TiO2 粉末催化剂光催化降解室内 空气中有机污染物

本文制备了一系列 TiO2粉末催化剂, 用光催化法降解室内空气中各种微量有机污染物,最终降解率 接近 100%. 考察了晶型对光催化剂性能的影响, 结果表明,锐钛矿型 TiO2 的催化性能最好. 最后,分析了 TiO2 光催化反应机理.     

Palladium-catalyzed C-N bond formation: synthesis of 1-aryl-1H-pyrazoles from β-bromovinyl aldehydes and arylhydrazines

Cyclic and acyclic β-bromovinyl aldehydes are cyclized with an array of arylhydrazines in toluene at 125 °C in the presence of a palladium catalyst and a phosphorus chelating ligand together with NaO^tBu to give 1-aryl-1H-pyrazoles in moderate to good yields.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

A high-resolution MAS NMR study on the potential catalysts Mo/HBeta for olefin metathesis: The interaction of Mo species with HBeta zeolite

The interfacial interaction of Mo species with the HBeta zeolite was studied by multinuclear MAS NMR, XRD and N₂ adsorption. As proved by the quantitative ²⁷Al MAS NMR, this interaction is so strong as to dealuminate the framework of HBeta, and leads to a new peak appearing at −14 ppm, which indicates the formation of crystalline Al₂(MoO₄)₃. This can also be detected by XRD measurements when the Mo loading is as high as 9.0 wt.%. The corresponding quantitative ²⁹Si and ¹H MAS NMR spectra show that the amount of silanols and Brønsted acidic sites decrease obviously with increasing Mo loading. This also reveals an interaction between Mo species and HBeta support through an oxygen bridge resulting from condensation with the hydroxyls on the support. At higher Mo loadings, the interaction is so strong that it results in an extraction of aluminum from the zeolite framework, and subsequently appearance of Al₂(MoO₄)₃ and loss of Brønsted acidic sites. These can be correlated to the low catalytic activity of Mo/HBeta in metathesis of ethylene and 2-butylene to propylene.     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Structural studies on ruthenium(II) complexes used in interphase catalysis for the hydrogenation of ketones

Structural studies were performed on catalytically active ruthenium(II) complexes used in interphases, by means of XAFS spectroscopy. The EXAFS investigations indicate that the complexes retain their structural integrity when they are embedded on polysiloxane matrices to form stationary phase materials. The AXAFS studies reveal that the variations in the catalytic activity of the complexes with different ligands can be correlated to the differences in the electronic structure around the active ruthenium center. The EXAFS investigations show that, in asymmetric transfer hydrogenation reactions catalysed by ruthenium(II) complexes, the co‐catalyst plays a crucial role not only in enhancing the catalytic activity, but also in determining the structure of the intermediate species. Copyright © 2007 John Wiley & Sons, Ltd.     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.     

Potentiometric studies on the complexation equilibria between some trivalent lanthanide metal ions and biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS)

Summary The chelation behaviour of some trivalent lanthanide and yttrium metal ion with biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS) has been investigated by potentiomotric measurements at 20±0.5°C in 75% (v/v) dioxane-water medium at various ionic strengths of sodium perchlorate. The method of Bjerrum and Calvin, as modified by Irving and Rossotti has been used to find out the values of (average number of ligand bound per metal ion) andpL (free ligand exponent). The formation constants of metal chelates have been computed on a PC-XT computer, using a program patterned after that of Sullivan et al. to give _n values using weighted least squares method. TheS _min values (S _min =²) have been calculated. The order of formation constants of chelates was found to be: La³⁺3+3+3+3+3+3+3+3+3+. The formation constants of the chelates formed have been correlated to size and ionization potentials of the metal ions.

---

Potentiometrische Untersuchungen der Komplexierungsgleichgewichte zwischen einigen trivalenten Metallionen und biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS)

Zusammenfassung Es wurde das Chelierungsverhalten einiger trivalenter Lanthanidenionen mit biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS) mittels potentiometrischer Messungen bei 20±0.5°C in 75% (v/v) Dioxan-Wasser bei verschiedener Ionenstärke an Natriumperchlorat untersucht. Die Methode nach Bjerrum und Calvin in der Modifikation nach Irving und Rossotti wurde zur Ermittlung der Werte (mittlere Anzahl an Liganden pro Metallion) undpL (Exponent an freiem Liganden) verwendet. Die Komplexbildungskonstanten wurden in Anlehnung an Sullivan et al. an einem PC-XT Computer errechnet. DieS _min-Werte (S _min=²) wurden ebenfalls bestimmt. Die Reihung der Chelatbildungskonstanten war: La³⁺3+3+3+3+3+3+3+3+3+. Die Bildungskonstanten sind mit der Größe und dem Ionisierungspotential der Metallionen zu korrelieren.