Photophysical processes and photochemical reactions involved in poly(N-vinylcarbazole) and in copolymers with carbazole units

This paper is devoted to the analysis of the photochemical behaviour of copolymers with carbazole units exposed to long-wavelength radiation. These copolymers are constituted of two types of carbazolylethyl methacrylate units (CEM) with octyl methacrylate moieties (OMA). The exposure of copolymers and PVK to UV light results in dramatic modifications of the physical and photophysical properties of the polymer. These modifications can be correlated with modifications of the chemical structure of the matrix. The photoageing of copolymers and PVK has been analysed by fluorescence, ESR, UV-vis and infrared spectroscopies. The effects of crosslinking and chain scissions were determined by gel fraction measurements and size exclusion chromatography.     

Synthesis and characterization of polymers containing linear sugar moieties as side groups

The synthesis of a water-soluble monomer, namely 4-vinylphenyl-d-gluco(d-manno)hexitol (4) derived from d-gluconolactone, is here presented. The homopolymerization of the vinylsugar has been conducted in both aqueous and organic media using free-radical initiators. High-molar-mass water-soluble polymers are obtained. The copolymerization behavior of the vinylphenyl sugar monomer with a hydrophilic monomer such as acrylamide, as well as with a hydrophobic monomer such as styrene, has been investigated. Statistical- and block-type copolymers have thus been prepared. The structures of the polymers were confirmed by NMR and their thermal properties examined by DSC.     

Sulfonated polypropylene ionomers

Polypropylene ionomers have been prepared by sulfonation of copolymers of propene and 7 methyl, 1-6 octadiene, followed by neutralization to cesium salts. Both WAXS and SAXS were used to study the morphology of the samples, while their thermal properties were studied by DSC and their mechanical properties by DMTA. The sulfonation process is shown to cause a further drop in crystallinity in addition to the effect of comonomer incorporation. Ion clustering is observed when the extent of sulfonation is high enough, the limit being dependent on the copolymer composition. The ion pairs which are not incorporated into the cluster cause a small-angle upturn in the WAXS pattern. The mechanical properties are strongly affected by the drop in crystallinity, but may be partly recovered due to ion clustering. No disruption of the ion clusters is observed before thermal decomposition of the polymer.     

Comportement tensioactif des copolymères amphiphiles a séquence hydrophile polyélectrolyte

Résumé La courbe représentant, en fonction de la concentrationc, la tension interfaciale entre le toluène et une solution aqueuse d'un copolymère á blocs amphiphile á séquence hydrophile polyélectrolyte (polystyrène-b-polyvinyl-2-pyridine quaternisée au bromure d'éthyle) est foncièrement différente de celle que l'on obtient avec les détergents classiques.Les longues séquences polyélectrolytes ancrées á l'interface y établissent entre les deux phases une différence de potentiel électrique bien supérieure á celle que l'on obtient avec les détergents classiques. Il en résulte que le système reste éloigné de l'équilibre thermodynamique. Comme les énergies d'activation des processus d'adsorption et de désorption sont de nature différente, les courbes (,c) etablies en concentration croissante et décroissante sont non seulement distinctes, mais de caractères différents.

---

Summary Plotting the water toluene interface tension against the concentrationc, one gets quite different behaviours using classical detergents (Sodium laurylsulfate) or ampholytic block copolymers with polyelectrolytic hydrophilic sequence. (polystyrene-b-polyvinyl-2-pyridine quaternized with ethylbromid).These polyelectrolytic sequences build at the interface a much larger electric potential drop than usual detergents do. It follows that the system keeps far away from the thermodynamic equilibrium. Since adsorption and desorption processes have activation energies of different natures, it turns out that the (,c) curves are quite different in characters if constructed in growing or fallingc values.

---

Zusammenfassung Kurven, welche die Wasser-Toluol-Grenzflächenspannung als Funktion der Konzentrationc wiedergeben, sind für gewöhnliche Tenside und für Ampholytblock-Copolymere mit einer polyelektrolytartigen Sequenz, völlig verschiedenDie polyelektrolytartige Sequenz bildet an der Grenzfläche einen weitaus größeren elektrischen Potentialsprung als gewöhnliche Tenside. Daraus folgt, daß man dem thermodynamischen Gleichgewicht fern bleibt, und, da Ad- und Desorptionsprozesse unterschiedliche Aktivationsenergien besitzen, sind die (,c) Kurven mit steigenden und fallendenc-Werten völlig verschieden.

     

Thermosensitive polymeric vesicles self-assembled by PNIPAAm-b-PPG-b-PNIPAAm triblock copolymers

PNIPAAm-b-PPG-b-PNIPAAm triblock copolymers were prepared by redox polymerization. The self-assembly behavior and thermosensitive property of the copolymers in water were studied using ¹H-NMR, TEM and a UV spectrophotometer. The results showed that the LCST of the copolymers was 32 °C, which was consistent with that of pure PNIPAAm. The copolymers could form a vesicular structure in an aqueous solution by self-assembly. The hollow structure of the PNIPAAm-b-PPG-b-PNIPAAm vesicles combined with the temperature-sensitive property may enable many potential applications of the vesicles.     

Morphology and transport properties of protons and methanol through partially sulfonated block copolymers

The morphological changes with different compositions of casting solvents in the membranes of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) were investigated with small-angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Using the single solvent of tetrahydrofuran (THF) and the solvent mixtures of methanol/THF with different compositions, the casting polymer solutions were prepared for the membrane fabrication. The proton conductivity and the methanol permeability of membranes were measured, and the effect of morphological changes on the casting solvents was discussed through Flory–Huggins theory. It was found that the sulfonated SEBS membranes were transformed from well ordered lamellar to disordered co-continuous structure and the morphological difference caused abrupt enhancement in the proton conductivity and the methanol permeability as the concentration of methanol in the mixed solvents (MeOH/THF) increased.     

In vitro ageing and degradation of PEG-PLA diblock copolymer-based nanoparticles

Diblock copolymers composed of poly(oxy-ethylene) (POE) and poly(dl-lactic acid) segments were synthesized by anionic polymerization of d,l-lactide using the oxyanion formed by reaction of the monohydroxyl monomethoxy-poly(ethylene glycol) on sodium hydride. For comparison, a similar copolymer was prepared by using tin octoate to catalyze the lactide polymerization. The copolymers were used to make nanoparticles, which were stored at 4 °C. After a few months under these storage conditions, a dramatic decrease of the poly(ethylene glycol) content was observed, however, the mean diameter of the nanoparticles was not affected. The degradation of the nanoparticles was investigated in vitro under conditions selected to mimic physiological conditions. Changes of characteristics were monitored by ¹H NMR, SEC, DLLS and CZE on nanoparticles and/or on the degradation by-products dissolved in the ageing medium. According to their nanometric dimensions, the microparticles degraded very slowly and there was no difference in behaviour between the sodium hydride and the stannous octoate-derived copolymers.     

Homo and block copolymers of tert-butyl methacrylate by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of tert-butyl methacrylate (tBMA) was investigated using cuprous bromide with different ligands, solvents, deactivators, etc. The polymerization in bulk and diphenyl ether solvent system performed using Cu(I)Br complexed with N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA) catalyst in conjunction with 2-bromopropionitrile as an initiator at room temperature showed a curvature in the first-order kinetic plot. The controlled polymerization in methanol solution resulted in slower rate of polymerization and lower molecular weights. Well-defined diblock copolymers of PSt-b-PtBMA synthesized by polystyrene bromo macroinitiator (PSt-Br) with Cu(I)Cl/PMDETA catalyst system yielded predetermined molecular weights and lower polydispersities. Otherwise, the Cu(I)Br/PMDETA catalytic system showed an inefficient polymerization of tert-butyl methacrylate with lower molecular weights and higher polydispersities. Subsequent hydrolysis of the homopolymer refluxed in dioxane with addition of HCl afforded well-defined poly(methacrylic acid).     

Multidentate carborane-containing Lewis acids and their chemistry: mercuracarborands

Macrocyclic Lewis acidic hosts with structures incorporating electron-withdrawing icosahedral carboranes and electrophilic mercury centers bind a variety of electron-rich guests. These compounds, the so-called mercuracarborands, are synthesized by a kinetic halide ion template effect that affords tetrameric cycles or in the absence of halide ion templates, cyclic trimers. Both types of mercuracarborands form stable host–guest complexes with anionic and neutral electron-rich molecules. The multidentate structure of mercuracarborand hosts has made these unique molecules ideal for catalytic and ion-sensing applications as well as for the assembly of supramolecular architectures.     

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers have been successfully prepared by the ring-opening polymerization of ε-caprolactone (CL) employing yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] as catalyst and double-hydroxyl capped PEGs (DHPEG) as macro-initiator. The triblock architecture, molecular weight, thermal and crystallization properties of the copolymers were characterized by NMR spectra, SEC, DSC and WAXD analyses. The isothermal crystallization behavior of the copolymers was investigated by POM analysis in detail, which is greatly influenced by the length of PCL and PEG blocks. On the POM micrograph of PEG_10,000-(PCL₈₆₀₀)₂, a unique morphology of concentric spherulites was observed due to the sequent crystallization of the PCL and PEG blocks.