieno[3,4-b]thiophene derivatives were prepared via a short and versatile synthetic route. Electrochemical studies of 2-heptenylthieno[3,4-b]thiophene, 2-styrylthieno[3,4-b]thiophene, and 2-phenyl-3-(thieno[3,4-b]thiophene-2-yl)acrylonitrile and the corresponding polymers revealed that raising the HOMO and lowering the LUMO can be attained by functionalizing thieno[3,4-b]thiophene with aromatic resonance-enhancing and electron-withdrawing groups. The bandgap of resulting polymers varied from 0.78 to 1.0 eV, indicating that poly(2-phenyl-3-(thieno[3,4-b]thiophene-2-yl)acrylonitrile) is one of the lowest bandgap polymers ever reported.     

Self-assembly of a novel 2D network polymer: Syntheses, characterization, crystal structure and properties of a four-tin-nuclear 36-membered diorganotin(IV) macrocyclic carboxylate

The novel macrocyclic complex (n-Bu₂SnL)₄·2C₆H₆1 (LH₂ = naphthalene-1,4-dicarboxylic acid, C₆H₆ = benzene) has been synthesized by the reaction of di-n-butyltin oxide and rigid naphthalene-1,4-dicarboxylic acid. Single crystal X-ray diffraction analyse shows that complex 1 has a centrosymmetric tetranuclear diorganotin dicarboxylate with 36-membered macrocycle, which is formed by n-Bu₂Sn and ligand alternately linking. All four Sn atoms are hexacoordinated, and the coordination environment can be considered as a skew-trapezoidal bipyramidal with an anisobidentate coordination mode of the carboxylate groups. Luminescent property study of complex 1 has shown that the fluorescent peak was blue-shifted and the fluorescent intensity strengthened markedly compared with ligand. Pilot studies indicated that complex 1 has shown good antitumor activities. This complex 1 is likely to serve as a new model for further investigation on the structure-antitumor activity relationship.     

Preparation of a new Cd(II)-imprinted polymer and its application to determination of cadmium(II) via flow-injection-flame atomic absorption spectrometry

A new cadmium(II)-imprinted polymer based on cadmium(II) 2,2′-{ethane-1,2-diylbis[nitrilo(E)methylylidene]} diphenolate-4-vinylpyridine complex was obtained via suspension polymerization. The beads were used as a minicolumn packing for flow-injection-flame atomic absorption spectrometry (FI-FAAS) determination of cadmium(II) in water samples. Sorption effectiveness was optimal within pH range of 6.6-7.7. Nitric acid, 0.5% (v/v) was used as eluent. Fast cadmium(II) sorption by the proposed material enabled to apply sample flow rates up to 10 mL min⁻¹ without loss in sorption effectiveness. Enrichment factor (EF), concentration efficiency (CE) and limit of detection (LOD, 3σ) found for 120-s sorption time were 117, 39.1 min⁻¹ and 0.11 μg L⁻¹, respectively. Sorbent stability was proved for at least 100 preconcentration cycles (RSD = 2.9%). When compared to non-imprinted polymer the new Cd(II)-imprinted polymer exhibited improved selectivity towards cadmium(II) against other heavy metal ions, especially Cu(II) and Pb(II), as well as light metal ions. Accuracy of the method was tested for ground water and waste water certified reference materials and fortified water. The method was applied to Cd(II) determination in natural water samples.     

Microwave-assisted synthesis of pyrazolyl bistriazines

Reaction of 6-chloro-N,N′-bispyrazolyl-[1,3,5]triazine-2,4-diamines with 4-aminobenzylamine under microwave irradiation produces bistriazines in excellent yields. The use of a diamine bearing amino groups with different reactivities allowed the reaction to be carried out in two steps and selectively gave monotriazines, bistriazines with identical substituents and differently substituted bistriazines. The structures of these new compounds have been studied by NMR spectroscopy, mass spectrometry and in one case by X-ray crystallogrphy. These new bistriazines have promising applications in supramolecular chemistry based on hydrogen bonds and/or complexation with metals. The presence of a rigid linker can be used for the efficient preparation of extended supramolecular polymers with interesting fluorescence properties by complexation with cyanuric and barbituric acid derivatives.     

高分子电致发光材料研究进展

综述了近几年来国内外关于高分子聚合物在电致发光材料领域的研究进展,重点介绍了聚苯撑乙烯、聚芴类、聚噻吩类聚合物及其衍生物的相关研究成果,并讨论了当前高分子电致发光材料存在的关键问题及应用前景.     

Photo-oxidation behaviour of polyethylene/polyamide 6 blends filled with organomodified clay: Improvement of the photo-resistance through morphology modification

The impact of small amounts of organomodified clay (OMMT) on the photo-degradation behaviour of two blends obtained by mixing either low-density polyethylene (LDPE) or high density polyethylene (HDPE) with polyamide 6 (PA6) (LDPE/PA6 and HDPE/PA6 75/25 wt-%) was studied. The complex photo-degradation behaviour was followed by monitoring the main physical-mechanical properties of the blends. In particular, mechanical and spectroscopic tests were performed in conditions of accelerated artificial aging. An accurate mechanical and morphological characterization was previously carried out. The presence of the OMMT promotes the unexpected formation of a co-continuous morphology for the HDPE/PA6 blend without significantly improving the interfacial adhesion. Differently, the OMMT-filled LDPE/PA6 blend exhibits a finely distributed morphology, and some apparent improvement of the interfacial adhesion was noticed. Probably due to these differences in microstructure, a different impact of the nanoparticles on the photo-resistance behaviours was observed for the two families of samples. In particular, the HDPE-based nanocomposite blend exhibits an improved photo-resistance, while the opposite occurs for the LDPE-based system.