Y2O3 and MgO co-doped ceria based electrolytes

Electrolytes of Ce_1-x-y Y _x Mg _y O_2-0.5x-y were prepared with citrate method and were characterized by inductively coupled plasma-atomic emission spectrometry, energy dispersive spectrometry, powder X-ray diffraction, and impedance spectroscopy. The effect of composition on the structure, conductivity, and stability of the electrolytes were investigated. When 0≤x≤ about 0.2 and 0≤y≤ about 0.05, the electrolytes were all single phase materials of ceria-based solid solution. However, when y> about 0.05, the electrolytes became two-phase materials, Y³⁺ and Mg²⁺ co-doped ceria-based solid solution and free MgO. The sample with nominal composition of Ce_0.815Y_0.065Mg_0.12O_2-d showed ionic conductivity at 973 K close to or even a little higher than that of similarly prepared Ce_0.9Gd_0.1O_1.95, but had lower cost of raw materials and a little better stability in reducing atmosphere. The existing of free MgO improved the stability of the electrolytes in reducing atmosphere, but too much free MgO reduced the conductivity.     

Composition and spectral studies of polyaniline salts

Five different polyaniline salts have been prepared by chemical polymerization of aniline in aqueous solution of different acids. The polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Electron paramagnetic, electronic absorption, infrared spectral and conductivity measurements have been performed on the polyaniline salts and polyaniline bases. This composition and the extent of dopant in polyaniline salt systems have been determined. There is no definite correlation between the conductivity and the stoichiometric ratio between the polyaniline base and the acid, and also the spin concentration.     

Crystal structure and ionic conductivity of the series A2Bi24Mo8X2O68 (A = Ca, Sr and Ba and X = Cr and W) in the Bi2O3?MoO3 system

A series of A₂Bi₂₄Mo₈X₂O₆₈ compounds, Ca₂Bi₂₄Mo₈Cr₂O₆₈ (CBMC), Sr₂Bi₂₄Mo₈Cr₂O₆₈ (SBMC), Pb₂Bi₂₄Mo₈Cr₂O₆₈ (PBMC) and Ba₂Bi₂₄Mo₈W₂O₆₈ (BBMW) have been synthesized by the solid-state method and characterized by single crystal X-ray diffraction. The compounds index into the monoclinic P2/c system with a=11.687(4) ?, 5.784(2) ?, 24.728(9) ?, 101.911(6)°, Z=1; 11.673(6) ?, 5.775(3) ?, 24.670(2) ?, 101.757(8)°, Z=1; 11.638(3) ?, 5.790(1) ?, 24.655(6) ?, 101.716(4)°, Z=1 and 11.718(6) ?, 5.818(3) ?, 24.716(12) ?, 101.835(9)°, Z=1 for CBMC, SBMC, PBMC and BBMW, respectively. The structures were solved by direct methods and refined to R indices of 0.081, 0.065, 0.080 and 0.079 respectively. These compounds are isostructural with Bi₂₆Mo₁₀O₆₉ and the structure consists of columns of [Bi₁₂O₁₄] along the b-axis, surrounded by Mo/Cr/WO₄ tetrahedra. a.c. impedance studies indicate higher values of ionic conductivity for the tungsten-substituted compounds. Supplementary material The crystal data of CBMC, SBMC, PBMC and BBMW have been deposited at the Fachinformationszentrum Karlsruhe (FIZ) with the numbers CSD 415143, CSD 415145, CSD 415144 and CSD 415142, respectively.     

二甲基甲酰胺中四种钕盐的电导

通过电导测量研究了四种钕盐：Nd(CF3SO3)3、Nd(ClO4)3、Nd(NO3)3和NdCl3在极性非质子溶剂DMF中的电导性质.利用线性拟合方法求得在25 ℃下Nd(CF3SO3)3和Nd(ClO4)3的极限摩尔电导率分别为278.8和 280.7 S•cm2•mol－1.用间接方法求得Nd(NO3)3 与NdCl3 的极限摩尔电导率分别为297.2和287.3 S•cm2 •mol－1.在25～65 ℃温度范围内，Nd(CF3SO3)3和Nd(ClO4)3的电导率随温度呈线性变化. Nd(NO3)3和NdCl3的电导行为表现出明显的离子缔合.     

Ion chromatographic separation of alkylsulphonic acids with conductivity detection

Summary An ion chromatographic (IC) method has been developed for the separation of alkylsulphonic acid. Two different stationary phases, silica-based and polymer-based ion-exchange resins, were studied using pure ion exchange and/or hydrophobic interaction mechanisms. Correlations between analyte hydrophobicity and eluent polarity were made in order to investigate the possibility of changing the dominant separation mechanism by varying the eluent composition. The alkyl chain lengths of the sulphonic acids analysed ranged from C₁ to C₉. Detection limits in the submicromolar range were obtained by suppressed conductivity detection.     

高电导率的a—SiHY合金的低温电导特性

用射央求地在硅单晶衬底上沉积出电导率高达６０Ｓ／ｃｍ的ａ－ＳｉＨＹ合金薄膜。在２０－３００Ｋ，对于钇含量高的样品，其电导仍是热激活的。ｌｇσ与１／Ｔ的关系曲线能够被拟合成斜率不同的两条直线，直线的斜率和两直线间拐点所地 温度依赖于膜中钇的含量。但对钇含量低的薄膜，电导对温度的依赖关系度为σ∝ｅｘｐ（－１／Ｔ＾１／４）。结果表明，这些钇含量不同的样品在没的温度范围内具有不同的导电机制。     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.     

Polyaniline and polypyrrole: A comparative study of the preparation

Aniline and pyrrole have been oxidized with ammonium peroxydisulfate in aqueous solutions, in the presence of equimolar quantities of hydrochloric acid. The oxidation of pyrrole was faster; the induction period typical of aniline oxidation was absent in the case of pyrrole. As the proportion of oxidant-to-monomer molar concentration increased up to 1.5, the yield increased in both cases. Similarities between the two oxidations are illustrated and discussed. The oxidant-to-monomer molar ratio 1.25 is proposed to be the optimum stoichiometry, in the accordance with the data published in the literature. The conductivities of the polymers prepared were only slightly dependent on the oxidant-to-monomer ratio in the range 0.3-1.5, and were of the order of 10⁰ S cm⁻¹ for polyaniline and ∼10⁻²-10⁻¹ S cm⁻¹ for polypyrrole. Outside this interval, the conductivity of both polymers was reduced. Polyaniline having conductivity ∼10 S cm⁻¹ was produced in solutions of phosphoric acid of various concentrations. On the contrary, the conductivity of polypyrrole was reduced as the concentration of phosphoric acid became higher. The type of protonation is discussed with the help of FTIR spectra by analyzing the ammonium salts obtained after deprotonation. Sulfate or hydrogen sulfate anions produced from peroxydisulfate always constitute a part of the counter-ions.     

酞菁,酞菁铁及酞菁镍电子性质的理论研究

以双片层分子为晶体单胞模型，用量子化学具有晶体轨道的ＥＨＭＯ方法研究了酞菁、酞菁铁及酞菁镍的导电性能，讨论了碘掺杂对它的影响。计算结果表明：由于碘掺杂后，系体构型发生了较大的变化，层间作用加强，从而前述几种晶体的能隙均显著降低，电导率大幅度提高。     

Electrical conductivity measurements of aqueous sodium chloride solutions to 600°C and 300 MPa

Electrical conductance measurements of dilute (<0.1>^–1) aqueous NaCl solutions were made primarily to quantify the degree of ion association which increases with increasing temperature and decreasing solvent density. These measurements were carried out at temperatures from 100 to 600°C and pressures up to 300 MPa with a modified version of the apparatus used previously in the high temperature study in this laboratory. Particular emphasis was placed on conditions close to the critical temperaturelpressure region of water, i.e., at 5° intervals from 370 to 400°C. The results verify previous findings that the limiting equivalent conductance A_o of NaCl increases linearly with decreasing density from 0.75 to 0.3 g-cm^–1 and also with increasing temperature from 100 to 350°C. Above 350°C. A_o is virtually temperature independent. The logarithm of the molal association constant as calculated exclusively from the data400°C is represented as a function of temperature (Kelvin) and the logarithm of the density of water (g-cm^–3) as follows: